hirisi S8

Contents

HIRISI S8 Wireless Carp Fishing Bite Alarm System

Model: S8-3 (1+3 Set) & S8-4 (1+4 Set)

1. Introduction

The HIRISI S8 Wireless Carp Fishing Bite Alarm System is designed to enhance your fishing experience by providing clear and immediate alerts when a fish bites. This system features a 2-way remote control, LED and sound alerts, and an anti-theft function, making it ideal for night fishing and ensuring you never miss a catch. This manual provides detailed instructions for setting up, operating, and maintaining your S8 system.

Hirisi S8 Wireless Fishing Alarm Set with 2-Way Remote Control and Anti-theft Function
The HIRISI S8 Wireless Fishing Alarm Set, featuring 2-way remote control and anti-theft function.

2. Package Contents

Your HIRISI S8 Wireless Carp Fishing Bite Alarm System comes in a protective zipped PU case and includes:

  • Bite Alarms (3 for S8-3 set, 4 for S8-4 set)
  • Wireless Receiver
  • Protective Zipped PU Case
  • User Manual (this document)

Note: Batteries are not included and must be purchased separately.

Hirisi S8 bite alarm set and receiver neatly arranged in a protective zipped case.
The HIRISI S8 system components stored in its protective case.

3. Setup

3.1 Battery Installation

  • Bite Alarms: Each bite alarm requires 1 x 9V battery. Open the battery compartment on the back of the alarm and insert the battery, ensuring correct polarity.
  • Receiver: The wireless receiver requires 3 x AAA batteries. Open the battery compartment and insert the batteries, observing correct polarity.
Diagram showing battery requirements: 1x 9V for the bite alarm and 3x AAA 1.5V for the receiver.
Battery requirements for the bite alarm (9V) and receiver (3x AAA).

3.2 Mounting Bite Alarms

Screw each bite alarm onto your fishing rod pod or bank stick. Ensure the alarm is securely fastened and positioned to allow the fishing line to pass freely over the ultra-sensitive alarm roller.

Two Hirisi S8 bite alarms mounted on fishing rods by a lake.
Bite alarms mounted on fishing rods, ready for use.

3.3 Connecting LED Swingers

Each bite alarm features an additional 2.5mm jack for connecting an illuminated swinger. Plug your LED swinger into this jack for enhanced visual indication.

Hirisi S8 bite alarm with a fishing line and swinger attached, set up by a grassy bank.
Bite alarm with an attached swinger, providing visual bite indication.

4. Operating Instructions

4.1 Power On/Off

  • Bite Alarms: Long press the 'on/off' button on each alarm to power it on or off.
  • Receiver: Use the dedicated power button on the receiver to turn it on or off.

4.2 Adjusting Settings (Bite Alarm)

Each bite alarm has three adjustable knobs for fine-tuning:

  • Volume (V): Adjusts the sound level of the alarm.
  • Tone (T): Changes the pitch of the alarm sound.
  • Sensitivity (S): Controls how much line movement is required to trigger the alarm.
Close-up of the bite alarm showing adjustable controls (volume, tone, sensitivity), snag-free ear bars, high-output speaker, and 2.5mm swinger jack.
Detailed view of the bite alarm's adjustable controls and features.

4.3 Adjusting Settings (Receiver)

The receiver allows you to control its own volume, tone, and vibration settings. Refer to the receiver's controls for these adjustments.

4.4 Remote Control Function

The receiver acts as a 2-way remote control. Press the corresponding buttons on the receiver to remotely adjust the volume, tone, sensitivity, night light, and anti-theft function of the linked bite alarms.

Image showing the remote control function of the receiver, with labels for sensitivity (S), tone (T), volume (V), night light, and anti-theft function.
The receiver's interface for remote control of bite alarm settings.

4.5 Bite Indication

  • LED Warning: The bite alarms feature LED lights that illuminate for both 'Run' (line moving away) and 'Drop' (line slackening) indications. The signal memory LED will stay lit for 20 seconds after a bite.
  • Sound Alert: A high-output speaker provides an audible alert.
  • Night Light: The night light function can be turned on or off as needed for visibility in low-light conditions.
Close-up of the bite alarm's LED indicators for run and drop, and the function button.
LED indicators on the bite alarm for 'Run' and 'Drop' events.
Close-up of the ultra-sensitive alarm roller on the bite alarm, with 'Run' and 'Drop' indicators and the on/off button.
The ultra-sensitive alarm roller provides quick response to line movement.

4.6 Anti-Theft Function

The system includes an anti-theft warning that activates if a fishing rod is picked up from the bite alarm. This provides an additional layer of security for your equipment.

5. Maintenance

  • Cleaning: Wipe the alarms and receiver with a soft, damp cloth after each use to remove dirt and debris. Do not use harsh chemicals or abrasive cleaners.
  • Water Resistance: The units are waterproof for rain, but not designed for submersion. Avoid dropping them into water.
  • Battery Care: Remove batteries if the system will not be used for an extended period to prevent leakage and damage.
  • Storage: Store the system in its protective zipped PU case in a cool, dry place when not in use.

6. Troubleshooting

  • No Signal/Alarms Not Responding:
    • Check if both the bite alarms and receiver are powered on.
    • Ensure batteries are correctly installed and have sufficient charge.
    • If the bite alarm and receiver do not match, they can be re-linked. Refer to the original packaging or contact support for specific re-linking instructions if needed.
    • Ensure you are within the 150-meter wireless transmission range.
  • Weak/No Sound:
    • Check the volume settings on both the bite alarm and receiver.
    • Replace batteries if they are low.
  • False Alarms:
    • Adjust the sensitivity setting on the bite alarm to a lower level.
    • Ensure the fishing line is running smoothly over the roller and not snagged.

7. Specifications

FeatureDescription
ModelS8-3 (1 Receiver + 3 Alarms), S8-4 (1 Receiver + 4 Alarms)
MaterialABS
Wireless RangeMore than 150 meters
Bite Alarm Battery1 x 9V battery (not included)
Receiver Battery3 x AAA batteries (not included)
Water ResistanceWaterproof for rain
AlertsHigh output speaker, LED warning (Run/Drop), Signal memory LED (20 seconds)
ControlsVolume, Tone, Sensitivity (on alarms); Volume, Tone, Vibration (on receiver)
Additional Features2-Way Remote Control, Night Light (on/off), Anti-theft warning, 2.5mm jack for illuminated swinger, Snag-Free Ear Bars, Ultra-Sensitive Alarm Roller
PackageProtective zipped PU case
Image showing the S8-3 and S8-4 sets, differentiating by the number of alarms and their LED colors.
The S8-3 and S8-4 sets, indicating the number of alarms included.

8. User Tips

  • Confirm Your Set: When purchasing, ensure you select the correct set (S8-3 for 3 alarms, S8-4 for 4 alarms) to match your fishing needs. The system includes both the remote receiver and the bite alarms as a complete set.
  • Battery Life: Always carry spare batteries, especially for longer fishing trips, to ensure continuous operation of your alarms and receiver.
  • Optimal Placement: Position your bite alarms and receiver to minimize obstructions for the best wireless range and signal reliability.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the seller's policies or contact the hirisi Official Store directly through your purchase platform. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.