Estardyn 1.3 inch oeld

Contents

Estardyn 1.3 inch OLED Module with EC11 Encoder User Manual

Model: 1.3 inch OLED Module with EC11 Rotary Encoder

Brand: Estardyn

1. Product Introduction

This module integrates a 1.3-inch OLED IIC interface display and an EC11 rotary encoder onto a single board. The components are independently placed but function as one cohesive unit. It includes an additional return (BACK) and confirmation (CONFIRM) button, providing versatile input options for various DIY projects. This integrated design offers a concise, aesthetically pleasing, and convenient solution for your electronic endeavors.

Estardyn 1.3 inch OLED module with EC11 rotary encoder and pin headers
Estardyn 1.3 inch OLED module with EC11 rotary encoder and pin headers.
Top-down view of the OLED module, highlighting the display and encoder
Top-down view of the OLED module, highlighting the display and encoder.

2. Specifications

FeatureDescription
Display Type1.3-inch OLED
Display Color OptionsWhite / Blue
Resolution128x64 pixels
Driver ChipSH1106 / SH1116
InterfaceI2C (IIC)
Rotary EncoderEC11 (Plum-blossom-shaped handle, 15mm length)
Encoder Pulses20 pulses per rotation
Encoder SwitchIntegrated push switch on pin 5
Additional ButtonsConfirm (KEY1), Back (KEY0)
Power Supply (VCC)3.3V (Refer to User Tips for 5V compatibility)
Dimensions (approx.)64.90mm x 35.05mm (PCB)
Fixed HolesM3-sized holes
1.3 inch OLED module with white display and EC11 encoder
1.3 inch OLED module with white display and EC11 encoder.
1.3 inch OLED module with blue display and EC11 encoder
1.3 inch OLED module with blue display and EC11 encoder.

3. Setup and Wiring

3.1 Interface Description

  • CON (KEY1): Confirm Button Interface
  • SDA: Data Interface for OLED screen's IIC communication
  • SCL: Clock Interface for OLED screen's IIC communication
  • PSH: The key interface of EC11 rotary encoder (push switch)
  • TRA, TRB: Phase A and Phase B of EC11 rotary encoder (rotation signals)
  • BAK (KEY0): Return Button Interface
  • GND: Ground connection
  • VCC: Power supply positive (3.3V recommended)
Back view of the OLED module showing pin labels
Back view of the OLED module showing pin labels for connection.

3.2 Circuit Connection Diagrams

The following diagrams illustrate the internal circuitry for the EC11 rotary encoder, the OLED display, and the additional buttons. These are provided for advanced users or for troubleshooting purposes.

Circuit diagrams for the EC11 rotary encoder, OLED schematic, and button connections
Detailed circuit diagrams for the EC11 Rotary Encoder, OLED display, and button interfaces.

3.3 Basic Wiring Guide (Example with Arduino)

To connect the module to a microcontroller like an Arduino, follow these general steps:

  1. Power Supply: Connect the module's VCC pin to your microcontroller's 3.3V output and GND to the microcontroller's ground.
  2. I2C Communication: Connect the module's SDA pin to your microcontroller's SDA pin (e.g., A4 on Arduino Uno) and SCL to the microcontroller's SCL pin (e.g., A5 on Arduino Uno).
  3. Rotary Encoder: Connect TRA and TRB to digital input pins on your microcontroller. Connect PSH (encoder push switch) to another digital input pin.
  4. Buttons: Connect CON (KEY1) and BAK (KEY0) to separate digital input pins on your microcontroller.

Ensure to use appropriate pull-up resistors for the I2C lines if not already integrated into your microcontroller board or the OLED module itself. For the encoder and buttons, internal pull-up resistors can often be enabled in software.

4. Operating Instructions

4.1 Display Operation

The 1.3-inch OLED display operates via the I2C communication protocol. You will need a compatible library (e.g., Adafruit SSD1306 or U8g2 library for Arduino) to initialize the display and send data for text, graphics, or images. The SH1106/SH1116 driver chip is widely supported by these libraries.

4.2 Rotary Encoder (EC11) Operation

  • Rotation: The EC11 encoder provides two phase signals (TRA and TRB). By monitoring the sequence of changes on these pins, your microcontroller can detect clockwise or counter-clockwise rotation. Each 'pulse' (detent) corresponds to a specific change in the TRA/TRB state.
  • Push Switch: The encoder also features a push-button switch (PSH). This acts as a momentary switch, closing a circuit when pressed and opening when released. It can be used for selection, confirmation, or other input actions.

4.3 Additional Buttons (KEY0, KEY1) Operation

  • CON (KEY1): This button typically serves as a 'Confirm' or 'Select' input.
  • BAK (KEY0): This button typically serves as a 'Back' or 'Cancel' input.

Both buttons are momentary switches and require debouncing in your software to prevent multiple readings from a single press.

5. Maintenance

  • Handling: Handle the module with care to avoid damaging the delicate OLED screen or the encoder mechanism.
  • Cleaning: Use a soft, dry cloth to clean the display surface. Avoid using harsh chemicals or abrasive materials.
  • Storage: Store the module in a dry, anti-static environment, away from direct sunlight and extreme temperatures.
  • Power Supply: Always ensure the correct voltage (3.3V) is applied to the VCC pin. Incorrect voltage can damage the module.

6. Troubleshooting

  • Display Not Lighting Up:
    1. Check power connections (VCC and GND).
    2. Verify I2C wiring (SDA, SCL) and ensure they are connected to the correct pins on your microcontroller.
    3. Confirm that the I2C address in your code matches the module's address (commonly 0x3C or 0x3D).
    4. Ensure the correct display driver (SH1106/SH1116) is selected in your library.
    5. Check for proper initialization code in your sketch.
  • Encoder or Buttons Not Responding:
    1. Verify wiring for TRA, TRB, PSH, KEY0, and KEY1.
    2. Ensure input pins are configured correctly in your code (e.g., `INPUT_PULLUP` for buttons/encoder pins if external pull-ups are not used).
    3. Implement software debouncing for button and encoder inputs.
  • Component Damage after 5V Supply:
    1. Warning: While the PCB might indicate 3.3V/5V compatibility, some users have reported damage to a small voltage regulator when supplying 5V. It is strongly recommended to use a 3.3V power supply for VCC to prevent potential damage to sensitive components on the module. If 5V is absolutely necessary, ensure proper voltage level shifting for all data lines (SDA, SCL, TRA, TRB, PSH, KEY0, KEY1) and verify the module's specific voltage regulator can handle 5V input.

7. User Tips

  • Power Supply Caution: As noted in troubleshooting, prioritize using a 3.3V power supply for the VCC pin to ensure the longevity of the module and its components.
  • Marlin Firmware Compatibility: This module has been reported by users to work with Marlin firmware, making it suitable for 3D printer control interfaces. Ensure you have the correct display and encoder configurations in your Marlin setup.
  • Software Libraries: For Arduino users, the U8g2 library is highly recommended as it supports a wide range of OLED displays and driver chips, including SH1106/SH1116, and provides robust functionality for graphics and text.
  • Debouncing: Always implement software debouncing for the rotary encoder and push buttons to ensure accurate and reliable input readings.

8. Warranty and Support

For technical support, please refer to the product page or contact the seller directly. Information regarding specific warranty periods or repair services should be obtained from the point of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.