Introduction
Thank you for choosing the AIRITON AI-8088 PoC Network Walkie Talkie. This device is designed for reliable, long-distance communication using 4G cellular networks, offering features like Zello, GPS, Wi-Fi, and Bluetooth connectivity. Its robust IP68 waterproof and dustproof design ensures performance in various environments. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device.
Safety Information
Please read all safety warnings and instructions carefully before using the device to ensure safe and optimal performance. Keep the device away from extreme temperatures, direct sunlight, and corrosive substances. Do not attempt to disassemble or modify the device, as this will void the warranty and may cause damage or injury. Use only approved accessories.
Package Contents
Before use, please inspect the product packaging for any signs of damage. Carefully open the packaging and verify that it contains all the items listed below. If you notice any missing or damaged parts, please contact your dealer immediately.
Image: Contents of the AI-8088 package, showing the radio, antenna, battery, Type-C cable, plug, clip, sling, and user manual.
- Radio Body x 1
- Antenna x 1
- Belt Clip x 1
- Battery Pack x 1
- Charger Dock (optional) x 1
- Charging Cable (Type-C) x 1
- Power Supply (Plug) x 1
- Hand Strap (Sling) x 1
- User Manual x 1
Note: SIM cards are not included in the package.
Product Overview
Familiarize yourself with the various parts and controls of your AI-8088 PoC Radio.
Image: Labeled diagram of the AI-8088 device components.
- Antenna
- Indicator
- LCD Display
- PTT Button
- Side Key 1
- Side Key 2
- Confirm Key
- Dial Key
- Numeric Keypad
- Speaker
- Power / Volume Knob
- Audio Jack (M6)
- Up/Down Keys
- Return Key
- Hang Up Key
- Microphone
- Type-C Jack (Charging Port)
- Emergency Button
Setup
Battery Charging
Image: Type-C Fast Charging options, including USB Adapter, Power Bank, PC Charging, and Vehicle Charging.
The device uses a Li-Polymer battery with 3700mAh capacity. Charging time is approximately 6 hours.
- Using Type-C Cable: Insert the Type-C charging cable into the corresponding Type-C port on the radio and connect it to a power source (e.g., USB adapter, power bank, PC, vehicle charger).
- Using Charging Dock (Optional): Connect the power supply to an electrical outlet, and then place the radio into the charging dock. The charging dock's red light will remain steadily lit, indicating a normal power connection and that the device is charging.
Note: The charging dock is an optional accessory and may not be included with every PoC radio.
SIM Card Installation and Dual SIM Usage
The AI-8088 supports dual SIM single standby. You can use any two SIM cards registered on the platform. SIM cards are not included with the device.
- Insert SIM Cards: Carefully open the SIM card slot cover and insert your SIM cards.
- Power On: After inserting the SIM cards, power on the device.
- Configure SIM Settings: Navigate to Menu > Settings > SIM Card Management.
- In the SIM selection interface, use the Up/Down keys to select the SIM card you want to use, then press the Confirm key to connect.
Power On/Off
- Power On: Insert the battery and press and hold the Power/Volume knob for 3 seconds.
- Power Off: When the screen is on, press and hold the Power/Volume knob to bring up the prompt, then select "Power Off" or "Restart."
Operation
Volume Adjustment
When the screen is on, rotate the Power/Volume knob to adjust the volume:
- Clockwise: Increase volume.
- Counterclockwise: Decrease volume.
Screen On/Off
- On: When the screen is off, briefly press the Power/Volume knob to wake the screen.
- Off: When the screen is on, briefly press the Power/Volume knob to turn off the screen, or the screen will automatically turn off after a period of inactivity.
Main Interface Navigation
When the screen is on, use the Up/Down keys on the main interface to navigate through options such as Groups, Group Members, Dispatch Notifications, Recording, and Menu.
- Groups: In the Groups section, press the Confirm key to enter the group list. Use the Up/Down keys to select a group, then press the Confirm key to enter the selected group.
- Group Members: In the Group Members section, press the Confirm key to enter the member list. Use the Up/Down keys to select a member, then press the Confirm key to display options for Direct Call or IP Call.
- Direct Call: Press and hold the PTT button to start a direct call with the selected member. After the call, briefly press the Return key to go back to the member list.
- IP Call: Briefly press the PTT button to initiate an IP call. Once the other party answers, the call will begin. After the call, briefly press the Return key to go back to the member list.
- Dispatch Notifications: In the Dispatch Notifications section, press the Confirm key to enter the notification list.
- Recording: In the Recording section, press the Confirm key to enter the recording list. Use the Up/Down keys to select a recording, then press the Confirm key to play it.
Side Key Functions
- Side Key 1:
- Brief Press: Enters the group list and announces the current group. Use Up/Down keys to select a group, then Confirm to enter.
- Press and Hold: Hears the username and remaining battery level.
- Side Key 2:
- Brief Press: Enters the member list. Use Up/Down keys to select a member, then Confirm to display options for Direct Call or IP Call (as described above).
- Press and Hold: Enters the settings list.
Call Function (Phone Calls)
The AI-8088 supports answering and making regular phone calls using an installed SIM card.
- Making a Call:
- From Standby: Press the numeric keys to enter the phone number, then press the Dial key to make the call.
- From Menu: Go to Menu > Settings > Phone, input the phone number, and press the Dial key.
- From Contacts: Go to Menu > Settings > Contacts > Address Book, select a contact, and press the Confirm key. Choose "Direct Call" to dial the number.
- Answering/Rejecting Calls:
- To Answer: Press the Dial key.
- To End/Reject: Briefly press the Hang Up key.
- Text Input: In any text editing interface, press the # key to switch input methods.
Connectivity (Wi-Fi & Bluetooth)
Image: The AI-8088 device demonstrating Bluetooth and Wi-Fi connectivity, including hotspot sharing.
- Wi-Fi:
- In the settings list, use the Up/Down keys to select Wi-Fi, then press the Confirm key to enter Wi-Fi mode.
- In the Wi-Fi settings interface, press the Confirm key to turn on Wi-Fi. You will see options for "Connected Network," "Available Networks," and "Configured Networks."
- Select an available network, enter the password, and press the Confirm key to connect.
- Bluetooth:
- In the settings list, use the Up/Down keys to select Bluetooth, then press the Confirm key to enter Bluetooth mode.
- In the Bluetooth settings interface, press the Confirm key to turn on Bluetooth. You will see options for "Discoverable," "Paired Devices," and "Available Devices."
- Select an available device and press the Confirm key to connect.
- If "Discoverable" is enabled, other devices can detect your Bluetooth device.
GPS Functionality
Image: The AI-8088 device highlighting its GPS functions, which require signals to locate.
The built-in GPS provides accurate location tracking. The device needs to receive signals to locate your position. This feature is essential for navigation and sharing your location with others.
PoC Network Communication (Zello)
Image: Multiple AI-8088 devices illustrating unlimited distance communication via cellular networks.
The AI-8088 operates as a Push-to-Talk over Cellular (PoC) device, utilizing 4G cellular networks for communication. This allows for unlimited distance communication wherever cellular signals are available, breaking the range limitations of traditional walkie-talkies. The device supports applications like Zello for group and individual communications.
Specifications
| Item | Description |
|---|---|
| Brand Name | Airiton |
| Model Number | AI-8088 |
| Walkie Talkie Type | PoC Network Walkie Talkie |
| Network | GSM Band2/3/5/8, WCDMA Band1/2/5/8, TDD-LTE Band38/40, FDD-LTE Band1/2/3/5/7/8/20/28 (CAT4) |
| Operation System | Android 5.1 |
| Memory | ROM: 4GB, RAM: 4Gb LPDDR2 |
| LCD Screen | Size: 2.0 inch, Resolution: 240*320 |
| Connector Type | Audio & Data: M6 Pin, Charging & Data: Type-C |
| SIM Card | Dual SIM Cards, Single Standby |
| Battery | Li-Polymer battery 3700mAh, Charger current: 1000mA, Charging Time: <= 6 Hours |
| Sound | Microphone: 2, Speaker: Speaker and Speaker PA |
| Bluetooth | BT4.0 |
| Wi-Fi | Standard 802.11b/g/n 1X1, Support Wi-Fi Router, Android Hotspot (Wi-Fi Tethering) |
| Positioning | GPS / Beidou |
| G-sensor | Support |
| Dimensions | 134mm*58mm*32mm |
| Weight | 240g (include battery & antenna) |
| Working Temperature | -20℃ ~ 55℃ |
| IP Rate | IP68 |
| Drop Test Height | 1.2 Meters |
Maintenance
To ensure the longevity and optimal performance of your AI-8088 PoC Radio, follow these maintenance guidelines:
- Cleaning: Wipe the device with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure all ports are dry before charging or connecting accessories.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: Avoid fully discharging the battery frequently. For long-term storage, charge the battery to about 50% and store it separately if possible.
- Waterproof Seals: While the device is IP68 waterproof, regularly check the integrity of port covers and seals to ensure they are properly closed to maintain water resistance.
Troubleshooting
If you encounter issues with your AI-8088, refer to the following common troubleshooting steps:
| Problem | Solution |
|---|---|
| Device does not power on. | Ensure the battery is correctly inserted and fully charged. Press and hold the Power/Volume knob for at least 3 seconds. |
| Cannot make or receive calls. | Check if SIM cards are properly inserted and activated. Ensure you have cellular network coverage. Verify SIM settings under Menu > Settings > SIM Card Management. |
| No Wi-Fi or Bluetooth connection. | Ensure Wi-Fi/Bluetooth is enabled in settings. Check for available networks/devices. Re-enter passwords if necessary. Ensure "Discoverable" is on for Bluetooth pairing. |
| GPS not locating. | Ensure the device has a clear view of the sky to receive GPS signals. Location services must be enabled. |
| Audio issues (no sound/low volume). | Adjust the volume using the Power/Volume knob. Check if the speaker or microphone ports are obstructed. |
If the problem persists after trying these steps, please refer to the full user manual PDF or contact customer support.
User Tips
- Zello Application: The device is Android-based and fully supports the Zello application for Push-to-Talk communication. You can download and install Zello from the app store or pre-installed applications.
- Regular Phone Calls: Yes, the AI-8088 can make and receive regular phone calls using an active SIM card, functioning like a standard mobile phone in addition to its PoC capabilities.
- Android Version: The device runs on Android 5.1. While it features a display, it primarily uses physical buttons for navigation and interaction, rather than a touchscreen.
- Network Coverage: For unlimited distance communication, ensure you have stable 4G cellular network coverage. The device relies on this for its PoC functionality.
Warranty and Support
For warranty information, technical support, or service inquiries, please contact your original point of purchase or the manufacturer's authorized service center. Keep your purchase receipt as proof of purchase.
A detailed user manual in PDF format is available for download: User Manual (PDF).
