1. Introduction
This manual provides instructions for setting up and operating your DNXT 4G LTE Wireless Router, available in models CP103 (2 antennas) and CP108 (4 antennas). This device is designed to provide shared internet access via 4G LTE cellular networks, converting the cellular signal into a Wi-Fi hotspot and wired Ethernet connection. It is an export version supporting English and Russian languages, primarily for the Eurasian market.
The router supports LTE Cat4 for cellular connectivity and offers Wi-Fi at 300Mbps, capable of supporting up to 32 connected users. Please note that while the product title includes '5G', this refers to 5GHz Wi-Fi band capability (though the specifications provided only confirm 2.4GHz Wi-Fi) and not 5G cellular network support. This device operates on 4G LTE cellular networks.
2. Package Contents
Please check the package for the following items:
- DNXT 4G LTE Wireless Router (CP103 or CP108 model)
- User Manual
- Ethernet Cable
- Power Adapter (European Standard for Eurasian version)

3. Product Overview
The DNXT 4G LTE Wireless Router is designed for easy plug-and-play internet sharing. It features a SIM card slot for cellular data and provides both Wi-Fi and wired LAN/WAN connectivity.
3.1. Router Models
- CP103: Features 2 external antennas.
- CP108: Features 4 external antennas for potentially enhanced signal reception.
3.2. Front Panel Indicators
The router typically includes LED indicators on the front panel to show device status:
- SYS: System status indicator.
- WiFi: Wi-Fi network activity indicator.
- 4G: 4G cellular network status indicator.


3.3. Rear Panel Ports (Typical)
The rear panel usually contains the following ports:
- SIM Card Slot: For inserting your 4G LTE SIM card.
- LAN/WAN Port(s): For connecting to wired devices or an existing modem/router.
- Power Input: For connecting the power adapter.
- Reset Button: (Usually a small pinhole button) To restore factory settings.


4. Setup Guide
Follow these steps to set up your DNXT 4G LTE Wireless Router:
4.1. Insert SIM Card
- Ensure the router is powered off.
- Locate the SIM card slot on the router.
- Carefully insert your active 4G LTE SIM card into the slot until it clicks into place. Ensure the SIM card is inserted in the correct orientation as indicated on the device.
4.2. Connect Power
- Connect the provided power adapter to the router's power input port.
- Plug the other end of the power adapter into a suitable electrical outlet.
4.3. Power On
The router will automatically power on once connected to electricity. Wait for the SYS, WiFi, and 4G indicators to stabilize. The 4G indicator should show a steady light, indicating a successful connection to the cellular network.
4.4. Initial Connection (Optional: Wired)
If you prefer a wired connection for initial setup or for a desktop computer:
- Connect one end of the Ethernet cable to a LAN/WAN port on the router.
- Connect the other end of the Ethernet cable to the Ethernet port on your computer or other network device.
5. Operating Instructions
5.1. Connecting to Wi-Fi
To connect your devices (smartphones, laptops, tablets) to the router's Wi-Fi network:
- On your device, enable Wi-Fi and search for available networks.
- Locate the Wi-Fi network name (SSID) of your router. This is usually printed on a label on the bottom or back of the router.
- Select the SSID and enter the Wi-Fi password (also found on the router's label).
- Once connected, your device should have internet access.
5.2. Accessing the Web Management Interface
For advanced settings, such as changing Wi-Fi name/password, network configuration, or checking data usage, you can access the router's web management interface:
- Ensure your device is connected to the router's Wi-Fi or via an Ethernet cable.
- Open a web browser (e.g., Chrome, Firefox, Edge).
- In the address bar, type the default IP address of the router (e.g., 192.168.1.1 or 192.168.0.1). This IP address is typically found on the router's label.
- Enter the default username and password when prompted (also usually on the router's label).
- You can now configure various settings of your router.
6. Specifications
| Feature | Description |
|---|---|
| Brand | DNXT |
| Model | CP103 / CP108 |
| Category | 4G/3G Router |
| Transmission Rate | 300Mbps (Wi-Fi) |
| Cellular Standard | FDD-LTE, TD-SCDMA, CDMA 2000 (LTE Cat4) |
| Wireless Frequency | 2.4G (802.11ac protocol) |
| Antennas | CP103: 2 Antennas; CP108: 4 Antennas |
| VPN Support | No |
| Firewall | Built-in |
| Max Users Supported | Up to 32 devices |
| Supported Languages | English, Russian |
| Power Supply | European Standard (Eurasian version) |
| European Frequency Bands | 1, 3, 5, 7, 8, 20, 38, 40 |
7. Troubleshooting
7.1. No Internet Access
- Check SIM Card: Ensure the SIM card is correctly inserted and active with a data plan.
- Check 4G Indicator: If the 4G indicator is off or blinking, the router may not be connected to the cellular network. Try repositioning the router or checking your SIM card.
- Router Reboot: Power off the router, wait 10 seconds, then power it back on.
- APN Settings: Access the web management interface and verify that the Access Point Name (APN) settings are correct for your mobile operator.
7.2. Weak Wi-Fi Signal or Slow Speed
- Router Placement: Place the router in a central location, away from obstructions (thick walls, metal objects) and interference sources (microwaves, cordless phones).
- Antenna Orientation: Adjust the external antennas for optimal signal reception.
- Device Distance: Ensure your Wi-Fi devices are within a reasonable range of the router.
- Interference: Other electronic devices operating on the 2.4GHz band can cause interference. Try changing the Wi-Fi channel in the router's settings.
7.3. Cannot Access Web Management Interface
- IP Address: Double-check the router's default IP address (usually on the label).
- Connection: Ensure your device is connected to the router's network (Wi-Fi or Ethernet).
- Browser Cache: Clear your web browser's cache and cookies, or try a different browser.
- Firewall/Antivirus: Temporarily disable any firewall or antivirus software on your computer that might be blocking access.
8. User Tips
- SIM Card Compatibility: This router is designed for 4G LTE SIM cards. Despite '5G' in the product title, this device does not support 5G cellular networks. The '5G' likely refers to 5GHz Wi-Fi, though the provided specifications only confirm 2.4GHz Wi-Fi. Always confirm your SIM card is 4G LTE compatible for this device.
- Regional Compatibility: Ensure the router's supported frequency bands (e.g., European bands: 1, 3, 5, 7, 8, 20, 38, 40) match those of your local mobile network provider for optimal performance.
- Antenna Configuration: For models with multiple antennas (CP108), experiment with different antenna orientations to find the best cellular signal reception.
9. Warranty and Support
For warranty information and technical support, please refer to the documentation provided with your purchase or contact the seller directly. Keep your proof of purchase for any warranty claims.