1. Introduction
Thank you for choosing the GGBEE TG-TY16401 Outdoor Solar Light. This versatile lighting solution is designed for various outdoor and camping applications, offering energy-efficient illumination with its split design, remote control, and advanced motion sensing capabilities. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.

Figure 1: Induction Solar Lamp with solar panel for charging.
2. Safety Information
- Do not attempt to disassemble or modify the product. Unauthorized modifications may cause damage or injury.
- Keep the product away from fire, water, and extreme temperatures.
- Ensure the solar panel is installed in a location that receives direct sunlight for optimal charging.
- Use appropriate tools and safety gear during installation.
- This product is designed for outdoor use with 'living level waterproof' rating. While resistant to splashes, avoid submerging it in water.
3. Package Contents
Please check the package for the following items:
- Solar Light Unit(s)
- Solar Panel
- 3-meter (9.8ft) Connecting Cable
- Mounting Brackets (360° Rotating Bracket)
- Mounting Screws and Wall Plugs
- Remote Control
- User Manual (this document)
Video 1: Product unboxing and demonstration.
4. Setup and Installation
The GGBEE Solar Light features a split design, allowing flexible placement of the solar panel and the light unit. The 3-meter (9.8ft) cable provides ample length for optimal solar panel exposure.

Figure 2: Split design for flexible indoor/outdoor installation.
Installation Steps:
- Choose Location: Select a location for the solar panel that receives maximum direct sunlight throughout the day. The light unit can be installed indoors or outdoors, ensuring the connecting cable reaches the solar panel.
- Mark and Drill: Use the mounting bracket as a template to mark the desired drilling points on the wall. Punch the holes in the wall with an impact drill.
- Insert Wall Plugs: Use a hammer to gently drive the provided wall plugs into the drilled holes.
- Mount Solar Panel: Securely mount the solar panel onto the wall using the provided screws. Ensure it is angled for optimal sun exposure.
- Mount Light Unit: Mount the light unit onto the wall using the same drilling and securing method. The light unit features a 360° rotating bracket for adjustable illumination direction.
- Connect Cable: Connect the 3-meter charging cable from the solar panel to the Type-C port on the light unit.

Figure 3: Step-by-step guide for easy installation.
5. Operating Instructions
The GGBEE Solar Light offers multiple operating modes for both wall lighting and portable camping use. It features an upgraded motion sensor with a 120° detection angle and a range of 3-5 meters (10-16 feet).

Figure 4: Upgraded motion sensor capabilities.
5.1. Wall Light Modes (Controlled by Remote or Main Switch)
Ensure the main switch on the light unit is turned ON before using the remote control.

Figure 5: Visual representation of the three wall light modes.
- Mode 1 (Motion Sensor - Full Brightness then Off): At night, the light stays off. When human motion is detected, it turns on at 100% brightness. After approximately 20 seconds of no motion, the light turns off.
- Mode 2 (Motion Sensor - Full Brightness then Dim): At night, the light stays on at 10% brightness. When human motion is detected, it turns on at 100% brightness. After approximately 20 seconds of no motion, the light returns to 10% brightness.
- Mode 3 (Always On - 30% Brightness): At night, the light is always on at 30% brightness. The human body sensor mode is inactive in this setting.
To cycle through these modes, click the main switch on the light unit or use the corresponding MODE buttons on the remote control.

Figure 6: Wireless remote control for mode selection.
5.2. Camping Light Modes (Portable Use)
The light unit can be detached and used as a portable camping light, featuring a foldable utility hook for easy hanging.

Figure 7: Light unit used as a hanging light.

Figure 8: Four distinct camping light modes.
- Mode 1 (Spotlight 100% Brightness): Long press the switch for 5 seconds to activate the spotlight at 100% brightness.
- Mode 2 (Spotlight 25% Brightness): Click the switch (after Mode 1) to switch to spotlight at 25% brightness.
- Mode 3 (Spotlight SOS Mode): Click the switch (after Mode 2) to activate the spotlight in SOS flashing mode.
- Mode 4 (Floodlight 100% Brightness): Click the switch (after Mode 3) to activate the floodlight at 100% brightness.
6. Maintenance
- Cleaning: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, or debris that may obstruct sunlight absorption. Clean the light unit as needed.
- Battery: The unit contains a 1500mAh Lithium Battery. Ensure the solar panel is exposed to sufficient sunlight for optimal charging. The battery is not user-replaceable.
- Connections: Periodically check the connecting cable between the solar panel and the light unit to ensure it is securely plugged in and free from damage.
7. Troubleshooting
- Light not turning on at night:
- Ensure the main switch on the light unit is ON.
- Verify the solar panel is receiving direct sunlight and is not obstructed.
- Check if the connecting cable is securely plugged in.
- Allow the solar panel to charge for at least 6-8 hours in direct sunlight before first use.
- Motion sensor not working:
- Confirm the light is set to Mode 1 or Mode 2 (motion sensor modes).
- Ensure there are no obstructions blocking the sensor's field of view.
- Test the sensor by walking within its 3-5 meter range.
- Remote control not responding:
- Ensure the main switch on the light unit is ON.
- Check the battery in the remote control and replace if necessary.
- Ensure there is no direct obstruction between the remote and the light unit.
8. Specifications
| Feature | Detail |
|---|---|
| Product Name | Solar motion sensor light |
| Model Number | TG-TY16401 |
| Brand Name | GGBEE |
| Material | ABS |
| Built-in Battery | 1500 mAh Lithium Battery |
| Light Color | White light |
| Sensing Distance | 3-5 meters |
| Net Weight (with solar panel) | 519g |
| Working Modes | 7 lighting modes (3 Wall Light, 4 Camping Light) |
| Light Source Type | 158 LEDs + XPE |
| Solar Panels | Polycrystalline silicon |
| Water Resistance Level | Living level waterproof (IP65) |
| Specific Uses | Outdoor use, EMERGENCY |
| Installation Method | Assembly / Self-contained |
| Power Source | Solar |
| Style | Modern Style |
| Certification | CE |
| Is Dimmable | Yes |
| Is Batteries Included | Yes |
| Is Bulbs Included | No (integrated LEDs) |

Figure 9: Product components and dimensions.

Figure 10: Comprehensive product specifications.
9. User Tips
- For optimal performance, ensure the solar panel is positioned to receive at least 6-8 hours of direct sunlight daily. This will allow the 1500mAh battery to fully charge, providing 6-12 hours of continuous lighting.
- The motion sensor has a detection range of 3-5 meters. Consider this when positioning the light for security or convenience.
- The split design with a 3-meter cable offers great flexibility. You can mount the solar panel on the roof for maximum sun exposure and the light unit in a shaded area like a porch or garage.
- Utilize the remote control to easily switch between the various wall light modes and adjust brightness without needing to reach the unit directly.
10. Warranty and Support
For any questions, technical support, or warranty claims regarding your GGBEE TG-TY16401 Outdoor Solar Light, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.