ZUIDID PS1 AC Adapter (SCPH-112A / ADP-15YB)

ZUIDID EU Plug AC Adapter Power Supply for PS1 Game Console

Model: SCPH-112A / ADP-15YB (Compatible)

Introduction

This manual provides essential information for the safe and effective use of your ZUIDID EU Plug AC Adapter, designed specifically for the PlayStation 1 (PS1) game console. Please read these instructions carefully before use to ensure proper functionality and safety.

Safety Information

  • Ensure the power outlet voltage matches the adapter's input specifications (AC 100-240V).
  • Do not expose the adapter to water or excessive moisture.
  • Avoid dropping or subjecting the adapter to strong impacts.
  • Do not attempt to open or repair the adapter. Refer servicing to qualified personnel.
  • Unplug the adapter from the wall outlet when not in use for extended periods.
  • Keep out of reach of children.

Product Overview

The ZUIDID EU Plug AC Adapter is a replacement or spare power supply unit for the original PlayStation 1 console. It converts standard AC wall power to the DC voltage required by the console.

ZUIDID EU Plug AC Adapter for PS1
Figure 1: ZUIDID EU Plug AC Adapter for PS1. Shows the adapter unit with EU plug, attached cable, and DC output connector. The label displays input/output specifications and model numbers SCPH-112A and ADP-15YB.

Components:

  • AC Adapter Unit: The main body containing the power conversion circuitry and an integrated EU type plug.
  • DC Output Cable: Permanently attached cable with a proprietary connector designed to fit the PS1 console's power input port.

Specifications

FeatureDetail
Model NumbersSCPH-112A, ADP-15YB
Input VoltageAC 100-240V ~ 0.2A
Input Frequency50/60Hz
Output VoltageDC 7.5V
Output Current2.0A
Plug TypeEU Standard
WeightApproximately 0.155 kg
Dimensions (approx.)8 cm (L) x 8 cm (W) x 8 cm (H) (Package dimensions, adapter unit is smaller)

Setup Instructions

  1. Verify Compatibility: Ensure your PlayStation 1 console requires a 7.5V DC power input and is compatible with an EU standard plug.
  2. Connect to Console: Insert the DC output connector of the adapter firmly into the power input port on the back of your PS1 console.
  3. Connect to Power Outlet: Plug the EU standard plug of the AC adapter into a suitable AC 100-240V, 50/60Hz wall outlet.
  4. Power On: Once connected, you can power on your PS1 console using its power button.

Operating Instructions

The ZUIDID EU Plug AC Adapter functions as a direct power source for your PS1 console. No special operating procedures are required beyond connecting it as described in the Setup section.

  • Always ensure the adapter is securely connected to both the console and the wall outlet during operation.
  • If the console is not in use, it is recommended to turn off the console and unplug the adapter from the wall outlet.

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the exterior of the adapter. Do not use liquid cleaners or solvents.
  • Storage: Store the adapter in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
  • Cable Care: Avoid bending or twisting the cable excessively, especially near the connectors, to prevent damage.

Troubleshooting

ProblemPossible CauseSolution
Console does not power on.Adapter not properly connected.
No power from wall outlet.
Faulty adapter or console.
Ensure all connections are secure.
Test the wall outlet with another device.
Try a different compatible adapter if available. If the issue persists, the console may require servicing.
Adapter feels unusually hot.Overload or internal fault.Immediately unplug the adapter from the wall and console. Do not use it again. Contact support.
Loose connection at console.Worn connector or port.Ensure the connector is fully inserted. If it remains loose, the connector or console port may be damaged.

User Tips

  • Always use the correct voltage adapter for your console to prevent damage.
  • Consider using a surge protector for your power outlet to protect your console and adapter from power fluctuations.
  • If traveling, ensure you have the correct plug adapter for the region's electrical outlets, but note this adapter is specifically for EU outlets.

Warranty and Support

For warranty information or technical support, please refer to the seller's terms and conditions or contact the retailer where the product was purchased. Keep your purchase receipt as proof of purchase.

Related Documents - PS1 AC Adapter (SCPH-112A / ADP-15YB)

Preview RX6H Retro Handheld Game Console Manual & Instructions | ZUIDID RGB 20S
Comprehensive user manual for the ZUIDID RX6H retro handheld gaming console, covering functional descriptions, key combinations, special instructions, charging, and technical specifications.
Preview SF3000 Game Player User Manual - ZUIDID Handheld Console Guide
Comprehensive user manual for the ZUIDID SF3000 handheld game player. Learn about technical specifications, functions, package contents, and important safety precautions for this retro gaming device.
Preview ZUIDID K10 Wireless Keypad User Guide: Installation, Programming, and Operation
Comprehensive user guide for the ZUIDID K10 wireless keypad. Learn how to install, program passcodes and RFID tags, connect to your hub, arm/disarm your security system, and use the doorbell function.
Preview ZUIDID 48V 350W 18A Three-Mode Sine Wave Brushless Motor Controller User Manual
User manual for the ZUIDID 48V/52V/64V 350W 18A Three-mode Sine Wave Brushless Motor Controller (6 Mosfet) for E-bike, Electric Bicycle, and Scooter. Provides technical specifications and operational details.
Preview Car Speaker Mounting and System Planning Guide
Comprehensive guide on mounting car horns and planning your audio system for optimal performance, detailing speaker impedance requirements and installation best practices.
Preview LCD-S866 LCD Display User Manual for Electric Bikes and Scooters
Comprehensive user manual for the ZUIDID LCD-S866 display panel, detailing its features, specifications, settings, and button operations for electric bikes and scooters. Covers display functions, control settings, and fault codes.