1. Introduction
This manual provides essential information for the safe and efficient operation, setup, and maintenance of your YunFU 2-Head Commercial Embroidery Machine. Please read this manual thoroughly before operating the machine to ensure optimal performance and longevity.
The YunFU 2-Head Commercial Embroidery Machine, designed for high efficiency and versatile embroidery tasks.
Key Features:
- Two embroidery heads for increased production efficiency.
- Multi-functionality for cap, flat, T-shirt, and garment embroidery.
- Simple operation with a full touch screen interface.
- Low noise operation.
- Designed for long service life.
- Supports custom multi-color embroidery (12/15 colors).
- Detachable embroidery frame for versatile applications.
2. Standard Accessories
The following standard accessories are included with your YunFU Embroidery Machine:
Overview of standard accessories, including hoops, cap attachments, and tools.
- Cap Embroidery Attachments:
- 1 Cap station
- 2 Cap drivers
- 4 Cap hoops
- Shirt Hoops:
- 4 x 9 cm (3.5") Shirt Hoops
- 4 x 12 cm (4.7") Shirt Hoops
- 4 x 15 cm (5.9") Shirt Hoops
- 4 x 19 cm (7.8") Shirt Hoops
- Square Hoops:
- 4 x 30 x 30 cm (12" x 12") Square Hoops
- 2 x 40 x 40 cm (16" x 16") Square Hoops (for 1202CH model only)
- Frames:
- 1 Large Aluminum Frame (105x45cm for 1202CH, 37x77cm for 1202CS)
- 1 Front Table
- Tools & Maintenance:
- 1 Bobbin Winder
- 1 Tool Box with Tool Kit
- 1 Set of Consumable Spare Parts
- 1 Instruction Manual
3. Setup and Assembly
Before operating your embroidery machine, ensure it is properly assembled and set up. Refer to the included manual for detailed assembly instructions.
3.1 Initial Placement
Place the machine on a stable, level surface capable of supporting its weight (340 KG for 1202CH, 280 KG for 1202CS). Ensure adequate space around the machine for operation and maintenance.
3.2 Power Connection
Connect the machine to a power supply matching the specified voltage: AC 110V-230V; 50/60 HZ. The machine consumes 800W. Ensure the correct plug type for your region is used.
Detailed view of machine components, including the power input (bottom left).
3.3 Attaching Hoops and Frames
The machine supports various embroidery types: cap/hat, T-shirt/garment, and flat embroidery. Select the appropriate hoop or frame for your project.
- For Cap Embroidery: Attach the cap station, cap drivers, and cap hoops as shown in the diagrams.
- For Flat Embroidery: Use the large aluminum frame or square hoops.
- For T-shirt/Garment Embroidery: Use the shirt hoops.
Visual guide for setting up the machine for cap, T-shirt, and flat embroidery.
3.4 Threading the Machine
Follow the numbered thread path on each embroidery head. Ensure the thread passes through all tension discs and guides for proper stitch formation. The machine features facial thread adjusting knobs for fine-tuning tension.
Close-up of the threading system, showing thread spools and tensioners.
4. Operating Instructions
4.1 Control Panel Overview
The machine is equipped with a DAHAO A15 10-inch HD LCD touch screen for intuitive control.
The DAHAO A15 10-inch LCD Touch Screen, displaying real-time stitches and control options.
- Display: Shows real-time stitches, design details, estimated finish time.
- Connectivity: Supports Ethernet, USB, and Wi-Fi connections for design transfer.
- Controls: Frame moving buttons, stitches forward/backward function, auto/manual color change switch, stitching speed adjustment, start/stop button.
4.2 Loading Designs
Designs can be loaded via USB, computer connection, or Wi-Fi. The machine has a memory capacity of 100,000,000 stitches.
4.3 Preparing for Embroidery
- Select the appropriate hoop/frame and secure the fabric.
- Load the desired design onto the machine.
- Select the thread colors according to your design. The machine supports 12 or 15 needles for multi-color embroidery.
- Adjust thread tension using the facial thread adjusting knobs.
- Use the red laser positioning system to accurately align your design on the fabric.
4.4 Starting and Monitoring Embroidery
Press the start button on the touch screen to begin embroidery. Monitor the process on the screen, which displays real-time stitch progress. The machine features precise thread break detection to alert you of any issues.
Video demonstrating the YunFU 2-Head Embroidery Machine in action, performing cap embroidery and showcasing the user interface.
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your embroidery machine.
5.1 Daily Cleaning
- Clean the needle area and thread path to remove lint and thread residue.
- Wipe down the machine exterior with a soft, dry cloth.
5.2 Lubrication
Refer to the detailed instruction manual for specific lubrication points and recommended lubricants. Proper lubrication of moving parts, such as the Japan Rotary hook, is crucial.
5.3 Component Inspection
- Regularly check for wear and tear on needles, bobbin cases, and take-up lifting parts.
- Ensure the anti-winding pipe is clear and functional.
6. Troubleshooting
This section addresses common issues you might encounter during operation.
6.1 Thread Breaks
- Cause: Incorrect threading, improper tension, worn needle, poor quality thread, or lint buildup.
- Solution: Re-thread the machine carefully, adjust tension, replace the needle, use high-quality thread, and clean the thread path.
6.2 Poor Stitch Quality
- Cause: Incorrect tension, dull needle, wrong stabilizer, or design issues.
- Solution: Adjust upper and bobbin thread tension, replace the needle, use appropriate stabilizer for your fabric, and check design parameters.
6.3 Machine Not Starting
- Cause: Power supply issue, emergency stop engaged, or safety sensor triggered.
- Solution: Check power connection, ensure emergency stop button is disengaged, and verify all safety covers are closed.
7. Specifications
Comparison of the 1202CH and 1202CS models, highlighting dimensions and embroidery areas.
| Feature | Specification |
|---|---|
| Brand Name | YunFU |
| Type | Flat Embroidery Machine |
| Operation | Computerized |
| Condition | New |
| Heads | 2 |
| Needles | 12/15 |
| Max Speed | 1200 RPM |
| Computer Control System | DAHAO A15 10" LCD Touch Screen |
| Memory Capacity | 100,000,000 Stitches |
| Support Language | 13 Languages (Chinese, English, Arabic, Turkish, Spanish, Russian, Portuguese, French, Japanese, Dutch, German, Italian, Polish) |
| Voltage | AC 110V-230V; 50/60 HZ; 800W |
| Connection | USB / COMPUTER / WIFI |
| Applicable Industries | Hotels, Garment Shops, Building Material Shops, Manufacturing Plant, Retail Printing Shops |
| Embroidery Area (Model 1202CH) | 400 x 500 mm |
| Embroidery Area (Model 1202CS) | 320 x 360 mm |
| Cap Embroidery Area | 270° |
| Overall Dimensions (Model 1202CH) | 1200 x 1220 x 1650 mm |
| Overall Dimensions (Model 1202CS) | 980 x 780 x 1510 mm |
| Weight (Model 1202CH) | 340 KG |
| Weight (Model 1202CS) | 280 KG |
| Key Selling Points | High-accuracy |
| Machinery Test Report | Provided |
| Video Outgoing-Inspection | Provided |
| Head Interval | 400 mm |
8. Warranty and Support
8.1 Warranty Information
- Machine: 12 months warranty.
- Computer: 36 months warranty.
- Core Components: 2 years warranty.
- Free spare parts are provided with free shipping cost during the warranty period.
8.2 Technical Support
- Instant life-long online free technical support is available.
- One-to-one professional technical free training can be arranged.
- Sufficient spare parts are stocked for long-term use (more than 8 years).
- On-site factory training is available upon request.
9. User Tips
- Always use high-quality embroidery threads and needles appropriate for your fabric type to prevent thread breaks and ensure smooth operation.
- Regularly clean the machine, especially the bobbin area and thread paths, to avoid lint buildup which can affect stitch quality and machine performance.
- Before starting a new project, perform a test stitch on a scrap piece of the same fabric to verify tension settings and design alignment.
- Familiarize yourself with the touch screen interface and its various functions to fully utilize the machine's capabilities.
- Keep the included instruction manual and any digital resources handy for quick reference during operation and troubleshooting.
