CS Digital Torque Wrench Adapter

Contents

CS Digital Torque Wrench Adapter User Manual

Model: Digital Torque Wrench Adapter (BDA Series)

1. Introduction

The CS Digital Torque Wrench Adapter is a versatile and compact electronic tool designed to convert any standard ratchet wrench into a precise digital torque wrench. It features a large, clear LCD screen for convenient data reading and offers full functionality for various torque measurement tasks. This adapter is ideal for applications in machinery, aviation, railway, maintenance, inspection, and other fields requiring accurate torque control.

Front view of the Digital Torque Wrench Adapter with display
Figure 1: Front view of the Digital Torque Wrench Adapter

2. Safety Information

Please read and understand all safety instructions before using the Digital Torque Wrench Adapter. Failure to follow these instructions may result in injury or damage to the device.

Battery Safety Warnings:

Back view of the adapter showing battery warning label
Figure 2: Back view with battery warning label
  • This device uses non-rechargeable AAA (1.5V) x 2 batteries.
  • Do not dispose of batteries in fire or expose them to high temperatures.
  • Do not disassemble, short circuit, crush, or modify the batteries.
  • Always replace both batteries at the same time with new ones of the same type.
  • Ensure correct polarity when installing batteries.

3. Components and Features

Familiarize yourself with the main components and controls of your Digital Torque Wrench Adapter:

Diagram of components and features including LCD, buttons, and battery cap
Figure 3: Components and Features Diagram
  • LCD: Digital display for torque readings, mode, and units.
  • (+) Increase Button: Used to increase values or navigate menus.
  • (-) Decrease Button: Used to decrease values or navigate menus.
  • P/T Button (Peak/Trace): Toggles between Peak Hold mode (P) and Trace mode (T).
  • Power On/Off Button: Turns the device on or off.
  • M Button (Memory/Mode): Used to select units or access memory functions.
  • Battery Cap: Cover for the battery compartment.

4. Specifications

The Digital Torque Wrench Adapter is available in several models, each with specific torque ranges and drive sizes:

Image showing different models of the torque adapter with their respective drive sizes
Figure 4: Different models and their drive sizes
FeatureSpecification
MaterialABS + Steel
ColorBlack
Battery2 x AAA (1.5V, not included)
Accuracy±2%
Memory50 readings
Resolution0.1
Accuracy Guarantee Range20-100% of max torque
ModesPeak / Trace
UnitsNm / Kg.c-m / Kg.m / lb.in / lb.ft
Auto Shut-off70 seconds (if inactive)
Item Size75 x 45 mm (3.0 x 1.8 in)

Model Specifics:

ModelDisplay RangeAlarm RangeDrive SizeItem WeightPackage Weight
BDA2-0300.3-30 Nm1.5-30 Nm1/4"140g (4.9oz)250g (8.8oz)
BDA3-1351.35-135 Nm6.8-135 Nm3/8"210g (7.4oz)320g (11.3oz)
BDA4-2002-200 Nm10-200 Nm1/2"210g (7.4oz)320g (11.3oz)
BDA4-3403.4-340 Nm17-340 Nm1/2"210g (7.4oz)320g (11.3oz)

5. Setup Instructions

5.1. Battery Installation

  1. Locate the battery cap on the back of the device (refer to Figure 3).
  2. Open the battery cap.
  3. Insert two AAA 1.5V non-rechargeable batteries, ensuring correct polarity (+/-).
  4. Close the battery cap securely.

5.2. Attaching to a Ratchet Wrench

The Digital Torque Wrench Adapter is designed to be used with a standard ratchet wrench. Simply attach the adapter to the drive of your ratchet wrench, ensuring a secure fit. The adapter will then provide digital torque readings for the force applied through the ratchet.

6. Operating Instructions

6.1. Power On/Off

  • Press the Power On/Off button to turn the device on.
  • Press and hold the Power On/Off button to turn the device off.
  • The device will automatically shut off after 70 seconds of inactivity to conserve battery life.

6.2. Selecting Units

Press the M (Memory/Mode) button to cycle through the available torque units: Nm, Kg.c-m, Kg.m, lb.in, lb.ft. Select the desired unit for your measurement.

6.3. Selecting Measurement Mode (Peak/Trace)

Press the P/T (Peak/Trace) button to switch between:

  • Peak Hold Mode (P): Displays the maximum torque value applied during the measurement. This value remains on the screen until reset or a higher torque is applied.
  • Trace Mode (T): Displays the real-time torque value as it is being applied.

6.4. Setting Alarm Range

The device features an alarm function to indicate when the target torque is reached. Use the (+) Increase and (-) Decrease buttons to set your desired alarm threshold within the specified alarm range for your model (refer to Section 4, Specifications).

6.5. Taking a Measurement

  1. Attach the Digital Torque Wrench Adapter to your ratchet wrench.
  2. Select the desired unit and measurement mode (Peak or Trace).
  3. Apply torque to the fastener using the ratchet wrench.
  4. Observe the torque reading on the LCD screen. If an alarm threshold is set, the device will alert you when the target torque is reached.

7. Maintenance

7.1. Cleaning

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the display or casing.

7.2. Storage

When not in use, store the Digital Torque Wrench Adapter in its protective case to prevent damage from impacts or dust.

Digital Torque Wrench Adapter in its protective case, open
Figure 5: Adapter in open protective case
Digital Torque Wrench Adapter in its protective case, closed
Figure 6: Adapter in closed protective case

Remove batteries if the device will not be used for an extended period to prevent leakage and damage.

8. Troubleshooting

ProblemPossible CauseSolution
Device does not power onLow or dead batteries; Incorrect battery installationReplace batteries with new ones, ensuring correct polarity.
Inaccurate readingsDevice not properly calibrated (unlikely for new device); Exceeding accuracy guarantee rangeEnsure torque applied is within the 20-100% accuracy guarantee range. If issues persist, contact support.
Display is dim or flickeringLow battery powerReplace batteries.

9. User Tips

No specific user tips from reviews or Q&A are available at this time. However, general best practices for using digital torque adapters include:

  • Always ensure the adapter is securely seated on your ratchet wrench before applying torque.
  • For critical applications, perform a test measurement on a non-critical fastener to confirm operation.
  • Avoid dropping the device or subjecting it to excessive force, as this can affect its accuracy and lifespan.

10. Warranty and Support

This product comes with a 12-month warranty from the date of arrival. This warranty covers manufacturing defects and material faults under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

For technical support, warranty claims, or any questions regarding your Digital Torque Wrench Adapter, please contact the seller or manufacturer through your purchase platform.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.