ONESPORT OT07 Electric Bike User Manual

1. Introduction

Welcome to the ONESPORT OT07 Electric Bike user manual. This guide provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new e-bike. Please read this manual thoroughly before your first ride to ensure optimal performance and safety.

Image: ONESPORT OT07 Electric Bike (White model)

2. Important Safety Warnings

⚠️ Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.

• Always wear a helmet and appropriate safety gear when riding.
• Familiarize yourself with local traffic laws and regulations for electric bicycles.
• Perform a pre-ride safety check before each use, including brakes, tires, and battery level.
• Do not operate the e-bike under the influence of alcohol or drugs.
• Avoid riding in adverse weather conditions or on slippery surfaces.
• Ensure the battery is charged in a well-ventilated area, away from flammable materials.
• Do not modify the e-bike's electrical system or components.

3. Package Contents

Your ONESPORT OT07 Electric Bike package should include the following items:

• ONESPORT OT07 Electric Bike (partially assembled)
• 36V 10.4Ah Lithium Battery (integrated)
• Battery Charger
• User Manual (this document)
• Assembly Tools (basic tools for final assembly)
• Pedals
• Front and Rear Fenders
• Rear Rack
• Headlight and Tail Lamp

Please inspect all components upon receipt. If any items are missing or damaged, contact customer support immediately.

4. Setup and Initial Assembly

Your ONESPORT OT07 Electric Bike comes mostly assembled. Follow these steps for final assembly and initial setup:

1. **Unpacking:** Carefully remove the bike and all components from the packaging. Retain packaging for future transport or storage.
2. **Handlebar Installation:** Attach the handlebar to the stem, ensuring it is centered and tightened securely. Adjust the angle for comfortable riding.
3. **Pedal Installation:** Identify the left (L) and right (R) pedals. The left pedal tightens counter-clockwise, and the right pedal tightens clockwise. Apply a small amount of grease to the threads before installation.
4. **Seat Post Installation:** Insert the seat post into the frame and adjust the height for a comfortable riding position. Secure with the quick-release lever or bolt.
5. **Fender and Rack Installation:** Attach the front and rear fenders, and the rear rack, using the provided hardware. Ensure they are securely fastened and do not interfere with wheel rotation.
6. **Tire Inflation:** Inflate both tires to the recommended pressure indicated on the tire sidewall.
7. **Brake Check:** Verify that both hydraulic disc brakes are functioning correctly. Squeeze the brake levers to ensure they engage firmly and release smoothly. Adjust if necessary.
8. **Battery Charging:** Before your first ride, fully charge the 36V 10.4Ah lithium battery. The charging time is typically 6-8 hours. Connect the charger to the bike's charging port and then to a power outlet. The indicator light on the charger will change when fully charged.
9. **Display Activation:** Power on the BAFANG TFT Meter display. Familiarize yourself with its functions and settings.

Image: All-Aluminum Alloy Frame with hidden internal wiring, showing the integrated battery compartment.

5. Operating Instructions

5.1 Powering On/Off

• To power on the e-bike, press and hold the power button on the BAFANG TFT Meter display.
• To power off, press and hold the power button again.

5.2 BAFANG TFT Meter Display

The BAFANG TFT Meter provides clear display of essential riding information. It is waterproof and dustproof.

Image: BAFANG TFT Meter display showing speed and trip distance.

• **Information Displayed:** Speed (current, max, average), trip distance, total distance, battery level, pedal assist level, error codes.
• **Navigation:** Use the buttons on the display unit to cycle through different information screens and adjust settings.

5.3 Pedal Assist System (PAS)

The OT07 features a BAFANG M200 Mid-Drive Motor with a torque sensor for precise assistance. The PAS system provides power assistance as you pedal.

Image: Close-up of the BAFANG M200 Mid-Drive Motor (250W 65NM).

• **Activating PAS:** Once the bike is powered on, you can select your desired assist level using the display controls.
• **Torque Sensor:** The torque sensor detects your pedaling effort and provides proportional assistance, making the ride feel natural and comfortable.
• **Assist Levels:** Choose from multiple assist levels (e.g., Eco, Tour, Sport, Turbo) to match your riding conditions and desired effort.

5.4 Gear Shifting

The e-bike is equipped with a SHIMANO 7-speed gear system.

• Use the shifter on the handlebar to change gears.
• Shift to lower gears for easier pedaling on inclines and higher gears for faster speeds on flat terrain.
• Always ease off the pedals slightly when shifting to ensure smooth transitions.

5.5 Braking

The OT07 features hydraulic disc brakes for reliable stopping power.

Image: Close-up of the 160mm hydraulic disc brake rotor and caliper.

• Apply both front and rear brakes simultaneously for balanced and effective stopping.
• Avoid sudden, hard braking, especially at high speeds or on loose surfaces.
• Regularly check brake pads for wear and replace them when necessary.

6. Maintenance

6.1 Battery Care

Image: Diagram showing the integrated 36V 10.4Ah battery within the frame.

• Charge the battery regularly, even if not in use, to maintain its health.
• Avoid completely draining the battery before recharging.
• Store the battery in a cool, dry place, away from direct sunlight and extreme temperatures.
• Do not expose the battery to water or moisture.

6.2 Tire Maintenance

• Check tire pressure before each ride and inflate to the recommended PSI.
• Inspect tires for wear, cuts, or punctures regularly.
• The e-bike uses 700*45C pneumatic tires.

6.3 Brake System

• Regularly check the hydraulic disc brakes for proper function and responsiveness.
• Inspect brake pads for wear and replace them when they are thin.
• Ensure brake levers are firm and do not feel spongy.

6.4 General Cleaning

• Clean the e-bike with a damp cloth and mild soap. Avoid using high-pressure washers directly on electrical components.
• Lubricate the chain regularly to ensure smooth operation and prevent rust.
• Check all bolts and fasteners periodically and tighten if necessary.

7. Troubleshooting

Here are some common issues and their potential solutions:

• **E-bike does not power on:**
  • Check if the battery is properly seated and charged.
  • Ensure the power button on the display is pressed correctly.
• **Motor not providing assistance:**
  • Verify the battery has sufficient charge.
  • Check the pedal assist level on the display; increase it if it's too low.
  • Ensure you are pedaling, as the torque sensor requires pedal input.
• **Brakes feel weak or spongy:**
  • Inspect brake pads for wear and replace if needed.
  • Check for air in the hydraulic lines (may require professional bleeding).
  • Ensure brake calipers are properly aligned.
• **Unusual noises during riding:**
  • Check for loose components, especially on the wheels, fenders, or rack.
  • Inspect the chain for proper lubrication and tension.
  • If the noise persists, consult a professional bike mechanic.

For complex issues, it is recommended to contact customer support or a certified e-bike technician.

8. Specifications

Image: Detailed product parameter table.

8.1 Dimensions

Image: Diagram illustrating the dimensions of the ONESPORT OT07 Electric Bike.

• Overall Length: 1900 mm
• Overall Height: 1050 mm
• Handlebar Height: 910 mm - 1020 mm (adjustable)
• Seat Height: 790 mm - 910 mm (adjustable)
• Ground Clearance: Approximately 260 mm

9. User Tips

• **Regular Checks:** Make it a habit to quickly check tire pressure, brake function, and battery level before every ride.
• **Battery Longevity:** For best battery life, avoid storing the bike in extreme heat or cold, and try to keep the battery charge between 20% and 80% when not in use for extended periods.
• **Smooth Riding:** Utilize the torque sensor by pedaling smoothly. This will provide a more natural feel and optimize battery usage.
• **Gear and Assist Coordination:** Use the gears in conjunction with the pedal assist levels. Downshift for hills and increase assist, then upshift and reduce assist on flats for efficient riding.
• **Security:** Always secure your e-bike with a robust lock when unattended, even for short periods.

10. Warranty and Support

For warranty information, please refer to the documentation provided at the time of purchase or contact your seller directly. Keep your proof of purchase for any warranty claims.

For technical support, spare parts, or service inquiries, please contact the ONESPORT customer service department or your authorized dealer. Provide your model number (OT07) and purchase date when seeking assistance.