1. Introduction
The Orvibo MixSwitch is a revolutionary smart wall switch designed to enhance your smart home experience. Featuring MixCtrl™ interactive control technology and Zigbee 3.0 protocol, it offers flexible control over various smart devices and supports scene-based automation. Available in multiple configurations (1-gang, 2-gang, 3-gang, and remote control versions) and colors, the MixSwitch combines aesthetic design with advanced functionality.


2. Product Variants and Design
The Orvibo MixSwitch is offered in several configurations to suit different needs:
- 1-Gang, 2-Gang, 3-Gang Switches: These are wired wall switches for controlling lighting or other connected devices.
- Remote Control Switch (Battery Type): A moveable, wireless switch with custom buttons for flexible placement and scene control.
All variants are available in White, Grey, and Golden colors, allowing for seamless integration with various home aesthetics. The modular design allows for combining multiple styles.


3. Installation and Setup
Proper installation is crucial for the safe and effective operation of your MixSwitch. It is recommended that installation be performed by a qualified electrician if you are unsure about electrical wiring.
3.1 Wired Switches (1-Gang, 2-Gang, 3-Gang)
- Power Off: Before any wiring, ensure the main power supply to the switch location is turned off at the circuit breaker.
- Wiring: Connect the Live and Neutral wires from your electrical system to the corresponding terminals on the MixSwitch. These switches require a 220V~ 50/60Hz AC power source. Refer to the internal component diagram for precise terminal identification.
- Mounting: Secure the MixSwitch into the wall box.
- Frame Installation: If using, install the 0.1mm frame accessory around the switch for a precise and aesthetic finish.
- Power On: Restore power at the circuit breaker.
3.2 Remote Control Switch (Battery Type)
- Battery Installation: Insert a CR2032 battery into the remote control switch.
- Placement: This switch is designed for flexible, wireless placement. Choose a convenient location such as a bedside table or coffee table. No wiring is required for this variant.
3.3 Zigbee Pairing
All MixSwitch devices utilize the Zigbee 3.0 protocol for smart home integration. To pair your switch with your Orvibo app or compatible Zigbee hub:
- Ensure your Zigbee hub is powered on and in pairing mode.
- Follow the specific pairing instructions within the Orvibo app to add your MixSwitch device.
- Once paired, you can configure the switch's functions and integrate it into smart scenes.


4. Operation
4.1 Basic Control
The MixSwitch offers an easy-to-operate interface for direct control of connected devices. Simply press the physical buttons to toggle lights or other appliances on/off.
4.2 Mobile App Control
For advanced control and automation, use the Orvibo mobile application:
- Download App: Download the Orvibo app from your device's app store.
- Connect: Ensure your MixSwitch is paired with your Zigbee hub and connected to the app.
- Remote Control: Control your lights and other smart devices remotely from anywhere. For example, turn on the air conditioner before you arrive home.
- Scene Management: Create and customize smart scenes to automate multiple actions with a single tap or voice command.
4.3 MixCtrl™ Technology and Scene Customization
ORVIBO's original MixCtrl™ interactive control technology allows you to freely define key functions and combine them according to your usage habits. This enables control of multiple smart devices simultaneously to achieve various smart scenes.
- Define buttons to control specific devices (e.g., TV, air conditioning, bedside lamp, curtains).
- Set up scenes like