Estardyn 1.3 inch OLED Module / EC11 Encoder

Contents

Estardyn 1.3 inch OLED Module with EC11 Rotary Encoder User Manual

Model: 1.3 inch OLED Module / EC11 Encoder

Brand: Estardyn

1. Introduction

This manual provides detailed instructions for the Estardyn 1.3 inch OLED Module integrated with an EC11 Rotary Encoder. This compact and versatile module is designed for various DIY electronics projects, particularly with microcontrollers like Arduino. It combines a high-definition OLED display with a rotary encoder and independent push buttons for intuitive user interaction.

Estardyn 1.3 inch OLED Module with EC11 Encoder (White Display variant)
Figure 1: Estardyn 1.3 inch OLED Module with EC11 Encoder (White Display variant)

The module features an OLED IIC interface and an EC11 rotary encoder, both integrated onto a single board. This design offers a concise, beautiful, and convenient solution for DIY enthusiasts. It includes an additional return and confirmation button, with independent button interfaces, allowing flexibility in usage based on project requirements.

2. Specifications

2.1. Product Parameters

  • Display Type: 1.3 inch OLED screen
  • Display Color: Available in White or Blue
  • Encoder Type: EC11 Rotary Encoder
  • OLED Driver Chip: SSD1306
  • OLED Interface: I2C (IIC)
  • Resolution: 128x64 pixels
  • EC11 Encoder Details: Plum-blossom-handle, 15mm handle length, 20 pulses per rotation, 20 positioning points, integrated switch on pin 5.
  • Customization: Yes (is_customized)
  • High-concerned chemical: None

2.2. Product Dimensions

The module has the following approximate dimensions:

Measurement Value (mm)
Overall Length 64.90
Overall Width 35.05
Screen Length 27.64
Screen Width 17.60
Mounting Holes 4 x M3-sized holes
Detailed product dimensions and interface description
Figure 2: Product parameters, introduction, dimensions, and interface description.

3. Package Contents

The standard package includes:

  • 1x Estardyn 1.3 inch OLED Module with EC11 Rotary Encoder
  • 1x Pin Header Strip (for connections)

4. Setup and Connection

This section details the pinout and recommended circuit connections for integrating the OLED module and EC11 encoder into your project.

4.1. Interface Pin Description

The module features a set of pins for power, I2C communication, and encoder/button inputs. Refer to the pinout diagram below and the following descriptions:

Rear view of the Estardyn 1.3 inch OLED Module, showing pin labels for connection
Figure 3: Rear view with pin labels.
Pin Label Description
VCC 3.3V Power Supply Positive
GND Power Ground
SDA Data Interface for OLED screen's I2C communication
SCL Clock Interface for OLED screen's I2C communication
TRA Phase A of EC11 Rotary Encoder
TRB Phase B of EC11 Rotary Encoder
PSH Key Interface of EC11 Rotary Encoder (Push Button)
BAK (KEY0) Return Key Button Interface
CON (KEY1) Confirm Button Interface

4.2. Circuit Connection Diagrams

The following diagrams illustrate the recommended wiring for the EC11 Rotary Encoder, the OLED display, and the additional buttons. These diagrams are crucial for proper functionality and should be followed carefully.

Circuit connection diagrams for the EC11 Rotary Encoder, OLED display, and button interfaces
Figure 4: EC11 Rotary Encoder, OLED, and Button Circuit Diagrams.

EC11 Rotary Encoder Circuit: Connect TRIM_A, TRIM_B, and PUSH pins to your microcontroller's digital input pins. Ensure pull-up resistors (e.g., 10kΩ) are used for stable readings, as shown in the diagram. Capacitors (e.g., 100nF) are recommended for debouncing.

OLED Schematic Diagram: Connect OLED_SCL and OLED_SDA to your microcontroller's I2C pins. VCC and GND should be connected to the 3.3V power supply and ground, respectively. The OLED_RST pin can be connected to a digital pin for software reset or directly to VCC if not needed.

BAK (KEY0) and CON (KEY1) Circuit Diagram: Connect KEY0 and KEY1 to digital input pins on your microcontroller. Use pull-up resistors (e.g., 10kΩ) and debouncing capacitors (e.g., 100nF) for reliable button presses.

5. Operation

The module provides both visual output via the OLED display and user input via the rotary encoder and buttons. Programming is required to utilize these features with a microcontroller.

5.1. OLED Display Operation

The 1.3 inch OLED display uses the SSD1306 driver chip and communicates via the I2C protocol. To display information, you will need to use an appropriate library for your microcontroller (e.g., Adafruit SSD1306 library for Arduino). Basic steps include:

  1. Initialize the I2C communication.
  2. Initialize the SSD1306 display with its I2C address (commonly 0x3C or 0x3D).
  3. Use library functions to draw text, shapes, or bitmaps on the display buffer.
  4. Call the display function to update the physical screen.

5.2. EC11 Rotary Encoder Operation

The EC11 rotary encoder provides rotational input and a push-button input. It has two phases (TRA, TRB) that generate pulses out of phase, allowing detection of rotation direction and speed. The PSH pin acts as a push button.

  1. Connect TRA, TRB, and PSH to digital input pins on your microcontroller.
  2. Implement interrupt-driven routines or polling to detect changes on TRA and TRB for rotation.
  3. Detect presses on the PSH pin for the encoder's integrated button.

5.3. Independent Button Operation (BAK, CON)

The BAK (Return) and CON (Confirm) buttons provide additional input options. These are simple momentary push buttons.

  1. Connect BAK (KEY0) and CON (KEY1) to digital input pins on your microcontroller.
  2. Read the state of these pins to detect button presses.
  3. Consider implementing software debouncing for reliable input.

6. Maintenance

The Estardyn OLED module is a robust electronic component, but proper care ensures its longevity and performance.

  • Cleaning: Use a soft, dry, anti-static cloth to gently clean the display surface. Avoid abrasive materials or harsh chemicals.
  • Storage: Store the module in a dry, cool environment, away from direct sunlight and extreme temperatures.
  • Handling: Avoid touching the OLED display surface directly with bare hands to prevent smudges or damage. Handle the module by its edges.
  • Power Supply: Ensure the power supply voltage is within the specified 3.3V range. Over-voltage can permanently damage the module.
  • Static Electricity: Take precautions against electrostatic discharge (ESD) when handling the module, as electronic components are sensitive to static.

7. Troubleshooting

If you encounter issues with your Estardyn OLED module, refer to the following common problems and solutions:

Problem: Display is blank or shows garbage.
  • Check Wiring: Verify that VCC, GND, SDA, and SCL pins are correctly connected to your microcontroller and power supply.
  • Power Supply: Ensure the module is receiving a stable 3.3V power supply.
  • I2C Address: Confirm the correct I2C address (0x3C or 0x3D) is used in your code.
  • Library Initialization: Make sure the OLED library is correctly initialized in your code.
  • Reset Pin: If using the OLED_RST pin, ensure it's correctly toggled during initialization.
Problem: Rotary encoder does not respond or gives erratic readings.
  • Wiring: Check connections for TRA, TRB, and PSH pins.
  • Pull-up Resistors: Ensure external or internal pull-up resistors are enabled for the encoder pins.
  • Debouncing: Implement software or hardware debouncing for the encoder signals to prevent false readings.
  • Code Logic: Review your code for correct handling of encoder phase changes.
Problem: Buttons (BAK, CON, PSH) do not register presses.
  • Wiring: Verify connections for the respective button pins.
  • Pull-up Resistors: Ensure pull-up resistors are correctly configured for the button pins.
  • Debouncing: Apply debouncing techniques in your code to handle button bounce.
  • Code Logic: Check if your code is correctly reading the digital input state of the button pins.

8. User Tips

Based on common usage and feedback, here are some tips for getting the most out of your module:

  • Arduino Libraries: For Arduino users, consider using the "Adafruit SSD1306" library for the OLED display and a dedicated rotary encoder library (e.g., "RotaryEncoder" by Matthias Hertel) for easier implementation.
  • Power Consumption: OLED displays can consume significant power, especially when displaying many lit pixels. Consider dimming the display or turning it off when not in use for battery-powered projects.
  • Customization: The "is_customized: Yes" specification suggests flexibility. Explore advanced programming techniques to create custom menus, animations, and user interfaces tailored to your project.
  • Mounting: Utilize the four M3-sized mounting holes for secure integration into your project enclosure.

9. Warranty and Support

For technical support, troubleshooting assistance, or warranty inquiries, please contact Estardyn Official Store directly through the platform where the product was purchased. Provide your order details and a clear description of the issue to facilitate a quicker resolution.

This product is designed for DIY and hobbyist use. While efforts are made to ensure quality, the manufacturer is not responsible for damages caused by improper installation, modification, or misuse of the module.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.