Meross MRS200

Contents

Meross Matter Smart Wi-Fi Roller Shutter Belt Winder

Model: MRS200

Brand: Meross

1. Introduction

The Meross Matter Smart Wi-Fi Roller Shutter Belt Winder (MRS200) is a smart device designed to automate your roller shutters. It integrates with various smart home ecosystems including Google Home, Alexa, Apple Home, and SmartThings, offering convenient control and advanced automation features. This manual provides essential information for the safe and efficient use of your device.

Meross Smart Wi-Fi Roller Shutter Belt Winder MRS200 with packaging and smart home logos

Figure 1: Meross MRS200 Product Overview

2. Safety Information

Please read and understand all safety instructions before installation and operation. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • This device is designed for indoor use only in dry rooms (Protection Type: IP20).
  • Ensure the power supply is disconnected before installation or maintenance.
  • The device features Overload Protection, CE Certification, and TUV Certification, ensuring superior safety through built-in sensors and intelligent algorithms.
  • When manually disengaging the motor during a power outage, always ensure to hold the roller shutter to prevent it from falling and causing injury or damage.
  • Do not attempt to repair or modify the device yourself. Contact qualified personnel for service.
Superior Safety features including Overload Protection, CE Certified, TUV Certified, and built-in sensors

Figure 2: Superior Safety Features

3. Package Contents

Verify that all items are present in your package:

  • Meross Smart Wi-Fi Roller Shutter Belt Winder (MRS200)
  • Light Sensor (with 1.5m cable)
  • Power Cable (2m)
  • Mounting Hardware (screws, anchors)
  • User Manual

4. Specifications

AttributeValue
Model NumberMRS200
Brand Namemeross
Power SourceAC
Input230V~ 50/60Hz
Rated Power70W
Standby Power< 0.6 W
Rated Torque10 Nm
Maximum Speed36 U/min
Transient Operation (KB)4 minutes (Maximum running time)
Noise Pressure Level (LpA)<= 70 dB(A)
Maximum Traction Force45 kg
Protection ClassII
Protection TypeIP20 (only for use in dry rooms)
Power Cable Length2m
Light Sensor Cable Length1.5m
Installation TypeFlush-Mounted
Mounting Hole Spacing165/185mm
Communication methodWi-Fi
Plug TypeEU Plug
CertificationCE
Diagram showing dimensions for the Meross MRS200, including 136mm width, 131.5mm height, 61mm depth, and 165/185mm mounting hole spacing.

Figure 3: Device Dimensions and Manual Disengagement

5. Installation

5.1 Mounting the Device

The Meross MRS200 is designed for flush-mounted installation. Ensure you have the correct mounting hole spacing (165mm or 185mm) for your window frame.

  1. Turn off the power to the area where you will be installing the device.
  2. Remove your existing roller shutter belt winder.
  3. Position the Meross MRS200 in the opening. Use the provided mounting hardware to secure the device to the wall or window frame. Refer to Figure 3 for dimensions and mounting hole spacing.
  4. Connect the roller shutter belt to the winder mechanism.

5.2 Wiring

Connect the power cable to the device and plug it into a 230V~ 50/60Hz AC outlet. If using the light sensor, connect its cable to the designated port on the device.

5.3 App Setup and Pairing

To utilize the smart features, download the Meross app from your smartphone's app store. Follow the in-app instructions to pair your MRS200 device with your Wi-Fi network. This process typically involves:

  1. Opening the Meross app and adding a new device.
  2. Following the prompts to connect the device to your home Wi-Fi network.
  3. Once connected, the app will guide you through the Auto Calibration process.

Video 1: Meross MRS200 Installation Guide - Auto Calibration

6. Auto Calibration

Auto Calibration is crucial for precise percentage-based control of your roller shutter's position. Without calibration, the roller shutter will only support fully open or fully closed operations.

6.1 App-Guided Calibration

After successful network pairing, the Meross app will prompt you to perform Auto Calibration. The app provides step-by-step instructions:

  1. Manually position your roller shutter at the midpoint of the window using the 'up' or 'down' buttons on the device.
  2. In the app, confirm the midpoint is set.
  3. Click "Start Calibration" in the app. Your roller shutter will automatically raise and lower for about 1-2 minutes to detect and set the top and bottom limits.
  4. Stay nearby during this process and do not interrupt the power supply.
Smartphone app showing auto calibration process for roller shutter, detecting top and bottom positions.

Figure 4: Auto Calibration via Meross App

6.2 Manual Calibration (for third-party apps)

If you are using a third-party Matter-compatible app that does not offer guided calibration, you can initiate it manually:

  1. After successful pairing, manually position the roller shutter at the midpoint.
  2. Press and hold both the 'Up' and 'Down' buttons on the device for 5 seconds. The device will then perform the auto-calibration sequence.

7. Operation

7.1 Manual Control

Use the 'Up' and 'Down' buttons on the device to manually open or close the roller shutter.

7.2 Remote Control (Meross App)

Control your roller shutters remotely via the Meross app from anywhere with an internet connection. The app allows you to open, close, or set the shutter to a specific percentage.

Smartphone app showing remote control of roller shutters, with a house in the background.

Figure 5: Remote Control via Meross App

7.3 Voice Control

Integrate your MRS200 with Google Home, Alexa, or Apple Home for convenient voice control. Use simple commands like:

  • "Hey Siri, set roller shutter to 50%."
  • "Alexa, raise the roller shutter."
  • "Hey Google, close the roller shutter."
Voice control examples for Siri, Alexa, and Google Assistant with the roller shutter device.

Figure 6: Voice Control Functionality

7.4 Light Sensor Automation

The optional light sensor allows the MRS200 to automatically open or close your shutters based on external light levels, optimizing natural light and energy efficiency.

Light sensor automation, showing the light sensor connected to the device near a window.

Figure 7: Light Sensor Automation

7.5 Scene Automation

Create custom routines and scenes within the Meross app or your preferred smart home platform for enhanced home comfort and security. For example, you can set shutters to open automatically if a smoke alarm triggers, helping to clear smoke.

Scene automation example: smoke alarm triggering roller shutters to open for ventilation.

Figure 8: Scene Automation Example

7.6 Ventilation Position

The device supports a dedicated ventilation position, allowing airflow while maintaining privacy and security. The shutter closes to this preset ventilation position every time it's activated.

Ventilation position feature, showing roller shutter partially open to facilitate air exchange.

Figure 9: Ventilation Position

8. Maintenance

  • Keep the device clean and free from dust. Use a soft, dry cloth for cleaning.
  • Do not use liquid cleaners or abrasive materials.
  • Ensure the roller shutter belt is free from obstructions and damage to prevent strain on the motor.

9. Troubleshooting

9.1 Common Issues

  • Device not responding: Check if the device is properly plugged in and receiving power. Ensure your Wi-Fi network is active and the device is within range.
  • Roller shutter not moving correctly (only fully open/closed): This indicates that Auto Calibration has not been performed or was unsuccessful. Follow the steps in Section 6 to calibrate the device.
  • Roller shutter exceeding limits: Re-perform Auto Calibration to ensure the top and bottom limits are correctly set.
  • Voice control not working: Ensure the device is correctly linked to your smart assistant (Google Home, Alexa, Apple Home) and that your voice commands are clear and precise.

9.2 Compatibility

  • Alexa Amazon: Yes, the Meross MRS200 is compatible with Alexa.
  • Home Assistant: As the device supports Matter, it should be compatible with Home Assistant if your Home Assistant setup includes Matter support.

10. User Tips

  • For the most precise control and to enable percentage-based adjustments, always perform Auto Calibration using the Meross app after installation.
  • When performing manual motor disengagement (e.g., during a power outage), always support the roller shutter to prevent it from falling.
  • If integrating with Home Assistant, ensure your Home Assistant instance has Matter support enabled for seamless integration.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official Meross website or contact Meross customer support directly. Keep your purchase receipt for warranty claims.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.