SKMEI 2120

Contents

SKMEI 2120 Sport Watch User Manual

Model: 2120 | Brand: SKMEI

Introduction

Thank you for choosing the SKMEI 2120 Sport Watch. This manual provides detailed instructions on how to set up, operate, and maintain your watch. Please read this manual carefully to ensure proper use and to enjoy all the features your new watch has to offer.

Features

  • 6-digit LCD display for digital time.
  • Analog-Digital display type.
  • Displays hour, minute, second, month, day, and week.
  • Daily alarm and hourly chime function.
  • Stopwatch function with a measurement range of 29 minutes and 59.99 seconds.
  • Dual time function with independent 12/24H format.
  • EL (Electroluminescent) backlight for low-light conditions.
  • Key-tone feedback for button presses.
  • Shock Resistant design.
  • Water Resistance Depth: 3 Bar (30 meters).

Specifications

Product Parameter Diagram

Figure 1: Product dimensions and basic information.

Attribute Value
Brand NameSKMEI
Model Number2120
MovementDigital
Display TypeAnalog-Digital
Case MaterialAlloy (Zinc alloy)
Band Material TypeStainless Steel
Dial Window Material TypeGlass
Clasp TypeBracelet Clasp
Water Resistance Depth3 Bar (30M)
Case ShapeRound
Case Thickness9.4mm
Dial Diameter41.5mm
Band Width17.8mm
Band Length21cm
Watch Weight78.4g
Battery IncludedYes (LR1130)
CertificationCE

Setup Instructions

The SKMEI 2120 watch features three buttons: MODE/ADJUST (A Key), SET/LIGHT (B Key), and ADJUST (C Key). These buttons are used to navigate modes and adjust settings.

Watch Buttons Diagram

Figure 2: Watch button layout and functions.

General Operation Notes:

  • In any mode, press the B Key to light up the EL backlight for 3 seconds.
  • To set the analog watch hands: In any mode, short press the C Key to move the hand one step. Hold down the C Key to move it fast.
  • At any setting state, if there is no key operation within one minute, the setting state will exit automatically.

1. Time Mode Setting

Time Mode Setting Diagram

Figure 3: Sequence for setting time.

  1. In Time Mode, hold down the B Key for 1.5 seconds to enter the time setting state. The "second" display will flash.
  2. Press the B Key repeatedly to cycle through the setting items: Second → Hour → Minute → 12/24H format.
  3. Press the A Key to adjust the flashing item. Hold down the A Key to adjust it quickly.
  4. Second Setting Note: If the second count is between 30-59, pressing the A Key will reset it to zero and increase the minute by one. If the second count is between 0-29, it will reset to zero without changing the minute.
  5. After setting, press the B Key to exit the setting state.

2. Date Mode Setting

Date Mode Setting Diagram

Figure 4: Sequence for setting date.

  1. In Date Mode, hold down the B Key for 1.5 seconds to enter the date setting state. The "month" display will flash.
  2. Press the B Key repeatedly to cycle through the setting items: Month → Day → Week.
  3. Press the A Key to adjust the flashing item. Hold down the A Key to adjust it quickly.
  4. After setting, press the B Key to exit the setting state.

3. Alarm Mode Setting

Alarm Mode Setting Diagram

Figure 5: Sequence for setting alarm.

  1. In Alarm Mode, hold down the B Key for 1.5 seconds to enter the alarm setting state. The "second" display will flash.
  2. Press the B Key repeatedly to cycle through the setting items: Hour → Ten Digits in Minutes → Unit Digits in Minutes → Alarm/Chime ON/OFF.
  3. Press the A Key to adjust the flashing item. Hold down the A Key to adjust it quickly.
  4. To turn the alarm ON/OFF: When the alarm symbol ⏰ is displayed, the alarm function is ON. The same applies to the hourly chime symbol ⏰.
  5. After setting, press the B Key to exit the setting state.

Operating Instructions

Video 1: Product overview demonstrating features like clasp, scratch resistance, backlight, and water resistance.

Navigating Modes

Press the A Key (MODE/ADJUST) to cycle through the different modes: Time Mode → Date Mode → Alarm Mode → Stopwatch Mode → Dual Time Mode.

Stopwatch Mode

Stopwatch Mode Diagram

Figure 6: Stopwatch operation sequence.

  • The maximum value for the stopwatch is 29 minutes, 59.99 seconds.
  • In Stopwatch Mode, press the B Key to start or pause the stopwatch.
  • To clear the stopwatch data, hold down the B Key for 1.5 seconds. This will clear the data even if the stopwatch is currently running.

Dual Time Mode

Dual Time Mode Setting Diagram

Figure 7: Sequence for setting dual time.

  1. In Dual Time Mode, hold down the B Key for 1.5 seconds to enter the dual time setting state. The "hour" display will flash.
  2. Press the B Key to select the hour for adjustment.
  3. Press the A Key to adjust the flashing hour. Hold down the A Key to adjust it quickly.
  4. After setting, press the B Key to exit the setting state.

EL Backlight

EL Backlight in action

Figure 8: The EL backlight illuminates the digital display for visibility in the dark.

Press the B Key in any mode to activate the EL backlight for approximately 3 seconds, illuminating the digital display for easy reading in low-light conditions.

Maintenance and Care

Water Resistance

Water Resistance Chart

Figure 9: Water resistance guidelines for various activities.

  • The watch is rated for 30M (3 Bar) water resistance, suitable for daily use such as washing hands or getting caught in the rain.
  • DO NOT expose the watch to hot water or steam. This includes warm water for bathing or showering, as water vapor can enter the watch and cause damage.
  • DO NOT operate buttons while the watch is submerged in water.

General Care

  • Avoid exposing the watch to chemical cosmetics or corrosive daily necessities, as these can corrode the plating color of the watch surface.
  • Clean the watch regularly with a soft, dry cloth. For stainless steel bands, a slightly damp cloth can be used, followed by drying.
  • Store the watch in a cool, dry place away from direct sunlight and extreme temperatures.

User Tips

  • Strap Adjustment: The original metal bracelet can be challenging to resize. For easier adjustment and comfort, some users prefer to replace it with a 20mm leather or Milanese strap.
  • Alarm Function: If you are having trouble with the alarm, ensure the alarm symbol is clearly displayed on the digital screen to confirm it is activated.
  • Packaging: Please note that this watch typically ships without a dedicated box, usually in protective bubble wrap.
  • Time Setting Assistance: If you encounter difficulties adjusting the time or other settings, please refer to the detailed instructions in this manual or contact customer support for guidance.

Troubleshooting

Watch is not working or display is blank:
The battery may be depleted. The watch uses an LR1130 battery. Contact a professional for battery replacement.
Water or condensation inside the watch:
This usually occurs due to exposure to hot water, steam, or operating buttons underwater. Place the watch in a dry environment with a desiccant to absorb moisture. If the issue persists, seek professional repair.
Analog hands are not synchronized with the digital time:
Follow the instructions in the "General Operation Notes" under the Setup section to manually adjust the analog hands using the C Key.
Alarm is not sounding:
Ensure the alarm function is activated. Check for the alarm symbol on the digital display. If it's not present, follow the "Alarm Mode Setting" instructions to turn it ON.
Digital display is incorrect or frozen:
A soft reset might resolve the issue. If the problem persists, a battery removal and reinsertion (hard reset) by a qualified technician may be necessary.

Warranty and Support

SKMEI watches are manufactured with high-quality materials and craftsmanship. For any issues or inquiries regarding your watch, please contact the seller or authorized service center. Please note that damage caused by improper use, such as exposure to hot water or chemicals, may not be covered under warranty.

A PDF version of the user manual is available for download. Please refer to the product page for the direct link to the PDF document.

© 2023 SKMEI. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.