ECHTPower ES01BK

Contents

ECHTPower Wireless Controller User Manual

Model: ES01BK

1. Introduction

Package Contents

  • Wireless Controller x 1
  • Charging Cable x 1
  • Instruction Manual x 1

Compatibility

The ECHTPower ES01BK Wireless Controller is compatible with the following platforms:

  • Nintendo Switch / Switch Lite / Switch OLED
  • PC
  • Android
  • iOS

2. Specifications

Technical Parameters

Power SupplyBuilt-in polymer battery
Usage Time10-16 hours
Battery Capacity800mAh
Charging Time2.5 hours
Charging VoltageDC 5V
Charging Current250mA
Model NumberES01BK
Joystick Sensor Module Brand/TypeK-SLIVER
Trigger Button TypeHall-Linear
Hall EffectYes
Battery IncludedYes
Interface TypeUSB
TypeGamepads
Diagram showing the 800mAh large capacity battery inside the controller
The controller features an 800mAh large capacity battery for extended play time.
Close-up of Hall Effect Joystick with internal mechanism diagram
Detail of the Hall Effect Joystick, highlighting its precision and durability for position detection.

3. Product Diagram

ECHTPower ES01BK Wireless Controller front view
Front view of the ECHTPower ES01BK Wireless Controller.
ECHTPower ES01BK Wireless Controller with Hall Effect Joysticks and RGB lighting
The ECHTPower ES01BK Wireless Controller featuring Hall Effect Joysticks and customizable RGB lighting.

Controller Layout

Detailed diagram of ECHTPower ES01BK Wireless Controller buttons and ports
Detailed diagram showing the layout of buttons, joysticks, and ports on the ECHTPower ES01BK Wireless Controller.
  • Home Button: Powers on the controller.
  • Turbo Button (+ Button): Activates and manages turbo functions.
  • Screen Capture Button (- Button): Captures screenshots.
  • A/B/X/Y Buttons: Standard action buttons.
  • Left Joystick / L3: Left analog stick, press for L3.
  • Right Joystick / R3: Right analog stick, press for R3.
  • D-pad: Directional pad.
  • M Button: Used for macro programming.
  • R Button: Right shoulder button.
  • L Button: Left shoulder button.
  • ZR Button: Right trigger button.
  • ZL Button: Left trigger button.
  • Type-C Charging Port: For charging the controller.
  • Charging Indicator: Shows charging status.
  • Pairing Button: Initiates pairing mode.
  • Channel LED: Indicates connected channel.
  • ML Button: Macro Left button.
  • MR Button: Macro Right button.
  • Vibration Switch: Controls vibration function.
  • Light Switch Key: Controls RGB lighting.

4. Setup and Connection

Initial Use

  • Before initial use, the controller needs to be charged using the provided data cable to activate it.
  • Power On: Press the Home button lightly.
  • Power Off: Press the pairing button lightly.

Connection Methods for Various Devices

Table 1: Connection Methods
PlatformConnection MethodPower On CombinationDevice NameIndicator Lights
SwitchWiredUSB Direct Plug-Automatic channel indicator light
BluetoothLong press pairing button for 3 seconds-
PCWired XinputUSB direct insertionXbox 360 ControllerLED1+LED4
Wired DinputLong press +- in Wired Xinput modeGamepadLED2+LED3
Bluetooth XinputY + pairing buttonXbox 360 ControllerLED1+LED4
Bluetooth DinputX + pairing buttonGamepadLED2+LED3
iOSBluetoothY + pairing buttonXbox 360 ControllerLED1+LED4
AndroidBluetoothX + pairing buttonGamepadLED2+LED3

Note for Switch Wired Connection: When connecting to the Switch via a wired connection, ensure that the "Settings → Handle and Sensor → Pro Handle Wired Connection" function is enabled in your Switch's system settings.

5. Operating Instructions

5.1 Turbo Rapid Fire Function

Supported buttons for Turbo function: A, B, X, Y, L, R, ZL, ZR, D-pad.

  • Manual Turbo: Hold the T button, then press and hold one of the supported buttons for 3 seconds. The controller will vibrate once to activate manual rapid fire.
  • Automatic Turbo: Hold the T button, then press and hold the button already configured for manual rapid fire again for 3 seconds. The controller will vibrate once to activate automatic rapid fire.
  • Disable Turbo: Hold the T button, then press and hold the button configured for automatic rapid fire again for 3 seconds. The controller will vibrate once to disable the rapid fire function for that button.
  • Clear All Turbo Settings: Press and hold the "TURBO" button for 3 seconds to clear rapid fire settings for all buttons.
  • Speed Adjustment: Rapid fire speed can be adjusted to fast, medium, or slow. The default setting is slow. To adjust, hold the "TURBO" button on the controller and simultaneously move the right joystick up (increase speed) or down (decrease speed).
Controller with Ultra Turbo Function highlighted
Illustration of the Ultra Turbo Function, designed to reduce repetitive keystrokes and fatigue.

5.2 Macro Setting for Back Buttons

Supported buttons for Macro programming: A, B, X, Y, L, R, ZL, ZR, L3, R3, D-PAD.

  • Entering Programming Mode: Press and hold the M button for 2 seconds. The left and right 3D rings will slowly flash (requires LED effects to be enabled), indicating the controller has entered programming mode.
  • Mapping a Button: While in programming mode, press the button you want to program (map). The left and right 3D rings will flash quickly.
  • Programming Confirmation: Press ML or MR. The left and right 3D rings will change from fast flashing to steady, indicating successful button programming (mapping).
  • Note: You can program up to 16 buttons. If no button is pressed for more than 1 minute, the controller will automatically exit programming mode.
  • Clearing Macro Settings: After holding the M button for 2 seconds and seeing the left and right 3D rings flash slowly, press ML or MR to clear the programmed back button settings.
Controller with Programmable Macro Function highlighted on back buttons
Diagram showing the programmable macro function with MR and ML buttons on the back of the controller.

5.3 Light Adjustment

  • Light Key + R3: Switch between 3 lighting modes: Steady, Breathing/Running Horse, and Rainbow.
  • Light Key + L3:
    • In Steady mode: Switch colors.
    • In Breathing/Running Horse mode: No effect.
    • In Rainbow mode: Pause rainbow effect.
  • Reset Lights to Default: Press the "+" and Turbo Combo Key simultaneously for 3 seconds. The motor vibrates briefly, resetting the lights to default settings.
  • Turn On/Off Joystick Ring Lighting: Press and hold the lighting button for 10 seconds to turn off the 3D joystick ring lighting. Press and hold the lighting button again for 10 seconds to reactivate the joystick ring lighting.
Controller with 9-color RGB lighting options
Visual representation of the 9-color RGB lighting options, including Rainbow Flow, Steady, Breathing, and Off modes.

5.4 Vibration Adjustment

  • After connecting the controller, hold the vibration button on the back of the controller while moving the left 3D joystick up or down to increase or decrease motor vibration intensity. The controller will provide 3 seconds of vibration feedback after adjustment. Four intensity levels are available: 100%, 70%, 30%, and 0%, with 70% set as default.
  • Press and hold the vibration switch for 10 seconds to disable the vibration function of both motors. Press and hold the vibration switch again for 10 seconds to re-enable the vibration function of both motors.
Controller with Dual Vibration feature and intensity levels
Illustration of the Dual Vibration feature, showing adjustable vibration speed intensities (0%, 30%, 70%, 100%).

6. Maintenance

6.1 Charging

  • Connect the adapter using a USB data cable. The charging indicator will remain orange while charging.
  • Once fully charged, the orange charging indicator will turn off.

6.2 Low Battery Indication

  • When the battery is low, the light of the current channel will flash quickly as a reminder to charge the controller.

6.3 Standby Mode

  • When the controller is powered on, short press the "Pairing" button to enter standby mode.
  • When the controller is in pairing mode, it will automatically enter standby mode if pairing is unsuccessful after 60 seconds.
  • When the controller is connected to the console, it will automatically enter standby mode after 15 minutes of inactivity.

7. Troubleshooting

Resetting the Controller

  • If the controller malfunctions, you can reset it by pressing and holding the "HOME" button for 10 seconds.

8. Warranty and Support

Contact Information

  • Tel: 0755-21010839
  • Email: service@echtpower.com
  • Web: www.echtpower.com
  • Manufacturer: Shenzhen Mike Morgen Technology Co., Ltd
  • Address: Room 302, 3rd Floor, Building 5, Zone C, Jinxiu Huacheng Science and Technology Park, No. 36 Xiangjiaotang Second Road, Xiangjiaotang Community, Bantian Street, Longgang District, Shenzhen

Declaration of Conformity

Model: ES01

The product conforms to EC standards for radio interference. Shenzhen Mike Morgen Technology Co., Ltd. in Shenzhen announces that ES01 radio equipment conforms to the Directive EN IEC 62368-1:2020+A11:2020; EN 50663:2017, EN 62479:2010; ETSI EN 301 489-1 V2.2.3(2019-11); ETSI EN 301 489-17 V3.2.4(2020-09); ETSI EN 300 328 V2.2.2(2019-07).

The full text of the EU Declaration of Compliance can be found on: www.echtpower.com

The product also conforms to UK standards for radio interference. The full text of the UKCA Declaration of Compliance can be found on: www.echtpower.com

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

FCC warning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

FCC ID: 2A88F-ES01

Recycling Information

The crossed-out wheeled bin symbol indicates that the product should not be disposed of with household waste but be brought to an appropriate collection point to enable recycling. According to local regulations, do not dispose of the product or rechargeable battery with normal household waste. Appropriate disposal of used products and rechargeable batteries helps to prevent negative impacts on the environment and human health.

Precautions

  • Do not expose to liquid.
  • Do not disassemble it.
  • Avoid dropping it.
  • Avoid extremely high or low temperature.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.