TUMMASTER J09

Contents

TUMMASTER ARGB Fan Controller J-09 User Manual

Model: J-09 | Brand: TUMMASTER

1. Introduction

The TUMMASTER ARGB Fan Controller J-09 is designed to provide comprehensive control over your PC case fans and ARGB lighting. This hub supports up to nine PWM fans and nine 5V ARGB devices, allowing for synchronized lighting effects and efficient fan speed regulation. Its magnetic design ensures easy installation within your computer chassis, and it comes with a remote control for convenient operation.

Video: TUMMASTER ARGB Hub Overview and Features

2. Package Contents

Please check the package for the following items:

  • 1 x TUMMASTER ARGB Fan Controller Hub (J-09)
  • 1 x RF Remote Control
  • 1 x SATA Power Cable
  • 1 x 5V 3-Pin ARGB Sync Cable
  • 1 x PWM Sync Cable
TUMMASTER ARGB Fan Controller J-09 and included cables

Image: The J-09 controller with its remote and connecting cables.

3. Specifications

FeatureDescription
Model NumberJ09
TypeLight Controller/HUB
Brand NameTUMMASTER
OriginMainland China
CertificationCE, FCC
Applicable ToComputer, Chassis
Assembly RequiredNo
Dimensions (L*W*H)4.72 x 2.2 x 0.73 inches (120 x 56 x 18.5 mm)
LED Voltage5V DC
Fan Voltage12V DC
Current7A
MountingMagnetic
Ports9x 4-Pin PWM, 9x 5V 3-Pin ARGB, 1x Reset, 1x Power, 1x Motherboard Sync, 1x FP
TUMMASTER J-09 ARGB Fan Controller dimensions and port details

Image: Detailed view of the J-09 controller with dimensions and port labels.

4. Setup and Installation

Follow these steps to install your TUMMASTER ARGB Fan Controller J-09:

  1. Placement: The controller features a magnetic design, allowing it to be conveniently placed on any iron surface inside your computer case.
  2. Power Connection: Connect the provided SATA power cable to the controller's 'POWERIN' port and to an available SATA power connector from your power supply.
  3. Fan Connections:
    • Connect your 4-Pin PWM fans to the 'PWM' ports on the controller. The controller supports up to 9 fans.
    • Important: The red PWM fan port (usually labeled 'FAN 1' or similar) must be connected first. This port is used by the motherboard to read fan speed.
    • Due to the limitation of PWM motherboard IC reading principles, the motherboard can only recognize the speed of the single fan plugged into the red connector.
  4. ARGB Device Connections:
    • Connect your 5V 3-Pin ARGB devices (fans, light bars, etc.) to the 'ARGB' ports on the controller. The controller supports up to 9 ARGB devices.
    • Critical Note: Ensure the ARGB port input is 5V and the fan port input is 12V. Carefully observe the arrow marked on the plug of your ARGB device and insert it in the 5V direction. Incorrect insertion can damage the device.
  5. Motherboard Synchronization (Optional):
    • If your motherboard supports 5V 3-Pin ARGB (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync), connect one of the provided 5V 3-Pin ARGB or 5V-VDG MB sync cables from the controller's 'M/B' port to the corresponding ARGB header on your motherboard.
    • If your motherboard does not support 5V-ARGB, you do not need to connect this cable. The controller can operate independently using the remote.
  6. PC Restart Button Connection (Optional): Connect your PC's restart button cable or a special LED key to the 'RESET' port on the controller. This allows you to switch the light mode using the PC's reset button.
TUMMASTER J-09 ARGB Fan Controller wiring diagram

Image: Wiring diagram for connecting fans, ARGB devices, power, and motherboard sync to the J-09 controller.

5. Operating Instructions

The TUMMASTER ARGB Fan Controller J-09 can be operated using the included RF remote control or via motherboard synchronization (if connected).

5.1 Remote Control Functions

The remote control provides direct access to various lighting and fan speed settings:

TUMMASTER J-09 ARGB Fan Controller remote control key description

Image: Layout of the remote control with button descriptions.

  • On (AUTO): Turns on the lights and activates demo mode.
  • Off: Turns off the lights.
  • S+ / S-: Switches between previous and next lighting modes.
  • M+ / M-: Increases or decreases light brightness (for static modes).
  • Fan Speed Up / Fan Speed Reduction: Adjusts the fan speed.
  • Color Buttons: Selects various static colors.
  • Remote Pairing (Lock/Unlock): Press any button 5 times in a row to lock or unlock the remote control for one-to-one matching. The remote's red light will flash twice to confirm.

5.2 Motherboard Synchronization

If the controller is connected to a compatible 5V 3-Pin ARGB header on your motherboard, you can control the lighting effects through your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync). The remote control may be overridden or work in conjunction with the software, depending on your motherboard's implementation.

6. Maintenance

To ensure optimal performance and longevity of your ARGB Fan Controller:

  • Keep the controller and cables free from dust. Use compressed air or a soft brush to clean periodically.
  • Ensure all connections are secure and free from obstruction.
  • Avoid exposing the controller to extreme temperatures or humidity.
  • Do not attempt to disassemble the controller, as this will void any potential warranty.

7. Troubleshooting

  • No Power to Fans/ARGB:
    • Check if the SATA power cable is securely connected to both the controller and the power supply.
    • Ensure your power supply is providing adequate power.
  • ARGB Lights Not Working/Incorrect Colors:
    • Verify that all ARGB devices are correctly plugged into the 5V 3-Pin ARGB ports, paying close attention to the arrow on the connector to ensure correct polarity (5V direction).
    • Confirm that your ARGB devices are 5V 3-Pin and not 12V 4-Pin. Connecting a 12V device to a 5V port can cause damage.
    • If using motherboard sync, ensure the sync cable is properly connected and the motherboard's RGB software is configured correctly. Try using the remote control to rule out software issues.
  • Fans Not Spinning/Incorrect Speed:
    • Ensure all PWM fans are securely connected to the 4-Pin PWM ports.
    • Confirm that the fan connected to the red PWM port is functioning correctly, as this is the primary fan for speed detection.
    • If using motherboard sync, check your motherboard's BIOS/UEFI or fan control software settings.
    • Try adjusting fan speed using the remote control.
  • Remote Control Not Responding:
    • Ensure there are no obstructions between the remote and the controller.
    • Try re-pairing the remote by pressing any button 5 times in a row until the red light flashes twice.
    • Check the remote control's battery.

8. User Tips

  • For a clean build, utilize the magnetic base of the controller to attach it to an inconspicuous metal surface within your PC case.
  • When connecting multiple fans, plan your cable routing to minimize clutter and ensure good airflow.
  • Experiment with both remote control and motherboard software (if applicable) to find your preferred lighting effects and fan curves.
Example of a PC build with ARGB fans and controller

Image: An example of a PC setup utilizing ARGB fans, demonstrating potential aesthetic outcomes.

9. Warranty and Support

For warranty information or technical support, please refer to the official TUMMASTER website or contact your retailer. Keep your proof of purchase for any warranty claims.

A digital version of this user manual is available for download at the following link: TUMMASTER J-09 User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.