SMAILWOLF M6 Bluetooth Wireless Three-Mode Gaming Mouse User Manual

Introduction

Thank you for choosing the SMAILWOLF M6 Three-Mode Gaming Mouse. This manual provides detailed instructions for setting up, operating, and maintaining your new mouse to ensure optimal performance and an enhanced gaming experience. The SMAILWOLF M6 features a high-performance PAW3311 sensor, three versatile connection modes (Bluetooth, 2.4G Wireless, and Wired), and convenient magnetic charging.

For a visual overview of the product and its features, please watch the following video:

A detailed user manual in PDF format is also available for download: SMAILWOLF M6 User Manual (PDF)

Product Overview

The SMAILWOLF M6 is a lightweight (approx. 57g) gaming mouse designed for precision and comfort. It features an integrated digital display for real-time information and an ergonomic design for right-handed users.

Image: SMAILWOLF M6 Product Parameter Diagram, showing button layout, dimensions, and ports.

Key Components:

1. Left Button
2. Right Button
3. Middle Button
4. Backward Button
5. Forward Button
6. DPI Cycle Button
7. 2.4G/OFF/BT Mode Switch
8. Code Pair Key
9. Type-C Port
10. Receiver Storage Slot
11. Digital Screen

Image: Integrated Digital Display showing 1000Hz, 2000 DPI, BT1, and battery level.

Setup and Connection

Charging the Mouse

The SMAILWOLF M6 mouse is equipped with a 500mAh rechargeable lithium battery. It supports magnetic attraction charging via its dedicated charging stand or direct charging via the Type-C port.

Image: SMAILWOLF M6 mouse magnetically attached to its charging stand.

• Magnetic Charging: Place the mouse onto the magnetic charging stand. The stand features RGB lighting and a Type-C port for power input.
• Direct Charging: Connect the provided Type-C cable to the mouse's Type-C port and a power source.
• Charging Status: The digital screen on the mouse will dynamically display the battery level during charging. Once fully charged, the battery level pattern will display statically.
• Low Battery Indication: When the battery is low, the battery pattern on the digital screen will flash.

Connection Methods

The M6 mouse supports three connection modes: 2.4G Wireless, Bluetooth, and Wired.

Image: Bottom view of the SMAILWOLF M6 mouse, highlighting the 2.4G/OFF/BT mode switch, Type-C port, and receiver storage slot.

1. 2.4G Wireless Mode

1. Set the 2.4G/OFF/BT switch on the bottom of the mouse to the 2.4G position. The digital screen will show "2.4" flashing.
2. Remove the 2.4G USB receiver from its storage slot on the mouse and plug it into an available USB port on your computer.
3. If the mouse does not respond, you may need to pair it. Press and hold the Code Pair Key (8) for 3 seconds until "2.4" on the digital screen flashes rapidly. Then, insert the receiver. Once successfully connected, "2.4" will display constantly on the screen.

2. Bluetooth Mode

1. Set the 2.4G/OFF/BT switch on the bottom of the mouse to the BT position. The digital screen will show "BT1" flashing.
2. To switch between Bluetooth channels (BT1/BT2), short press the Code Pair Key (8).
3. To enter pairing mode, long press the Code Pair Key (8) for 3 seconds. The digital screen will show "BT1" or "BT2" flashing rapidly.
4. On your device (PC, Android, Linux, Mac), search for Bluetooth devices and select "MOUSE M6" to connect.
5. Once successfully connected, "BT1" or "BT2" will display constantly on the digital screen.

3. Wired Mode

1. Connect the provided Type-C cable to the mouse's Type-C port (9) and the other end to your computer's USB port.
2. The mouse will automatically switch to wired mode. You can now use the mouse normally.

Operation

DPI Adjustment

The mouse supports adjustable DPI settings. The default DPI is 1200. You can cycle through preset DPI levels (800-1200-2000-5000-8000-12000) by pressing the DPI Cycle Button (6). The DPI value will be shown on the digital display.

For advanced customization, the DPI can be adjusted via the mouse driver software, with a maximum value of 26000 DPI.

Return Rate Adjustment

The return rate (polling rate) can be adjusted by simultaneously pressing the Middle Button (3) and the Forward Button (5). The available return rates are 125Hz, 250Hz, 500Hz, and 1000Hz for wired and 2.4G modes, and 133Hz for Bluetooth mode. The current return rate will be displayed on the digital screen.

Sleep and Wake-up Instructions

• 2.4G Mode: The mouse enters a mild sleep mode after 1 minute of inactivity. Moving any button will wake it up. After 20 minutes of inactivity, it enters deep sleep mode, which can be awakened by pressing any button.
• Wired Mode: The mouse does not enter sleep mode.
• Bluetooth Mode: The mouse enters a mild sleep mode after 1 minute of inactivity. Moving any button will wake it up. After 15 minutes of inactivity, it enters deep sleep mode, which can be awakened by pressing any button.

Software Customization

The SMAILWOLF M6 mouse supports software customization for personalized play. This includes remapping buttons, creating macros, and fine-tuning settings for a professional athletic drive.

Image: Screenshot of the SMAILWOLF M6 mouse customization software interface.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the mouse. Avoid using harsh chemicals or abrasive materials.
• Storage: Store the mouse in a dry place away from extreme temperatures and direct sunlight.
• Battery Care: To prolong battery life, avoid fully discharging the mouse frequently. Charge it when the low battery indicator appears.
• Receiver: When not in use, store the 2.4G USB receiver in its designated slot on the mouse to prevent loss.

Troubleshooting

• Mouse not responding in 2.4G mode: Ensure the mode switch is set to 2.4G. Try re-pairing the receiver by holding the Code Pair Key for 3 seconds until "2.4" flashes rapidly, then insert the receiver.
• Bluetooth connection issues: Ensure the mode switch is set to BT and the correct channel (BT1/BT2) is selected. Long press the Code Pair Key for 3 seconds to enter pairing mode and re-pair with your device.
• Mouse not working in wired mode: Verify that the Type-C cable is securely connected to both the mouse and the computer.
• Digital display not working: Check the battery level. If the battery is low, charge the mouse.

Specifications

Image: SMAILWOLF M6 Product Specifications Table.

User Tips

• Charging Stand: The SMAILWOLF M6 mouse comes with a magnetic charging stand, offering a convenient and stylish way to keep your mouse charged and ready for use.
• Lightweight Design: At approximately 57g, the M6 is designed for extended gaming sessions without fatigue, making it an excellent choice for competitive play.
• Digital Display: Utilize the integrated digital display to quickly check your current DPI, connection mode (BT1/BT2/2.4), return rate, and battery status without needing to open software.
• Ergonomics: The mouse features an ergonomic asymmetrical shape, optimized for right-handed users and various grip styles, ensuring comfortable control and dexterity.
• Switch Feel: The HUANO switches are optimized for a soft and elastic feel, providing a satisfying click experience for up to 50 million clicks.

Warranty and Support

For detailed warranty information and customer support, please refer to the official SMAILWOLF documentation or contact your retailer. Keep your proof of purchase for any warranty claims.

For further assistance or technical inquiries, please consult the comprehensive user manual available in PDF format: SMAILWOLF M6 User Manual (PDF)