Introduction
Thank you for choosing the Portable Jump Starter with Air Compressor. This versatile 4-in-1 device is designed to provide reliable assistance in various emergency situations. It functions as a powerful car jump starter, a precise tire inflator, an emergency power bank for your electronic devices, and features an integrated LED light for illumination. Please read this manual thoroughly before use to ensure safe and optimal operation.
Package Contents
- Portable Jump Starter Unit (Model CC-CP12)
- Smart Battery Clip (Jump Cables)
- Inflation Tube
- Various Air Nozzle Fittings
- USB-C Charging Cable
- Storage Bag
Setup
Initial Charging
Before first use, fully charge the jump starter unit. Connect the provided USB-C charging cable to the Type-C input port on the device and to a 5V/2A USB power adapter (not included). The display will indicate charging status. A full charge typically takes 4-5 hours for the 8000mAh model.
Familiarizing with the Device
The device features an LCD full touch screen for easy operation. It includes a cooling grille for heat dissipation and an insulating case for safety and durability.
Operating Instructions
1. Tire Inflation
This device can inflate tires for cars, motorcycles, bicycles, and various balls. It features a preset tire pressure function with automatic stop.
- Connect the inflation tube: Screw the inflation tube onto the tire valve.
- Power On: Press and hold the power button (labeled "U" or similar icon) to turn on the device.
- Select Inflation Mode: Click the mode selection button (circular arrow icon) to choose the appropriate inflation mode (e.g., car, motorcycle, bicycle, ball).
- Set Pressure: Use the '+' and '-' buttons to set the desired tire pressure.
- Start Inflation: Click the inflation button (power icon) to begin inflating. The device will automatically stop when the preset pressure is reached.
2. Vehicle Jump Starting
The jump starter is suitable for 12V vehicles. Ensure the device is sufficiently charged before attempting a jump start.
- Connect the cable clip: Plug the smart battery clip (jump cables) into the jump starter unit's designated port.
- Connect to Battery: Attach the red clamp to the positive (+) terminal of the vehicle battery and the black clamp to the negative (-) terminal.
- Start the Vehicle: Get into the car and start the engine.
- Remove Clamps: Once the car starts, immediately remove the black clamp, then the red clamp, and finally disconnect the cable clip from the jump starter unit.
3. Emergency Charging (Power Bank)
Use the USB output port to charge your mobile phones, tablets, or other USB-powered devices. The device provides multiple output options: 5V/3A, 9V/2A, and 12V/1.5A.
4. LED Light
The integrated LED light can be activated for illumination during emergencies or low-light conditions. Refer to the device's interface for the light control button (typically a light bulb icon).
Maintenance
- Charging: Recharge the device fully after each use, especially after jump-starting a vehicle, to prolong battery life. Store it with at least 50% charge if not used for extended periods.
- Storage: Store the jump starter and its accessories in the provided storage bag in a cool, dry place, away from direct sunlight and extreme temperatures. The insulating case helps protect the internal components.
- Cleaning: Use a soft, dry cloth to clean the device. Ensure the cooling grille is free from dust and debris to maintain optimal performance. Do not use liquid cleaners.
- Battery Care: The device uses a 43114 polymer battery with a cycle life of 5000 times. Avoid fully discharging the battery frequently to maximize its lifespan.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Battery is depleted. | Charge the device fully using the USB-C cable. |
| Tire inflation is slow or not working. | Inflation tube not securely connected; incorrect mode selected; tire valve blocked. | Ensure the inflation tube is tightly screwed onto the valve. Select the correct inflation mode. Check tire valve for obstructions. |
| Vehicle does not jump start. | Jump starter battery low; clamps not properly connected; vehicle battery severely damaged. | Ensure jump starter is fully charged. Verify correct connection of red (+) and black (-) clamps. If the vehicle battery is severely damaged, professional assistance may be required. |
| Display shows an error message. | Internal fault or specific operational error. | Refer to the device's on-screen error codes (if any) or contact customer support. Try restarting the device. |
Specifications
| Feature | Specification (Model CC-CP12 8000mAh) |
|---|---|
| Model | CC-CP12 (8000mAh variant) |
| Color | Black |
| Material | PC/ABS |
| Charging Pressure Range | 0.35-10.3 Bar / 5-150 PSI |
| Cylinder Bore | 22mm |
| Working Current | ≤8A |
| Operating Voltage | 14.8V |
| Type-C Input | 5V / 2A |
| USB Output | 5V/3A, 9V/2A, 12V/1.5A |
| Battery Specification | 43114 Polymer Battery |
| Battery Capacity | 8000mAh (2000mAh*4S) |
| Charging Time | 4-5 hours |
| Measurement Error | ±1 PSI |
| Operating Temperature | -20℃ to 60℃ |
| Suitable Vehicle Type | 12V, 2.0L (for 8000mAh model) |
| Starting Current | 300A |
| Peak Current | 1000A |
| Product Net Size | 182mm x 90mm x 60mm |
User Tips
- Regular Charging: Keep your jump starter charged, especially before long trips, to ensure it's ready for emergencies.
- Cold Weather Performance: This device is designed to perform well in cold conditions, making it a reliable tool for winter emergencies.
- Auto-Stop Inflation: Utilize the preset pressure and auto-stop feature for accurate and hassle-free tire inflation.
- Power Bank Convenience: Don't forget to use the USB output to keep your essential electronic devices charged on the go.
Frequently Asked Questions (FAQ)
- Q: How do I charge the device?
- A: Connect the provided USB-C cable to the device's Type-C input and a 5V/2A USB power adapter. The device will indicate charging status on its display.
- Q: What certifications does this product have?
- A: The product holds CE, RoHS, and FCC certifications, along with MSDS and UN 38.3 for battery safety, meeting various international import needs.
- Q: How is product quality guaranteed?
- A: The manufacturer implements a two-stage quality control process during production and before shipping, maintaining a defective rate below 2%.
Warranty and Support
This product is manufactured by Shenzhen Baihao Technology Co., Ltd. The company adheres to ISO9001 standards for quality management.
For any product-related inquiries, technical support, or warranty claims, please contact the manufacturer directly via WhatsApp: +86 15013439327.
Please retain your purchase receipt for any warranty services.