NOVORIK 20V Mini Circular Saw 4-1/2"

Contents

NOVORIK 20V Cordless Mini Circular Saw User Manual

Model: 20V Mini Circular Saw 4-1/2"

Brand: NOVORIK

1. Introduction

Thank you for choosing the NOVORIK 20V Cordless Mini Circular Saw. This powerful and compact tool is designed for precise cutting of various materials including wood, soft metal, plastic, and drywall. Featuring a robust motor, laser guide, and adjustable cutting capabilities, it offers versatility and ease of use for both DIY enthusiasts and professionals. Please read this manual thoroughly before operation to ensure safe and efficient use of your new tool.

NOVORIK 20V Cordless Mini Circular Saw with blade and rip guide on a wooden surface

Image: NOVORIK 20V Cordless Mini Circular Saw with included accessories.

2. Safety Instructions

WARNING: Read all safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.

General Power Tool Safety

  • Always wear eye protection (safety glasses or goggles) and hearing protection.
  • Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts.
  • Keep children and bystanders away while operating a power tool.
  • Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
  • Maintain a firm grip on the tool with both hands during operation.
  • Ensure the workpiece is securely clamped or stabilized before cutting.

Circular Saw Specific Safety

  • Keep hands away from cutting area and the blade. Keep your second hand on the auxiliary handle, or motor housing. If both hands are holding the saw, they cannot be cut by the blade.
  • Do not reach underneath the workpiece. The guard cannot protect you from the blade below the workpiece.
  • Adjust the cutting depth to the thickness of the workpiece. Less than a full tooth of the blade should be visible below the workpiece.
  • Never hold the workpiece in your hands or across your leg while cutting. Secure the workpiece to a stable platform.
  • Before starting the saw, ensure the blade is clear of the workpiece.
  • Always allow the blade to come to a complete stop before setting the saw down.
  • Use only blades recommended by the manufacturer.
  • Be aware of the laser guide. Do not stare directly into the laser beam.

3. Package Contents

Your NOVORIK 20V Cordless Mini Circular Saw package includes the following items:

  • 1 x 20V Cordless Mini Circular Saw
  • 1 x 20V Li-ion Battery Pack
  • 1 x Battery Charger
  • 1 x 4-1/2" 24T TCT Saw Blade (for wood)
  • 1 x 4-1/2" 48T TCT Saw Blade (for wood and soft metal)
  • 1 x Hex Wrench
  • 1 x Rip Guide
  • 1 x Vacuum Adapter
  • 1 x User Manual
NOVORIK 20V Cordless Mini Circular Saw with battery, charger, and two blades

Image: All components included in the package.

4. Product Overview

Familiarize yourself with the components of your mini circular saw:

Detailed diagram of the circular saw showing Spindle Lock Button, Dust Extraction Port, Ergonomic Soft Rubber Handle, Laser, Switch, Safety Button, Iron Plate, Blade Clamp.

Image: Key components of the NOVORIK Mini Circular Saw.

Labeled diagram of saw features including Flexible Cutting Depth, Laser, Angle adjustment, Blade Guard, Battery Pack, Switch, Lock-off Switch.

Image: Additional labeled features of the saw.

  • Spindle Lock Button: Locks the spindle for easy blade changes.
  • Dust Extraction Port: Connects to a vacuum for dust collection.
  • Ergonomic Soft Rubber Handle: Provides comfortable grip and reduces vibration.
  • Laser Guide: Projects a line for accurate cutting.
  • Switch: Activates the saw.
  • Safety Button/Lock-off Switch: Prevents accidental starting.
  • Iron Plate/Base Plate: Supports the saw on the workpiece.
  • Blade Clamp: Secures the saw blade.
  • Blade Guard: Retracts during cutting to expose the blade, covers it when not in use.
  • Flexible Cutting Depth Adjustment: Allows setting desired cutting depth.
  • Angle Adjustment: For bevel cuts.
  • Battery Pack: Provides power to the cordless saw.

5. Setup

5.1 Charging and Installing the Battery

  1. Connect the charger to a power outlet.
  2. Slide the battery pack onto the charger. The indicator light will show charging status.
  3. Once fully charged, remove the battery from the charger.
  4. Align the charged battery pack with the battery slot on the saw handle and slide it in until it clicks securely into place.

5.2 Installing the Saw Blade

Always ensure the battery is removed from the saw before changing blades.

Four steps for blade installation: 1. Press spindle lock button. 2. Loosen with inner hexagon wrench and remove press bolt. 3. Remove lower protective cover, put in saw blade and press plate and bolts. 4. Complete installation by turning fixed blade counterclockwise with inner hexagon wrench.

Image: Step-by-step blade installation guide.

  1. Step 1: Press and hold the spindle lock button to prevent the blade from rotating.
  2. Step 2: Use the provided hex wrench to loosen and remove the press bolt (blade screw) by turning it clockwise. Remove the outer blade clamp.
  3. Step 3: Lift the lower protective cover. Place the desired 4-1/2" saw blade onto the spindle, ensuring the teeth are pointing in the direction of rotation indicated on the saw. Reinstall the outer blade clamp and the press bolt.
  4. Step 4: While still holding the spindle lock button, tighten the press bolt counter-clockwise with the hex wrench until the blade is securely fastened. Release the spindle lock button.

5.3 Installing the Rip Guide

The rip guide helps maintain straight cuts parallel to the edge of your workpiece.

  1. Locate the slot on the front of the saw's base plate.
  2. Slide the rip guide into this slot.
  3. Adjust the rip guide to the desired cutting width and tighten its locking screw to secure it in place.

5.4 Attaching the Vacuum Adapter

For a cleaner working environment, attach the vacuum adapter to the dust extraction port and connect it to a shop vacuum.

Dust extraction port in use with a vacuum hose, showing a cleaner working environment and the safety lock for enhanced safe operation.

Image: Dust extraction in action for a cleaner workspace.

6. Operating Instructions

6.1 Powering On/Off

  1. To start the saw, press the safety button (lock-off switch) with your thumb, then squeeze the main trigger switch.
  2. To stop the saw, release the trigger switch. The blade will come to a stop.

6.2 Adjusting Cutting Depth

The saw allows for adjustable cutting depths up to 1-11/16" (43mm) at 90°.

  1. Loosen the depth adjustment lever located on the side of the saw.
  2. Raise or lower the base plate to achieve the desired cutting depth. Ensure only a small portion of the blade extends below the workpiece.
  3. Tighten the depth adjustment lever firmly.

6.3 Adjusting Bevel Angle

The saw can make bevel cuts from 0° to 45°, with a maximum depth of 1-1/8" (28mm) at 45°.

  1. Loosen the bevel adjustment lever.
  2. Tilt the base plate to the desired angle (0° to 45°).
  3. Tighten the bevel adjustment lever securely.
Cutting capacity diagram showing 43mm at 90 degrees and 28mm at 45 degrees.

Image: Cutting capacity at different angles.

Illustrations of straight cutting, bevel cutting, cutting angle adjustment from 0 to 45 degrees, and cutting depth adjustment from 0 to 1-11/16 inches.

Image: Visual guide for straight, bevel, angle, and depth adjustments.

6.4 Using the Laser Guide

The built-in laser guide projects a line onto your workpiece, assisting in maintaining a straight cut. Ensure the laser is aligned with your pencil mark before starting the cut.

6.5 Cutting Techniques and Materials

Always ensure the saw reaches full speed before engaging the blade with the workpiece. Apply steady, even pressure. Do not force the saw.

The circular saw cutting various materials including wood, PVC, tile, and cement block.

Image: Examples of materials suitable for cutting with this saw.

  • Wood: Use the 24T TCT blade for general wood cutting. For finer cuts or hardwoods, the 48T TCT blade may be suitable.
  • Soft Metal: The 48T TCT blade is designed for cutting soft metals. Ensure proper clamping and feed rate.
  • Plastic/PVC: Use the 48T TCT blade. A slower, steady feed rate is often best to prevent melting.
  • Drywall: The 24T TCT blade can be used for drywall.

7. Maintenance

Regular maintenance ensures the longevity and safe operation of your tool.

  • Cleaning: After each use, disconnect the battery and clean the saw with a soft, dry cloth. Remove any sawdust or debris from the blade guard, motor vents, and base plate. Use compressed air for hard-to-reach areas.
  • Blade Inspection: Regularly inspect saw blades for sharpness, cracks, or missing teeth. Replace dull or damaged blades immediately.
  • Battery Care: Store batteries in a cool, dry place. Do not expose them to extreme temperatures. Charge batteries fully before storage and periodically during long storage periods.
  • Lubrication: This tool is designed for maintenance-free operation. Do not lubricate internal components.
  • Storage: Store the saw and accessories in a dry, secure location, out of reach of children.

8. Troubleshooting

If you encounter issues with your saw, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Saw does not startBattery not charged or improperly installed; Safety button not pressed; Faulty switch.Ensure battery is fully charged and correctly inserted. Press safety button before trigger. If problem persists, contact support.
Blade not cutting efficientlyDull or damaged blade; Incorrect blade for material; Improper cutting depth.Replace blade. Use appropriate blade for the material. Adjust cutting depth.
Excessive vibration or noiseLoose blade; Damaged blade; Internal issue.Check blade for tightness and damage. Replace if necessary. If problem persists, discontinue use and contact support.
Laser guide not visibleDirty laser lens; Low battery.Clean laser lens. Ensure battery is charged.

For issues not listed here or if solutions do not resolve the problem, please contact customer support.

9. Specifications

FeatureSpecification
Voltage20V
Motor2 Amp
No-Load Speed3400 RPM
Blade Diameter4-1/2 inches
Max. Cutting Depth (90°)1-11/16 inches (43mm)
Max. Cutting Depth (45°)1-1/8 inches (28mm)
Bevel Capacity0° - 45°
Weight6.9 lbs
Power SourceBattery (Li-ion)
Image showing the saw with 'ROBUST POWER OUTPUT 0-3400RPM' text.

Image: Highlighting the saw's robust power output.

10. User Tips

Here are some general tips to enhance your experience with the NOVORIK Mini Circular Saw:

  • Always test cuts on scrap material before cutting your final workpiece to verify depth and angle settings.
  • Keep blades clean and sharp for optimal performance and safety.
  • When cutting longer pieces, use additional supports to prevent the material from binding the blade.
  • Utilize the dust extraction port with a shop vacuum to minimize airborne dust and keep your workspace clean.
  • For precise straight cuts, always use the rip guide or a clamped straight edge.

11. Warranty and Support

For warranty information, technical support, or replacement parts, please refer to the contact information provided at the point of purchase or visit the official NOVORIK website. Keep your purchase receipt as proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.