1. Introduction
This manual provides instructions for the USB Type-C Programming Cable, designed to connect your compatible two-way radio to a computer. This connection facilitates the programming of radio settings and frequencies using dedicated software.
2. Package Contents
Please check the package for the following item:
- 1 x USB Type-C Programming Cable
3. Specifications
| Feature | Description |
|---|---|
| Item Type | Programming Cable |
| Brand Name | Iradio |
| Connector A (to Walkie Talkie) | Type-C |
| Connector B (to PC/Mobile) | USB (Type-A) |
| Adapted System | Windows XP, Windows 7, Windows 8, Windows 10, Windows 11 |
| Cable Length | Up to 100 cm (39.37 inches) |
| Compatible Models | Iradio UV-98 PLUS, UV-99, R5000, R6000; Bajeton DM-5000, DM-6000; Radtel RT-880, RT-880G, RT-6D |
| Battery Included | No |
| Certification | None |
4. Setup Instructions
Follow these steps to set up your programming cable:
- Install Drivers: Before connecting the cable, ensure that the necessary USB drivers are installed on your computer. If the cable is not recognized automatically upon connection, you may need to manually install drivers. Please contact the seller if you require assistance locating the correct drivers.
- Connect the Cable:
- Connect the Type-C end of the programming cable to the appropriate port on your walkie-talkie.
- Connect the USB Type-A end of the programming cable to an available USB port on your computer.
- Verify Connection: Once connected, check your computer's Device Manager (for Windows) to confirm that the cable is recognized and assigned a COM port. Note the assigned COM port number, as this will be needed for the programming software.
- Obtain Programming Software: You will need specific frequency writing software compatible with your walkie-talkie model. If you do not have this software, please contact the seller for assistance.
5. Operating Instructions
Once the cable is connected and drivers are installed, you can proceed with programming your radio:
- Launch the frequency writing software for your specific walkie-talkie model on your computer.
- Within the software, select the correct COM port that was assigned to the programming cable (as identified in Device Manager).
- Follow the software's instructions to read the current settings from your radio, modify frequencies and other parameters, and then write the new settings back to the radio.
- Ensure the radio remains powered on and connected throughout the programming process.
6. Maintenance
To ensure the longevity and proper function of your programming cable:
- Store the cable in a clean, dry environment away from extreme temperatures.
- Avoid bending or kinking the cable sharply, as this can damage internal wires.
- Do not expose the connectors to moisture or corrosive substances.
- Clean the connectors gently with a dry, lint-free cloth if necessary.
7. Troubleshooting
7.1 Cable Not Recognized by Computer
- Install Drivers: Ensure that the correct USB drivers for the programming cable are installed. If not, install them and restart your computer.
- Check COM Port: Verify in your computer's Device Manager that the cable is listed under 'Ports (COM & LPT)' and note its assigned COM port number.
- Try Different USB Port: Connect the cable to a different USB port on your computer.
- Restart Computer: A simple restart can often resolve connectivity issues.
7.2 Programming Software Cannot Detect Radio
- Correct COM Port: Make sure you have selected the correct COM port in your programming software that matches the one assigned to the cable in Device Manager.
- Radio Power: Ensure your walkie-talkie is powered on and fully charged.
- Cable Connection: Double-check that both ends of the cable are securely connected to the radio and the computer.
- Software Compatibility: Confirm that you are using the correct programming software version for your specific radio model.
8. User Tips
- Software Specificity: Many walkie-talkie models require their own proprietary programming software. Generic software like CHIRP may work for some models but not all. Always confirm compatibility.
- Driver Installation: If the cable is not immediately recognized, the most common issue is missing or incorrect drivers. Always prioritize driver installation if you encounter connectivity problems.
- Backup Settings: Before making any changes, always read and save your radio's current settings to a file on your computer. This allows you to restore your radio to its previous state if any issues arise during programming.
9. Warranty and Support
For any product-related inquiries, technical support, or warranty information, please contact the seller directly. Keep your purchase records handy when contacting support.