Product Overview
Thank you for purchasing the Air 5/Air 5 Pro Max Air Pump from ETENWOLF. This product is a versatile and powerful electric air pump designed for both inflation and deflation, featuring a built-in camping light and power bank functionality. Each unit has been carefully tested to ensure maximum performance and security.
Key Features:
- Small lithium electric pump suitable for outdoor activities such as inflating mattresses, sleeping mats, self-inflating air cushions, swimming rings, and inflatable pools.
- High-capacity 10400mAh lithium battery.
- High-speed inflation: 720 L/Min (25.7 CFM) at 0 PSI, with a maximum air pressure of 0.65 PSI (4.5 kPa).
- 100% duty cycle, allowing continuous operation without breaks.
- Supports 10W PD fast charging.
- Integrated lighting function with customizable lumen settings.
- Power bank function for charging external devices.
- Deflation function for quick storage.
Package Contents:
- ETENWOLF AIR 5 PRO MAX Air Pump x1
- A-C Charging Cable x1
- Gas Nozzles x5 (various types for different inflatables)
- Lampshade x1
- User Manual (PDF reference available at PDF User Manual)


Setup and Operation
Inflation Steps:
- Attach the appropriate nozzle clockwise onto the inflation port of the pump.
- Long-press the Start/pause power button for 2 seconds to activate the pump.
- Connect the nozzle to the object to be inflated and press the Start/pause power button to begin inflation.
- Press the Start/pause power button again to stop inflation.
Important Note: The air pump requires manual stopping; it will not stop automatically. Always check the allowable pressure of the object before use. Over-inflating may cause the object to burst.

Deflation Steps:
- Attach the appropriate nozzle clockwise onto the deflation port of the pump.
- Follow steps 2 through 4 from the Inflation Steps section to activate and operate the pump for deflation.
Important Note: The air pump requires manual stopping for deflation; it will not stop automatically.
Nozzle Usage:
The pump comes with five types of nozzles to accommodate various inflatables:
- Air Mattress/Floating Bed/Air Pillow: Use the nozzle with a 19.8mm diameter.
- Vacuum Storage Bag: Use the nozzle with a 30.1mm diameter.
- Swimming Ring/Inflatable Toy: Use the nozzle with a 5.9mm diameter.
- Camping Sleeping Pad: Use the nozzle with a 26.3mm diameter.


Operating Instructions
Inflation and Deflation Speeds:
- Long-press the power button for 2 seconds to turn on the device.
- Press the power button once more to initiate high-speed operation.
- Within the first 5 seconds of high-speed operation, press the power button a second time to switch to low-speed operation.
- Press the power button a third time to stop the operation.
- If the high-speed fan has been operating for more than 5 seconds, pressing the power button will stop the operation immediately.
High Speed Flow: 26 CFM (Cubic Feet Per Minute) / 720 LM (Liters per Minute)
Low Speed Flow: 16 CFM (Cubic Feet Per Minute) / 450 LM (Liters per Minute)
To turn off the device, including the LED light, long-press the power button for 2 seconds from any operating state.

Camping Light Function (Pro Max only):
- Press the light button to turn on the light when the pump is activated.
- Level 1 Light: 120 lumens, with a lighting duration of 80 hours (under full charge).
- Level 2 Light: 400 lumens, with a lighting duration of 20 hours (under full charge).
- Level 3 Light: 1200 lumens, with a lighting duration of 6 hours (under full charge).
- Strobe light and SOS signal functions are also available.
Note: Do not activate inflation or deflation when using the lampshade. The lampshade is designed to soften the light. To use the lampshade, stop any inflation or deflation process and then place the lampshade over the inflation port.


Maintenance
Battery Charging:
Always use a certified charger that provides a voltage of 5V and a maximum charging current of 3A (5V/3A).
Battery Indicator:
- 0-10% Charge: Orange flashing
- 10%-30% Charge: Orange solid
- 30%-100% Charge: White solid
While Charging:
- 0-99% Charge: White flashing
- 100% Full Charge: White solid
Battery Capacity:
- Air 5: 5200mAh x 3.7V (19.2Wh)
- Air 5 Pro Max: 10400mAh x 3.7V (38.5Wh)
Charging Time:
- Air 5: 2 hours (with 5V/3A charger)
- Air 5 Pro Max: 4 hours (with 5V/3A charger)


General Care:
- Charge the device at least once every six months to maintain optimal battery performance.
- This product is not waterproof. Do not immerse it in water or expose it to rain.
Troubleshooting
Common Issues:
- Red Flashing Light: This indicates a high temperature warning or overload. Check for any blockages in the vent holes.
- Unable to Charge: Ensure you are using a compatible 5V/3A certified charger.
- Pump Not Operating: Verify that the vent holes are not obstructed. Do not insert any objects into the inflation or deflation connectors.
Specifications
| Feature | Specification |
|---|---|
| Name | Air 5/Air 5 Pro Max Air Pump |
| Dimensions | 2.8 inches x 2.4 inches x 4.1 inches |
| Item Weight | 745g |
| Material | Plastic |
| Pressure | High speed flow: 0.65PSI/4.5kPa Low speed flow: 0.5PSI/3.5kPa |
| Inflation/Deflation Speed | High speed flow: 26CFM/720LM Low speed flow: 16CFM/450LM |
| Battery Capacity | Air 5: 5,200mAh Air 5 Pro Max: 10,400mAh |
| Charging Time | Air 5: 2 hours (5V/3A) Air 5 Pro Max: 4 hours (5V/3A) |
| Operating Temperature | Charging: 0°C-45°C (30°F-113°F) Operating: -20°C~70°C (-4°F ~158°F) |
| Storage Temperature | -20°C~60°C (-4°F ~140°F) |
| Brightness of Light | 120 lumens (80 hours) 400 lumens (20 hours) 1200 lumens (6 hours) |


Warranty and Support
2-Year Warranty Coverage:
Within two years of purchase, ETENWOLF will provide timely and effective online after-sale service. Any defective product (due to manufacturing fault) will be repaired or replaced within this warranty period.
Manufacturer Information:
Manufacturer: Guangdong Bestek Technology Co., Ltd
Address: No.1, North Gaopu 8th Road, Yuancheng Industrial Park, Heyuan City, Guangdong, P.R.China
Brand Owner Information:
Brand owner: Mozhen Technology (Shenzhen) Co., LTD
Address: CN-503, Floor 5, Building 4, Tianan Yungu Industrial Park Phase II, Gangtou Community, Bantian Street, Longgang District, Shenzhen, Guangdong, CN
Phone: (+1) 866-720-9226 (Mon-Fri 8 am-5 pm PST)
Email: support@etenwolf.com
Website: https://etenwolf.com
Facebook: www.facebook.com/etenwolftools
Made in: P.R.C
Safety Warnings:
- This appliance is intended for adult use only.
- Do not drop the unit into water or expose it to rain or other water sources.
- Children should be supervised to ensure they do not play with the appliance.
- Do not obstruct vent holes or open sources. Do not insert objects into the inflation or deflation connector.
User Tips
No specific user tips were available from provided reviews or Q&A. Always refer to the official instructions for optimal use and safety.