Introduction
This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your JIECANG JC35VT Remote Control Hidden Up Down Motorized TV Lift Mechanism. This product is designed to discreetly store and reveal televisions ranging from 25 to 60 inches, offering a sophisticated solution for modern living spaces.
Please read this manual thoroughly before installation and operation to ensure proper use and to prevent damage to the unit or injury.
Safety Information
- Ensure all electrical connections are made by a qualified professional and comply with local electrical codes.
- Do not exceed the maximum load capacity of 600N (approximately 60kg or 132 lbs). Refer to the specifications for detailed weight limits.
- Keep hands and loose clothing clear of the lift mechanism during operation to prevent pinching or entanglement.
- Do not allow children to operate the TV lift or play near it.
- Operate the lift within the specified ambient temperature range of +5℃ to +40℃.
- Disconnect power before performing any maintenance or cleaning.
- The product has an IP20 protection rating, meaning it is protected against solid objects over 12.5mm, but has no protection against liquids. Avoid exposure to water or excessive moisture.
Package Contents
Upon unpacking, please verify that all components are present and undamaged. The package typically includes:
- JIECANG JC35VT Motorized TV Lift Mechanism
- Remote Control
- Mounting Hardware (screws, bolts, etc. - specific types and quantities may vary)
- Power Adapter/Cable
- Instruction Manual (this document)
Specifications
| Feature | JC35VT-650 | JC35VT-1000 |
|---|---|---|
| Brand Name | JIECANG | |
| Model Number | JC35VT | |
| DIY Supplies | Electrical | |
| Screen Size Compatibility | 25" - 60" | |
| Maximum Pull (N) | 600 | |
| Self-lock (N) | 700 | |
| Input Voltage (VDC) | 110-240 | |
| Load Speed (mm/s) | 25 | |
| Lowest Point Height (mm) | 570 | 810 |
| Highest Point Height (mm) | 1220 | 1810 |
| Adjustable Height Range (mm) | 650 | 1000 |
| Use Frequency | 10%, continuous work for up to 2 minutes | |
| Protection (IP Grade) | IP 20 | |
| Operating Environment | +5℃ ~ +40℃ | |
| Certification Standard | CE/UL | |
| Packing Size (mm) | 670*310*250 | 900*310*235 |
| Weight (kg) | 16.5 | 21 |
Setup and Installation
Installation of the JIECANG JC35VT TV lift requires careful planning and execution. It is recommended that installation be performed by two people due to the weight and size of the unit and the television.
1. Planning and Placement
Determine the desired location for your TV lift. Ensure there is sufficient space within your cabinet or furniture for the lift mechanism and the TV in both its retracted and extended positions. Consider cable management and power access.
Figure 1: Example of the JIECANG JC35VT TV lift integrated into furniture.
2. Mounting the Lift Mechanism
The lift mechanism must be securely mounted to a stable, level surface within your furniture. Use the provided mounting hardware and refer to the detailed dimension diagrams for precise measurements and hole placement.
Figure 2: Technical dimensions for JC35VT-650 (top) and JC35VT-1000 (bottom) models. This diagram shows overall height, adjustable height range, base dimensions (180x180mm), and TV bracket mounting hole patterns. For JC35VT-650, highest point is 1220mm, lowest is 570mm. For JC35VT-1000, highest point is 1810mm, lowest is 810mm. Both models feature a 141mm width for the main column and 27mm depth for the TV bracket.
Key dimensions from Figure 2:
- Base Footprint: 180mm x 180mm for both models.
- Column Width: 141mm.
- TV Bracket Depth: 27mm.
- JC35VT-650:
- Lowest Point Height: 570mm
- Highest Point Height: 1220mm
- Adjustable Height: 650mm (1220mm - 570mm)
- TV Bracket Mounting Holes: 465mm width, 430mm height (max)
- JC35VT-1000:
- Lowest Point Height: 810mm
- Highest Point Height: 1810mm
- Adjustable Height: 1000mm (1810mm - 810mm)
- TV Bracket Mounting Holes: 695mm width, 424mm height (max)
Ensure the mounting surface can support the combined weight of the lift mechanism and your television.
3. Attaching the TV
Carefully attach your television to the TV mounting bracket on the lift mechanism using appropriate VESA-compatible screws. Ensure the TV is centered and securely fastened. Refer to your TV's manual for specific VESA mounting patterns and screw requirements.
Figure 3: The TV lift mechanism in its fully extended position, ready for TV mounting.
4. Wiring and Power Connection
Connect the power cable to the lift mechanism and then to a suitable power outlet (110-240 VDC). Route all cables neatly to prevent interference with the lift's movement. Ensure cables are not pinched or stretched during operation.
Operation
The JIECANG JC35VT TV lift is operated using the provided remote control.
- Extend TV: Press the "UP" button on the remote control to raise the TV to its extended position.
- Retract TV: Press the "DOWN" button on the remote control to lower the TV into its hidden position.
- Stop Movement: Press any button (or a dedicated "STOP" button if present) to halt the lift at any desired height.
The lift is designed for intermittent use, with a recommended use frequency of 10% (e.g., 2 minutes of continuous operation followed by 18 minutes of rest) to ensure longevity.
Maintenance
Regular maintenance helps ensure the smooth and reliable operation of your TV lift.
- Cleaning: Wipe the exterior surfaces of the lift mechanism with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Inspection: Periodically check all mounting screws and connections to ensure they are tight and secure.
- Cable Management: Verify that all cables are free from obstruction and are not being pinched or damaged by the lift's movement.
- Lubrication: The internal components are generally maintenance-free. Do not attempt to lubricate internal parts unless specifically instructed by the manufacturer.
Troubleshooting
If you encounter issues with your JIECANG JC35VT TV lift, refer to the following common problems and solutions:
- Lift does not move:
- Check if the power cable is securely connected to both the lift and the power outlet.
- Ensure the power outlet is functional.
- Verify that the remote control batteries are not depleted.
- If the lift has been operated continuously for an extended period, it may have entered a thermal protection mode. Allow it to cool down for 20-30 minutes before attempting operation again.
- Lift moves erratically or makes unusual noises:
- Inspect for any obstructions in the path of the lift mechanism.
- Check if the TV is securely mounted and balanced.
- Ensure all mounting hardware is tight.
- If the issue persists, discontinue use and contact customer support.
- Remote control not responding:
- Replace the batteries in the remote control.
- Ensure there are no obstructions between the remote and the lift's receiver.
User Tips
- Always double-check the weight of your television against the lift's maximum load capacity to ensure safe operation and prevent damage.
- When designing custom cabinetry for the lift, ensure adequate ventilation to prevent overheating, especially if the TV is enclosed for extended periods.
- Consider installing a master power switch for the entire entertainment system, including the TV lift, for convenience and energy saving.
Warranty and Support
For warranty information, technical support, or any questions not covered in this manual, please contact the manufacturer directly.
Contact Information:
- WhatsApp: +86 15580043427
- Email: 2589659452@qq.com
Please have your model number (JC35VT) and any relevant purchase information ready when contacting support.
