DIVEDEER Ultra-thin Window Cleaning Robot

Introduction

Thank you for choosing the DIVEDEER Ultra-thin Window Cleaning Robot. This intelligent device is designed to simplify window cleaning with its advanced features, including double water jet spray, intelligent planning, ultrasonic atomization, and powerful suction. Please read this manual thoroughly before operating the robot to ensure safe and efficient use.

Important Safety Information

• **Continuous Power Connection:** This product requires a continuous power source to function properly. It is not designed to operate solely on battery power after charging.
• **Initial Charging:** Before first use, charge the robot for at least 2 hours. The internal battery serves as a backup to prevent the robot from falling immediately in case of a sudden power outage.
• **Fall Prevention:** The robot is designed with mechanisms to prevent falling. Ensure it is securely attached to the glass surface before operation.
• Do not use the robot on cracked or damaged glass surfaces.
• Keep hands, hair, and loose clothing away from moving parts during operation.
• Ensure the power cord is not tangled or obstructing the robot's movement.

Package Contents

Please check the package for the following items:

• DIVEDEER Window Cleaning Robot (RA2-02)
• Remote Control
• Power Adapter and Cable
• Cleaning Cloths (6 pieces)
• User Manual

Image: The DIVEDEER Window Cleaning Robot, highlighting its ultra-thin body, 2800PA suction, wet and dry wiping capability, and inclusion of 6 cleaning cloths.

Technical Specifications

Setup Instructions

1. **Charge the Robot:** Before initial use, connect the robot to the power adapter and charge for a minimum of 2 hours. This charges the internal backup battery.
2. **Attach Cleaning Cloths:** Securely attach the provided cleaning cloths to the designated areas on the robot.
3. **Fill Water Tank:** Open the water tank cap and fill it with an appropriate window cleaning solution or distilled water. The robot features a 50ml large-capacity water tank.
4. **Connect to Power:** Plug the power adapter into a wall outlet and connect it to the robot. Ensure the robot remains connected to the power source during operation.
5. **Place on Surface:** Place the robot firmly on the window or desired cleaning surface. Ensure good contact for optimal suction.

Operating Instructions

The DIVEDEER Window Cleaning Robot offers multiple modes of operation for versatile cleaning.

1. **Activate Side Button:** Locate and activate the power switch on the side of the robot.
2. **One-Button Start:** Press the main power button on the robot to initiate cleaning. The robot will begin its intelligent cleaning path.
3. **Remote Control Operation:** Use the provided remote control for manual navigation and to select specific cleaning modes or spray functions.

Image: Diagram illustrating the three modes of operation: activating the side button, pressing the one-button start, and using the remote control.

Water Spray Functionality

The robot features a double-head water spray system with ultrasonic atomization. Please note the specific operation:

• When the robot is moving to the left, only the water tank on the left side will spray water.
• When the robot is moving to the right, only the water tank on the right side will spray water.
• It is not possible for both sides to spray water simultaneously.

Image: The robot in action, showing its fully automatic double spray capability.

Intelligent Navigation

The robot utilizes intelligent planning and smart navigation to cover the cleaning surface efficiently. It is equipped with high-precision sensors to detect edges and obstacles.

Image: Illustration of the robot's smart navigation path on a window.

Applicable Cleaning Surfaces

This robot is suitable for a variety of surfaces, including:

• Single, double, and multiple glazing windows
• Marble tile walls
• Kitchen and bathroom glass
• Glass surfaces with or without borders
• High/low floor exterior windows
• Mirrors

Image: The robot demonstrated cleaning various surfaces including different types of windows, marble tiles, and mirrors.

Maintenance

• **Cleaning Cloths:** After each use, remove and wash the cleaning cloths. They are reusable.
• **Water Tank:** Empty any remaining solution from the water tank and rinse it. Refill with fresh solution or water before next use.
• **Robot Body:** Wipe the robot's body with a soft, dry cloth to remove any dust or residue.
• **Sensors:** Periodically clean the high-precision sensors to ensure optimal navigation and edge detection.

Troubleshooting

Robot is not spraying water:

Check if the water tank is filled. Ensure the robot is moving in the direction corresponding to the spray nozzle (left spray for left movement, right spray for right movement).

Robot falls or loses suction:

Ensure the robot is continuously connected to a power source during operation. The internal battery is for backup during power outages, not for primary operation. Verify the cleaning surface is clean and dry before placing the robot.

Robot is not moving or responding:

Check if the side power button is activated and the main power button has been pressed. Ensure the remote control batteries are functional if using remote operation. Verify the power cable is securely connected.

User Tips

• **Understand Water Spray:** Remember that the robot's double water jet sprays bilaterally, meaning only one side sprays at a time depending on the robot's direction of movement (left spray for left movement, right spray for right movement).
• **Always Keep Plugged In:** For continuous and safe operation, always keep the robot connected to its power source. The internal battery is a safety feature for power interruptions, not a primary power source for cleaning.
• **Initial Charge is Key:** A full initial charge (2+ hours) ensures the backup battery is ready to prevent falls if power is temporarily lost during cleaning.
• **Optimal Cleaning Solution:** Use a suitable window cleaning solution or distilled water in the 50ml tank for best results and to prevent nozzle clogging.

Warranty and Support

The DIVEDEER Window Cleaning Robot comes with a 2-year warranty, as indicated by the seller. For any damage, quality issues, or after-sales support, please contact customer service.

When contacting support, please provide your order number and a complete unboxing video if reporting damage or quality issues. This will help expedite the resolution process.

Support Email: cutelin9@qq.com