1. Introduction
This manual provides detailed instructions for setting up, operating, and maintaining your KCEVE KVM Switch. This device allows you to control multiple computers (3 or 4, depending on the model) from a single set of keyboard, mouse, and three monitors, supporting high resolutions up to 8K@60Hz/4K@144Hz via HDMI and DisplayPort connections.
Two models are available:
- 4 IN 3 OUT Model: Connects up to 4 computers to 3 monitors.
- 3 IN 3 OUT Model: Connects up to 3 computers to 3 monitors.
Please identify your model before proceeding with the instructions.
2. Package Contents
Verify that all items are present in your package:
- 1x KVM Switch (4 IN 3 OUT or 3 IN 3 OUT model)
- USB 3.0 Cables (4x for 4 IN 3 OUT model, 3x for 3 IN 3 OUT model)
- 1x 12V Power Adapter
- 1x Wired Remote Control
- 1x User's Manual
3. Specifications
| Feature | Description |
|---|---|
| Model Options | 4 IN 3 OUT (4 Computers, 3 Monitors), 3 IN 3 OUT (3 Computers, 3 Monitors) |
| Video Inputs | HDMI, DisplayPort (DP) |
| Video Outputs | 3x HDMI/DP (for monitors) |
| DP Port Resolution | Up to 8K@30Hz, 4K@144Hz |
| HDMI Port Resolution | Up to 8K@60Hz, 4K@120Hz |
| USB Ports | 4x USB 3.0 (5Gbps data transfer) |
| Power Supply | DC 12V |
| Switching Methods | Physical button on panel, Wired Remote Control |
| Display Modes | Extended Mode, Mirror Mode (Copy Mode) |
| Operating System Compatibility | Windows, Mac OS, Chrome OS, Linux, Vista (Driver-free) |
| Certifications | CE, FCC, RoHS |
4. Setup Instructions
Follow these steps to connect your KVM Switch:
- Power Off Devices: Ensure all computers and monitors are powered off before making any connections.
- Connect Monitors to KVM: Connect your three monitors to the "OUT A HD PORT", "OUT B DP PORT", and "OUT C DP PORT" on the KVM switch. Use appropriate HDMI and DisplayPort cables.
- Connect Computers to KVM (Video):
- For each PC, connect its HDMI output to an "INPUT Bx HD" port on the KVM.
- For each PC, connect its two DisplayPort outputs to the corresponding "INPUT Bx DP" ports on the KVM.
- Important Note: Each PC requires 1*HDMI + 2*DP ports for triple monitor output. Adapters may be needed if your PC lacks these specific ports (e.g., DP to HDMI, USB-C to DP/HDMI).
- Use high-quality 8K DP1.4 and HDMI 2.1 cables to achieve 8K resolutions and ensure stable signals. Keep cable lengths as short as possible.
- Connect Computers to KVM (USB): For each PC, connect one end of the provided USB 3.0 cable to a USB 3.0 port on your PC and the other end to the corresponding "USB 3.0 INPUT Ax" port on the KVM switch.
- Connect USB Peripherals: Connect your keyboard, mouse, printer, U disk, or other USB 3.0 devices to the "USB 3.0" ports on the front panel of the KVM switch.
- Connect Wired Remote: Plug the wired remote control into the dedicated "Wired Remote" port on the KVM switch.
- Connect Power Adapter: Connect the 12V Power Adapter to the "DC/12V" port on the KVM switch and plug it into a power outlet.
- Power On: Power on the KVM switch using the ON/OFF switch, then power on your monitors and computers.
5. Operating Instructions
5.1 Switching Between Computers
You can switch between connected computers using two methods:
- Physical Button: Press the corresponding "PC 1", "PC 2", "PC 3", or "PC 4" button on the front panel of the KVM switch to switch to the desired computer. The LED indicator above the button will light up to show the active computer.
- Wired Remote Control: Use the wired remote control to switch between computers. This allows you to keep the KVM switch out of sight for a tidier desk.
5.2 Setting Display Modes (Extended/Mirror)
The KVM switch supports both Extended and Mirror (Copy) display modes for your monitors. The method to configure these modes depends on your operating system:
- Windows OS:
Press the shortcut key "WIN + P" on your keyboard. A small window will pop up, allowing you to select either "Extend" or "Mirror" mode.
- Mac OS:
- Set Mirror Mode: Go to [Apple Icon] > [System Preferences] > [Display] > [Arrange], and then check [Mirror Display].
- Set Extended Mode: When [Mirror Display] is unchecked, "Extended Mode" will be active.
6. Maintenance
To ensure the longevity and optimal performance of your KVM Switch, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the exterior of the KVM switch. Avoid using liquid cleaners or abrasive materials.
- Ventilation: Ensure the KVM switch is placed in a well-ventilated area to prevent overheating. Do not block any ventilation openings.
- Cable Management: Keep cables organized and free from kinks or excessive bending to prevent damage and ensure stable connections.
- Power Off When Not in Use: If the KVM switch will not be used for an extended period, it is recommended to power it off and disconnect the power adapter.
7. Troubleshooting
If you encounter issues with your KVM Switch, refer to the following common problems and solutions:
7.1 No Display or Low Resolution
- Check Cables: Ensure all HDMI and DisplayPort cables are securely connected to both the KVM switch and your computers/monitors.
- Cable Quality: For 8K/4K resolutions, use certified 8K HDMI 2.1 and DP1.4 cables. Lower quality or longer cables may not support high resolutions.
- PC/Monitor Support: Verify that your computers and monitors support the desired resolution and refresh rate.
- Adapter Compatibility: If using adapters (e.g., USB-C to DP/HDMI), ensure they are high-quality and compatible with the KVM switch and your devices.
- Power Supply: Confirm the 12V power adapter is correctly connected and providing power to the KVM switch.
7.2 USB Devices Not Responding
- Power Supply: Ensure the 12V DC power adapter is connected. High-power USB devices (like hard drives) require sufficient power.
- USB Cable Connection: Check that the USB 3.0 cables connecting your computers to the KVM switch are securely plugged in.
- Device Compatibility: Ensure your USB devices are compatible with USB 3.0.
- Try Different Port: Test the USB device in a different USB port on the KVM switch or directly on the computer to isolate the issue.
7.3 Switching Issues
- Wired Remote: If using the wired remote, ensure it is properly connected to the KVM switch.
- Physical Buttons: Try using the physical buttons on the KVM panel to switch computers.
- Power Cycle: Power off the KVM switch, disconnect the power adapter, wait a few seconds, then reconnect and power on.
8. User Tips
- For optimal performance, especially with high resolutions, always use high-quality, certified HDMI 2.1 and DisplayPort 1.4 cables.
- Ensure all necessary video and USB cables are connected from each PC to the KVM switch for proper functionality. A common mistake is missing a USB cable, which prevents keyboard/mouse sharing.
- If you experience flickering or signal loss, try reducing the cable length or using active/powered cables if passive ones are too long for your setup.
- The 12V DC power supply is crucial for stable operation, especially when connecting multiple USB devices or running high-resolution displays. Do not operate the KVM without it.
- Utilize the wired remote for convenience to keep your desktop clutter-free.
9. Warranty and Support
The KCEVE KVM Switch comes with a one-year professional warranty. For any questions, technical assistance, or warranty claims, please contact your retailer or the manufacturer's support channels.