LHY Audio LT3042

Contents

LHY Audio LT3042 Low Noise High Precision Linear Regulator 5V 2A DC Power Supply

Model: LT3042 | Brand: LHY Audio

1. Introduction

1.1 Safety Precautions

Please read and understand the following safety precautions before operating the device to ensure safe and optimal performance.

  • Charger Compatibility: Only use the standard DC9V 2A charger provided with this unit. Using an incompatible charger may damage the device or pose a safety risk.
  • Power Off When Not in Use: Always turn off both the input and output switches when the device is not in use or left unattended.
  • Supervision: It is recommended not to leave the power supply unattended while it is operating.

1.2 Product Overview

The LHY Audio LT3042 is a high-end linear voltage regulator designed to provide a nearly zero-noise DC power supply. It utilizes the Lingte LT high-end linear voltage regulator chip LT3042 with PNP expansion, offering exceptional precision and stability.

This power supply is ideal for sensitive applications such as high-precision measurement instruments, noise-sensitive RF applications, DAC audio decoders, USB interfaces, and digital turntables. With a noise voltage as low as 1uV, it significantly outperforms conventional voltage regulators like LM317 and LM78XX.

By utilizing pure battery power, the LT3042 effectively reduces interference, providing a clean and stable power source that enhances the dynamic range, stabilizes the music scene, and reveals richer audio details, resulting in a more realistic and vivid overall atmosphere.

LHY Audio LT3042 power supply held in hand, showing its compact size, 0.72kg weight, and 7-hour endurance.
Figure 1: LHY Audio LT3042 Power Supply (Weight: 0.72kg, Endurance: 7 hours)

2. Setup

2.1 Package Contents

Before proceeding with the setup, please verify that all items are present in the package:

  • LHY Audio LT3042 Power Supply Unit
  • 5.5x2.1 DC cable x1 (0.8m)
  • Charging adapter x1 (DC9V 2A)
LHY Audio LT3042 power supply unit, a DC cable, and a charging adapter laid out on a white surface.
Figure 2: Package Contents

2.2 Initial Charging

It is recommended to fully charge the device before its first use. Connect the provided charging adapter to the DC IN port on the rear panel and plug it into a power outlet. Ensure the "DC Input" switch on the front panel is set to "ON" and the "DC Output" switch is set to "OFF" for charging only. The Battery Status indicators will show the charging progress.

3. Operating Instructions

3.1 Front and Rear Panel Overview

Detailed view of the LHY Audio LT3042 front and rear panels with labels for DC Input, Charging, Battery Status, DC Output, ON/OFF switches, DC-OUT, USB 5V, V.Adj (Voltage adjustment ±5%), and DC IN 9-12V.
Figure 3: Front and Rear Panel Display
  • DC Input Switch: Controls power input for charging.
  • Charging Indicator: Shows charging status.
  • Battery Status Indicators: Four LEDs (25%, 50%, 75%, 100%) display the current battery charge level.
  • DC Output Switch: Controls power output to connected devices.
  • Output Indication: Shows if power is being output.
  • DC-OUT Port: DC power output (5.5mm / 2.1mm, internal positive, external negative).
  • USB 5V Port: USB power output.
  • V.Adj (Voltage Adjustment): Allows for ±5% voltage adjustment.
  • DC IN 9-12V Port: Power input for charging the unit.

3.2 Operating Modes

The LHY Audio LT3042 offers four operating modes controlled by the "DC Input" (Charge) and "DC Output" (Output) switches:

Table illustrating the four operating modes of the LHY Audio LT3042 based on the positions of the Charge switch and Output switch.
Figure 4: Operating Modes
ModeInput SwitchOutput SwitchStatus
1OFFOFFSwitching off
2ONOFFCharging
3ONONCharge and output at the same time
4OFFONPure battery output

3.3 Connecting Devices and Noise Isolation

Connect your audio equipment or other compatible devices to the DC-OUT or USB 5V ports. The power supply output voltage is 5V with a current of 2A (shared between DC and USB output ports).

The LT3042 is designed for superior noise isolation. When powering a USB device, it can supply a separate power reference to the USB interface, isolating it from noise and interference that might originate from the computer's power supply. This is achieved by using a dedicated USB A (power supply) cable alongside a standard USB 2.0 (signal) cable.

Diagram showing the LHY Audio LT3042 connected to a laptop and an audio device, illustrating how a separate USB A cable provides power to the USB interface, isolating it from the computer's power supply noise.
Figure 5: Noise Isolation for USB Interface
LHY Audio LT3042 connected to a laptop, emphasizing its USB+DC battery storage and the LT3042 voltage regulator chip for low noise.
Figure 6: USB+DC Battery Storage Ultra-Low Noise Regulated Power Supply

4. Maintenance

4.1 Cleaning

To maintain the device's performance and appearance, wipe the exterior with a soft, dry cloth. Avoid using abrasive cleaners or solvents.

4.2 Battery Care

The internal battery provides approximately 7 hours of continuous output (at 1.25A load) on a full charge. A full charge typically takes 6 hours. To prolong battery life, avoid deep discharges and store the unit with a partial charge if not used for extended periods.

Graphs showing LT3042 Power Supply Ripple Rejection and Integrated RMS Output Noise, with text indicating 7 hours continuous output (1.25A load) and 6 hours full charge time.
Figure 7: LT3042 Performance Data and Battery Information

5. Troubleshooting

If you encounter issues with your LHY Audio LT3042, please refer to the following common troubleshooting steps:

  • No Power Output:
    • Ensure the "DC Output" switch is in the "ON" position.
    • Check the battery status indicators. If the battery is low, connect the charger and set the "DC Input" switch to "ON" (Mode 2 or 3).
    • Verify that the connected device is properly plugged into the DC-OUT or USB 5V port.
  • Device Not Charging:
    • Ensure the charging adapter is securely connected to the "DC IN 9-12V" port and a working power outlet.
    • Verify the "DC Input" switch is in the "ON" position.
    • Check the Charging indicator and Battery Status LEDs for activity.
  • Unexpected Noise/Interference:
    • Ensure you are using the pure battery output mode (Input Switch OFF, Output Switch ON) for the lowest noise performance.
    • If using USB, ensure the separate power supply method (as described in Section 3.3) is correctly implemented.
    • Check all cable connections for looseness or damage.

If the problem persists, please refer to the official user manual PDF or contact customer support.

6. Specifications

FeatureDetail
Input VoltageDC 9V (via provided charging adapter)
Output VoltageDC 5V
Output Current2A (shared between DC and USB ports)
Output TerminalsUSB, DC 5.5mm / 2.1mm (internal positive, external negative)
Voltage Adjustment±5% (via V.Adj control)
Noise VoltageAs low as 1uV
Battery EnduranceApprox. 7 hours (at 1.25A load)
Full Charge TimeApprox. 6 hours
Dimensions (L x W x H)155mm x 100mm x 47mm (including foot pad)
Weight0.72 kg
Included Accessories5.5x2.1 DC cable x1 (0.8m), Charging adapter x1
Diagram showing the dimensions of the LHY Audio LT3042 power supply: 155mm length, 100mm width, and 47mm height including the foot pad.
Figure 8: Product Dimensions

7. User Tips

  • First Use: For optimal performance, fully charge the unit before its initial use.
  • Charger Compatibility: Always verify that the provided charging adapter's plug type is compatible with your region's electrical outlets. If not, a suitable adapter may be required.
  • Audio Enhancement: Experiment with connecting the power supply to various audio components (DACs, digital turntables, USB interfaces) to experience the benefits of ultra-low noise power.

8. Warranty and Support

For detailed warranty information and technical support, please refer to the official product documentation or contact the manufacturer/seller directly. A comprehensive user manual in PDF format is available for download: LHY Audio LT3042 User Manual (PDF).

When contacting support, please have your product model (LT3042) and purchase details ready.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.