Alctron MA616

Contents

Alctron MA616 Adjustable Suspension Boom Microphone Stand

User Manual

Introduction

The Alctron MA616 is an adjustable suspension boom scissor arm microphone stand designed for studio recording, online singing, chatting, broadcasting, and other audio applications. It features an all-tube design with integrated cable management, flexible angle adjustments, and an optional LED light in the T-stand. This manual provides instructions for setting up, operating, and maintaining your MA616 microphone stand.

Features

  • All-tube and inner cable design for a neat, fluent, and concise appearance.
  • Adjustable LED light in the T-stand with red, blue, and purple color options.
  • Freely adjustable joints for accurate positioning of the microphone angle.
  • Two interchangeable bases: a C-type clamp and a thumbscrew base for versatile installation.
  • Sturdy and stable support for microphones, suitable for various recording and broadcasting environments.
  • Available in three sizes (XS, M, XL) to accommodate different bearing capacities and movable distances.
  • Flexible installation and elegant design for a convenient user experience.

Package Contents

Please check that all the following items are included in your package:

  • Alctron MA616 Adjustable Suspension Boom Microphone Stand
  • C-type Clamp Base
  • Thumbscrew Base (Desk Insert Base)
  • Integrated USB Cable (for LED light and connectivity)

Note: Microphone and shock mount are not included.

Setup Instructions

  1. Choose and Install the Base:

    The MA616 comes with two interchangeable bases: a C-type clamp and a thumbscrew (desk insert) base. Choose the base that best suits your setup.

    Two interchangeable bases: C-clamp and desk insert
    Image: Two interchangeable bases for the MA616 stand.
    • C-type Clamp Base: Attach the C-clamp to the edge of your desk or table. Tighten the knob securely until the clamp is firm and stable. Ensure the desk thickness is within the 1-50mm clamping range.
    • C-clamp base attached to a desk
      Image: C-clamp base securely attached to a desk.
    • Thumbscrew Base (Desk Insert): Drill a suitable hole in your desk (if not already present) and insert the thumbscrew base. Secure it from underneath with the provided nut.
  2. Mount the Stand:

    Insert the main boom arm into the installed base. Ensure it is seated firmly.

  3. Attach Your Microphone:

    Screw your microphone's shock mount or clip onto the threaded adapter at the end of the boom arm. Ensure it is tightened securely.

    Alctron MA616 stand with microphone on a desk
    Image: MA616 stand with a microphone set up on a desk.
  4. Connect Cables:

    Route your microphone's XLR cable through the integrated cable channels of the stand for a clean setup. If your MA616 model includes an LED light, connect the integrated USB cable to a power source (e.g., computer USB port, USB wall adapter) to illuminate the LED.

    Alctron MA616 microphone stand with integrated cables and USB/XLR connectors
    Image: MA616 stand showing integrated cable management and connectors.

Operating Instructions

  1. Adjusting the Stand Position:

    The MA616 features multiple adjustable joints. Loosen the knobs on each joint to adjust the angle and position of the boom arm. Once the desired position is achieved, tighten the knobs firmly to secure the stand.

    • Mic Angle Adjustable Range: 55° - 265°
    • Height Stand Angle Adjustable Range: 30° - 180°
    • Bottom Stand Angle Adjustable Range: 30° - 180°
    Close-up of an adjustable joint on the Alctron MA616 stand
    Image: Adjustable joint for precise positioning.
    Diagram showing adjustable angles of the microphone stand joints
    Image: Diagram illustrating the range of motion for the stand's joints.
  2. LED Light Operation:

    If your MA616 stand is equipped with an LED light in the T-stand, ensure the integrated USB cable is connected to a powered USB port. The LED light will illuminate, and you can typically cycle through the red, blue, and purple color options using a control button on the stand (if available) or it may cycle automatically.

    Alctron MA616 microphone stand with LED light on the microphone end
    Image: MA616 stand with the LED light illuminated.

Specifications

Alctron MA616 Microphone Stand Specifications
Feature Specification
Model Number MA616
Material Aluminum
Available Sizes XS, M, XL
T Stand Length (XS) 26cm
T Stand Length (M) 36.5cm
T Stand Length (XL) 52cm
Bottom Stand Length (XS) 26cm
Bottom Stand Length (M) 36.5cm
Bottom Stand Length (XL) 52cm
Max Bearing Weight (XS) 2.5kg
Max Bearing Weight (M) 2.3kg
Max Bearing Weight (XL) 2.0kg
Mic Angle Adjustable Range 55° - 265°
Height Stand Angle Adjustable Range 30° - 180°
Bottom Stand Angle Adjustable Range 30° - 180°
Clamp Clipping Thickness 1-50mm
LED in T Stand Color Red/Blue/Purple (selectable)
Diagram illustrating the three available sizes (XS, M, XL) of the stand
Image: Visual representation of the three available stand sizes.

Maintenance

  • Cleaning: Wipe the stand with a soft, dry cloth to remove dust. For stubborn marks, use a slightly damp cloth and mild soap, then dry thoroughly. Avoid abrasive cleaners or solvents.
  • Joints and Knobs: Periodically check all adjustable joints and knobs to ensure they are functioning smoothly and securely. Do not overtighten the knobs, as this can cause damage.
  • Cable Management: Ensure that the integrated cables are not pinched or stressed. Proper cable routing helps maintain the stand's clean aesthetic and prevents cable damage.
  • Storage: When not in use for extended periods, store the stand in a clean, dry environment to prevent dust accumulation and potential damage.

Troubleshooting

  • Stand is not stable:
    • Ensure the chosen base (C-clamp or thumbscrew) is securely attached to the desk/surface.
    • Verify that the boom arm is fully inserted into the base.
    • Check that all adjustable knobs are tightened after positioning the stand.
  • Microphone sags or drifts:
    • Confirm that the microphone and its mount are securely attached to the stand's adapter.
    • Tighten the adjustable knobs on the stand's joints more firmly.
    • Ensure the total weight of your microphone and shock mount does not exceed the stand's maximum bearing weight (refer to specifications for your stand size).
  • LED light is not working:
    • Check that the integrated USB cable is properly connected to a powered USB port.
    • Try connecting the USB cable to a different USB port or power adapter.

User Tips

  • Cable Management: Utilize the stand's inner cable design to keep your setup tidy and professional. Secure any excess cable with ties to prevent tangles and improve aesthetics.
  • Optimal Positioning: Experiment with different angles and distances to find the optimal microphone placement for your voice or instrument, minimizing unwanted room reflections and maximizing sound quality.
  • Desk Protection: When using the C-clamp base, consider placing a protective pad between the clamp and your desk surface to prevent scratches or indentations.

Warranty and Support

For warranty information, technical support, or any questions regarding your Alctron MA616 microphone stand, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

© 2024 Alctron. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.