UGREEN CM841

Contents

UGREEN Mac Mini Docking Station CM841

User Manual

1. Introduction

Thank you for choosing the UGREEN Mac Mini Docking Station (Model CM841). This 10-in-1 expansion hub is specifically designed to enhance the connectivity and storage capabilities of your Mac Mini M4 or M4 Pro. It integrates multiple ports, including a DisplayPort for high-resolution video output, high-speed USB ports, an M.2 NVMe SSD slot for expanded storage, and card reader slots, all within a compact and Mac Mini-matching design.

Note: The Mac Mini shown in the images is for display purposes only and is not included with the docking station.

UGREEN Mac Mini Docking Station connected to a Mac Mini, highlighting DisplayPort and 4K@240Hz capabilities.

Figure 1: UGREEN Mac Mini Docking Station with DisplayPort 4K@240Hz capabilities.

2. Key Features

  • 10-in-1 Expansion: Provides a comprehensive set of ports for enhanced connectivity.
  • M.2 NVMe SSD Slot: Supports up to 8TB of additional storage with 10Gbps transfer speeds. Compatible with 2230, 2242, 2260, and 2280 M.2 NVMe SSD sizes.
  • High-Resolution DisplayPort: DP1.4 output supporting up to 4K@240Hz for Mac Mini M4 Pro, and 4K@144Hz for Mac Mini M4. Backward compatible with various resolutions and refresh rates.
  • High-Speed USB Ports: Includes 4x USB-A 3.2 Gen2 (10Gbps) and 2x USB-C 3.2 Gen2 (10Gbps) for rapid data transfer.
  • SD & TF Card Reader: Supports SD3.0 with speeds up to 170MB/s, allowing simultaneous reading and writing of two cards.
  • 3.5mm Audio Port: Combined input/output for headphones or microphones.
  • Integrated Design: Curved design ensures it doesn't block Mac Mini cooling vents. Features a groove for easy access to the Mac Mini's power button.
  • Triple Security Protection: Built-in surge protection, timing control, and overcurrent protection for device safety.
Detailed view of the docking station's ports including USB-A, SD/TF, 3.5mm audio, DisplayPort, and USB-C host cable.

Figure 2: Overview of the docking station's ports and features.

3. Specifications

AttributeValue
Brand NameUGREEN
Model NumberCM841
Compatible PC DevicesMac Mini M4/M4 Pro
Compatible SystemsMacOS
SSD/HDD SlotM.2 NVMe (Supports 2230/2242/2260/2280 sizes, expand 8TB Max.)
Interface TypeUSB 3.2 GEN 2
StandardUSB 3.2 Gen2
Ports10
FunctionsCard Reader, DP, USB-A, USB-C
DisplayPort OutputUp to 4K@240Hz (Mac Mini M4 Pro), 4K@144Hz (Mac Mini M4)
USB-A Ports4x USB3.2 Gen2, 10Gbps
USB-C Ports2x USB3.2 Gen2, 10Gbps
3.5mm PortIn&Out Combo
SD&TF Card Reader SlotsSD3.0, 170MB/s, support 2 cards simultaneously
USB-C Host Cable Length4cm
Dimensions (L x W x H)127 x 127 x 29 mm
CertificationCE, FCC
PackageYes (Stylish Color Box)
Product Specifications diagram showing dimensions and port details.

Figure 3: Product Specifications and dimensions.

4. Setup Instructions

4.1 Connecting the Docking Station to Mac Mini

  1. Place your Mac Mini M4/M4 Pro securely on top of the UGREEN Docking Station. The docking station is designed to fit perfectly underneath your Mac Mini.
  2. Connect the integrated 4cm USB-C host cable from the docking station to an available USB-C port on your Mac Mini. This cable provides power and data connectivity for all the dock's functions.
  3. Ensure the Mac Mini's power button is accessible through the groove on the docking station.
Image showing the docking station's groove design for easy Mac Mini power button access.

Figure 4: Docking station with groove design for Mac Mini power button access.

4.2 M.2 NVMe SSD Installation

To expand your storage, follow these steps to install an M.2 NVMe SSD:

  1. Disconnect: Ensure the docking station is disconnected from your Mac Mini and any external devices.
  2. Access: Flip the product so the bottom faces up. Loosen the screws on the bottom panel and carefully remove it.
  3. Prepare SSD Slot: Locate the M.2 SSD slot. If there are screws holding down the SSD retention mechanism, loosen them.
  4. Insert SSD: Gently insert your M.2 NVMe SSD (2230/2242/2260/2280 size) into the M.2 slot at an angle. Once seated, push down the other end and secure it with the provided screw.
  5. Reassemble: Reattach the bottom panel and tighten its screws.
  6. Connect: Connect the docking station to your Mac Mini. The newly installed drive should appear on your computer.
Step-by-step instructions for installing an M.2 NVMe SSD into the docking station.

Figure 5: Hard Disk Installation Steps.

5. Operating Instructions

5.1 Using USB Ports (USB-A & USB-C)

The docking station provides 4x USB-A and 2x USB-C ports, all supporting USB 3.2 Gen2 with 10Gbps data transfer speeds. Simply plug your USB devices (external drives, keyboards, mice, etc.) into the corresponding ports.

Illustration of 10Gbps fast data transfer with the dock connected to a monitor and external SSD.

Figure 6: High-speed data transfer via USB ports.

5.2 DisplayPort (DP) Output

Connect an external monitor to the DisplayPort on the docking station using a compatible DP cable. The dock supports:

  • Up to 4K@240Hz for Mac Mini M4 Pro.
  • Up to 4K@144Hz for Mac Mini M4.
  • Backward compatible with 4K@144/120/60Hz, 2K@240/144/120/60Hz, 1080P@240/120/60Hz, 720P, 480P, etc.

Note: For 4K@240Hz, ensure your Mac Mini M4 Pro, monitor, and DP cable all support this resolution and refresh rate.

User working with a Mac Mini and monitor connected via the docking station, illustrating 4K@240Hz display capability.

Figure 7: High-resolution display output via DisplayPort.

5.3 Dual Monitor Setup

You can set up a dual monitor display using the docking station:

  1. Connect your first monitor to the DisplayPort on the docking station.
  2. Connect your second monitor directly to the HDMI port on your Mac Mini.

Note: The Mac Mini M4 Pro supports 4K@240Hz via the dock's DP port, while the Mac Mini M4 delivers 4K@144Hz via the DP port.

Dual monitor setup with one monitor connected to the dock's DP port and the second to the Mac Mini's HDMI port.

Figure 8: Dual monitor display configuration.

5.4 SD & TF Card Reader

Insert your SD or TF cards into the respective slots. The card reader supports SD3.0 and allows simultaneous reading and writing of both cards at speeds up to 170MB/s.

5.5 3.5mm Audio Port

Plug in your headphones or microphone into the 3.5mm In&Out Combo port for audio input and output.

6. Maintenance

  • Keep the docking station clean and free from dust. Use a soft, dry cloth for cleaning.
  • Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
  • Do not attempt to disassemble or repair the device yourself, as this may void the warranty and cause damage.
  • Ensure proper ventilation around the device to prevent overheating. The curved design helps with Mac Mini cooling, but avoid blocking any vents.

7. Troubleshooting

  • Device Not Recognized: Ensure the USB-C host cable is securely connected to both the docking station and your Mac Mini. Try connecting to a different USB-C port on your Mac Mini if available.
  • SSD Not Appearing: Double-check the M.2 NVMe SSD installation steps. Ensure the SSD is properly seated and secured. Verify that the SSD itself is functional.
  • Display Issues: Ensure your monitor is correctly connected to the DisplayPort. Check the display settings on your Mac Mini. Verify that your DP cable supports the desired resolution and refresh rate. If using dual monitors, ensure both are connected as described in section 5.3.
  • Slow Data Transfer: Ensure you are using compatible USB 3.2 Gen2 devices and cables to achieve 10Gbps speeds. Older USB standards will result in slower transfers.
  • Card Reader Not Working: Ensure the SD/TF card is inserted correctly and is not damaged. Try a different card to rule out card issues.

8. User Tips

  • SSD Compatibility: This dock supports M.2 NVMe SSDs. Ensure your SSD is NVMe (PCIe) and not SATA for optimal performance and compatibility. Thermal paste is generally not required for M.2 SSDs in external enclosures unless specified by the SSD manufacturer, but ensuring good airflow is always beneficial.
  • Host Cable: The short, integrated USB-C host cable is designed for a clean setup with the Mac Mini. Ensure it's firmly connected to the Mac Mini's USB-C port for all functions to work correctly.
  • PC Compatibility: While designed for Mac Mini M4/M4 Pro, some users might inquire about PC compatibility. The dock's integrated design is specific to the Mac Mini form factor. While the individual ports (USB, DP, Card Reader) might function with other USB-C enabled devices, the physical fit and full feature set are optimized for the Mac Mini.

9. Warranty and Support

UGREEN products come with a standard warranty. For detailed warranty information, technical support, or service inquiries, please refer to the official UGREEN website or contact their customer support directly. Please retain your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.