1. Introduction
The JONSBO TH-360 is a high-performance All-In-One (AIO) liquid CPU cooler designed to provide efficient heat dissipation for your processor. It features Addressable RGB (ARGB) fans and a cold head with an integrated digital display for real-time CPU temperature monitoring. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and longevity of your cooler.
2. Package Contents
Please verify that all components are present in your package:
- JONSBO TH-360 ARGB Radiator with integrated fans and pump/cold head
- Mounting brackets for Intel sockets (LGA 1200/115X/17XX/1851/2011)
- Mounting brackets for AMD sockets (AM4/AM5)
- Thermal paste
- Set of screws and mounting accessories

3. Specifications
| Feature | Specification |
|---|---|
| Model Number | TH-360 ARGB |
| Product Type | CPU All In One Liquid Cooler |
| Radiator Size (L x W x H) | 393mm x 120mm x 27mm |
| Fan Air Volume | 21.46-62.40 CFM (each fan) |
| Fan Bearings | Hydraulic Hybrid Bearings |
| Fan Speed | 700-2400 RPM (±10%) |
| Fan Interface | 4PIN PWM |
| Fan Noise | 21.3-37.3 dB(A) (max) |
| Pump Power | 5.4W |
| Pump Noise | < 30 dB(A) |
| Water Pump Voltage | 12V DC |
| Pump Speed | 2400 RPM (±10%) |
| D-TDP | 300W |
| Supported CPU Sockets | Intel: LGA 1150, LGA 1155, LGA 1151, LGA1200, LGA 1156, LGA 1700, LGA 1851, LGA 2011; AMD: AM4, Socket AM5 |
| RGB Support | A-RGB (5v-3pin ARGB) |
| Heatsink Material | Copper & Aluminum |
| Digital Display | Yes (on cold head) |
| Pre-filled Liquid | Yes |
| Certifications | CE, RoHS |




4. Setup and Installation
Before beginning installation, ensure your system is powered off and unplugged. It is recommended to discharge any static electricity before handling components.
4.1. Prepare the Motherboard
- Identify your CPU socket type (Intel or AMD).
- Install the appropriate backplate and standoffs for your motherboard and CPU socket.

4.2. Radiator and Fan Installation
- Attach the three ARGB fans to the radiator using the provided screws. Ensure the fan airflow direction is optimal for your case (intake or exhaust).
- Mount the radiator assembly to your PC case. Common mounting locations include the top, front, or rear of the case, depending on available space and desired airflow.
- The fans feature a combined full surface light effect and a simplified wire hiding design, using only one cable to connect to the mainboard for cleaner cable management.


4.3. Cold Head/Pump Installation
- Clean the CPU surface thoroughly.
- Apply a small amount of thermal paste to the center of the CPU.
- Carefully place the cold head onto the CPU, aligning it with the mounting holes.
- Secure the cold head with the appropriate screws, tightening them in a diagonal pattern until snug. Do not overtighten.
4.4. Wiring Connections
- Fan Power: Connect the fan power cable(s) to the 4-pin PWM fan headers on your motherboard.
- Pump Power: Connect the pump power cable to a dedicated AIO_PUMP header or a CPU_FAN header on your motherboard. Ensure it receives full power.
- ARGB Lighting: Connect the 5V-3pin ARGB cable from the cooler to a compatible 5V-3pin ARGB header on your motherboard or an external ARGB controller. This allows for synchronization with motherboard custom light effects (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync).


5. Operating Instructions
Once installed, the JONSBO TH-360 operates automatically to cool your CPU. The digital display on the cold head provides real-time CPU temperature readings.
5.1. Temperature Monitoring
- The cold head features a digital display that shows the current CPU temperature.
- For more detailed monitoring, install the JONSBO Control Panel software (if available) or use your motherboard's monitoring software. This software can display CPU temperature, motherboard model, CPU usage, CPU frequency, and memory usage.

5.2. ARGB Lighting Control
- If connected to a motherboard ARGB header, use your motherboard's RGB software to customize lighting effects.
- If using a dedicated ARGB controller, refer to the controller's manual for lighting adjustments.

5.3. Video Overview
6. Maintenance
Regular maintenance helps ensure the longevity and optimal performance of your JONSBO TH-360 cooler.
- Dust Cleaning: Periodically clean the radiator fins and fan blades using compressed air or a soft brush to remove dust buildup. Dust can impede airflow and reduce cooling efficiency.
- Cable Management: Ensure all cables are neatly routed and not obstructing airflow within the case.
- Visual Inspection: Occasionally inspect the tubing and connections for any signs of wear or leaks. While AIOs are sealed, a quick check can prevent potential issues.
7. Troubleshooting
If you encounter issues with your JONSBO TH-360, refer to the following common troubleshooting steps:
- High CPU Temperatures:
- Verify that the cold head is securely mounted to the CPU and thermal paste is properly applied.
- Check if the fans are spinning and the pump is operating (you might feel a slight vibration on the pump or hear a faint hum).
- Ensure adequate airflow in your PC case. Check fan orientation (intake/exhaust) and clear any obstructions.
- Confirm fan and pump speeds are set correctly in your motherboard's BIOS/UEFI or monitoring software.
- ARGB Lighting Not Working:
- Ensure the 5V-3pin ARGB cable is correctly connected to a compatible header on your motherboard or ARGB controller.
- Check your motherboard's RGB software or external controller settings to ensure lighting is enabled and configured as desired.
- Verify that the ARGB header on your motherboard is enabled in the BIOS/UEFI.
- Unusual Noise:
- If you hear a gurgling sound, it might indicate air bubbles in the loop. Gently tilt your PC case in different directions while running to help dislodge air bubbles.
- Ensure fans are not hitting any cables or case components.
- If the pump is making excessive noise, ensure it is receiving stable power and is not running dry (though unlikely for a pre-filled AIO).
8. User Tips
- Digital Display Customization: The digital display on the cold head is primarily for CPU temperature. For advanced customization of the display or ARGB lighting effects, check the JONSBO official website for dedicated control software or refer to your motherboard's RGB software.
- Optimal Airflow: For best cooling performance, ensure your PC case has good airflow. Consider mounting the radiator as an exhaust at the top of the case for hot air to escape, or as an intake at the front for cooler air to enter.
- Thermal Paste Application: While the cooler comes with thermal paste, ensure it is applied evenly and thinly for maximum heat transfer.
9. Warranty and Support
For warranty information, please refer to the documentation provided with your purchase or visit the official Jonsbo website. If you require technical assistance or have questions not covered in this manual, please contact Jonsbo customer support or your retailer.