YIERYI YY-1088

Contents

YY-1088 Digital Multi-function Soil Meter

Instruction Manual

1. Introduction

The YIERYI YY-1088 Digital Multi-function Soil Meter is a versatile tool designed for comprehensive soil analysis. It accurately measures six critical soil parameters: pH, Electrical Conductivity (EC), Humidity, Fertility, Ambient Light Level, and Temperature. This device is ideal for gardeners, farmers, and plant enthusiasts to ensure optimal growing conditions for various plants, both indoors and outdoors.

Its large LCD backlight display and 45-degree swivel design ensure easy readability of measurements.

2. Product Specifications

Measurement ItemMeasurement Range
pH0.00-14.00 pH
EC0.01-10.00 mS/cm
Humidity (Moist)0-10 stages (Dry to Too Wet)
Fertility0-99%
LightStage 3 (Insufficient), Stage 6 (Moderate), Stage 9 (Excessive)
Temperature0.1°C-80.0°C (32.0°F-176.0°F)
Power Supply4 x AAA batteries (not included)
Product Size295 x 64 mm
Probe Length200 mm
DisplayLarge LCD Backlight Display
Weight (Packaging included)326g

3. Setup

3.1. Battery Installation

  1. Locate the battery compartment on the back of the meter's display unit.
  2. Open the battery cover.
  3. Insert 4 AAA batteries, ensuring correct polarity (+/-).
  4. Close the battery cover securely.

Note: Batteries are not included with the product.

YY-1088 Soil Meter with battery compartment open showing 4 AAA batteries
Figure 1: Battery installation and product dimensions.

3.2. Calibration (pH and EC)

The meter features automatic calibration for pH and comes with buffer powders (pH 4.00, 7.00, 10.01) and a conductivity solution for EC calibration. Follow the instructions provided with the calibration solutions for accurate calibration. Regular calibration ensures the accuracy of your measurements.

Important Tip: The product contains 3 packs of calibration powder and a bottle of conductivity solution. Powder and liquid are sensitive products and cannot be transported through many channels. Please consult the seller before placing an order. Direct orders do not contain 3 packs of calibration powder and a bottle of conductivity solution by default.

pH buffer powders and conductivity solution for calibration
Figure 2: Calibration solutions for pH and EC.

4. Operating Instructions

4.1. General Use

  1. Insert the metal probe into the soil to be tested. Ensure the probe is fully inserted and in good contact with the soil.
  2. Press the power button to turn on the device.
  3. The LCD display will show the measurements for pH, EC, humidity, fertility, light, and temperature simultaneously.
  4. The display unit can be rotated 45 degrees for convenient reading from different angles.
Soil meter display rotated 45 degrees for easy viewing
Figure 3: The meter's display can be rotated 45 degrees for optimal viewing.

4.2. Data Lock Function

Short press the HOLD/TEMP button to lock the current data on the display. Press it again to cancel the data lock.

Video 1: Demonstration of data lock and 45-degree rotation features.

4.3. Interpreting Measurements

4.3.1. Soil pH

Soil pH is crucial for nutrient availability. The meter displays pH values from 0.00 to 14.00. Refer to plant-specific pH requirements for optimal growth.

Soil pH scale from 1 (Acidity) to 14 (Alkaline) with neutral at 7
Figure 4: Understanding the soil pH scale.

4.3.2. Soil EC (Electrical Conductivity)

EC measures the total soluble salts in the soil, indicating nutrient concentration. The range is 0.01-10.00 mS/cm. Different plants have different EC tolerances. High EC can indicate excessive fertilizer, while low EC might suggest nutrient deficiency.

Soil EC measurement showing poor EC control leading to poor growth and good EC control doubling growth
Figure 5: Soil EC measurement and its impact on plant growth.

4.3.3. Soil Humidity (Moisture)

The meter indicates soil moisture levels in stages from 0 to 10. This helps determine when watering is needed.

  • 2-3 drops: Dry
  • 4-5 drops: Medium
  • 6-7 drops: Wet
  • 8-10 drops: Too Wet
Soil moisture levels indicated by drops: Dry, Medium, Wet, Too Wet
Figure 6: Soil moisture interpretation and watering guide.

4.3.4. Soil Fertility

Soil fertility is a measure of the soil's ability to provide essential nutrients (N, P, K) for crop growth. The range is 0-99%.

Soil fertility range 0-99% with illustrations for poor and good fertility control
Figure 7: Soil fertility measurement and control.

4.3.5. Ambient Light Level

The meter detects ambient light levels, crucial for photosynthesis. It indicates light in stages:

  • 3 cells: Insufficient light, potentially causing poor growth and hindering flowering.
  • 6 cells: Moderate light, suitable for most crops.
  • 9 cells: Too much light, which can produce excessive reactive oxygen species and free radicals leading to oxidative damage.
Ambient light level interpretation: 3 cells (insufficient), 6 cells (moderate), 9 cells (too much)
Figure 8: Ambient light level interpretation.

4.3.6. Temperature

The meter measures soil temperature in Celsius and Fahrenheit, ranging from 0.1°C-80.0°C (32.0°F-176.0°F).

5. Maintenance

5.1. Cleaning the Probe

After each use, gently wipe the metal probe with a clean, damp cloth to remove any soil residue. Do not use abrasive materials or harsh chemicals, as this may damage the probe and affect accuracy.

5.2. Battery Replacement

When the battery indicator on the display shows low power, replace all 4 AAA batteries to ensure continuous and accurate operation.

5.3. Storage

Store the meter in a cool, dry place away from direct sunlight and extreme temperatures. Keep the probe clean and protected when not in use.

6. Troubleshooting

6.1. Inaccurate Readings

  • Ensure the probe is clean and free of debris.
  • Verify that the probe is fully inserted into the soil and has good contact.
  • Check battery levels and replace if necessary.
  • Perform pH and EC calibration as described in Section 3.2.

6.2. Display Not Working

  • Check if the batteries are correctly installed and have sufficient charge.
  • Press the power button firmly.

7. User Tips

  • For best results, take multiple readings in different spots around your plant to get an average measurement.
  • Always clean the probe thoroughly after each use to maintain accuracy and prolong the life of the device.
  • When testing dry soil, moisten it slightly with distilled water and wait 20-30 minutes before testing to ensure accurate moisture and nutrient readings.
  • Avoid forcing the probe into hard soil, as this can damage the tip. Gently loosen the soil first if it's too compact.

8. Warranty and Support

For warranty information, technical support, or any questions regarding your YY-1088 Digital Multi-function Soil Meter, please contact the manufacturer or your point of purchase. Keep your purchase receipt as proof of purchase.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.