HYULIGHTS HYU-300B

Contents

HYULIGHTS HYU-300B 300W Beam Moving Head Light

Instruction Manual

1. Introduction

Thank you for choosing the HYULIGHTS HYU-300B 300W Beam Moving Head Light. This professional lighting fixture is designed to provide powerful and versatile lighting effects for various events and venues. To ensure safe and optimal performance, please read this instruction manual thoroughly before installation and operation. Keep this manual for future reference.

2. Safety Instructions

  • Always connect the fixture to a grounded power outlet.
  • Ensure the voltage and frequency match the specifications of the fixture (AC100-240V, 50/60Hz).
  • Do not open the housing; there are no user-serviceable parts inside. Refer all servicing to qualified personnel.
  • Avoid direct eye exposure to the light source.
  • Ensure proper ventilation around the fixture to prevent overheating.
  • Mount the fixture securely using appropriate hardware and safety cables.
  • Keep the fixture away from flammable materials, liquids, and excessive moisture.
  • Disconnect power before cleaning or performing any maintenance.

3. Package Contents

Upon unpacking, please verify that all items listed below are included and in good condition:

  • 1 x HYULIGHTS HYU-300B Moving Head Light
  • 1 x Power Cable
  • 1 x User Manual (this document)
  • 1 x DMX Cable
  • 2 x Omega Brackets
Examples of product packaging including flight case, carton box, and foam inserts.

Figure 3.1: Packaging examples

4. Product Overview

The HYU-300B is a powerful 300W beam moving head light featuring a 290W 14R lamp with a color temperature of 9300K. It includes a vibrant halo effect with 24pcs RGB 3in1 5050 LEDs, a 13-color wheel, and a gobo wheel with 14 gobos plus shake effect. The fixture offers precise movement with 540° Pan and 270° Tilt electric correction, a 48-facet rotating prism, frost, and a 6-in-1 rainbow effect. Its zoom beam angle ranges from 1.5° to 15°.

Front view of the HYULIGHTS HYU-300B moving head light.

Figure 4.1: Front view of the moving head light

Side view of the HYULIGHTS HYU-300B moving head light.

Figure 4.2: Side view of the moving head light

Rear view of the moving head light showing DMX IN/OUT, Power IN, ON/OFF switch, and Fuse.

Figure 4.3: Rear view with control panel and connections

Close-up of the LCD display and control buttons on the moving head light.

Figure 4.4: Close-up of the LCD display and control buttons

5. Setup

5.1 Mounting

  • The fixture can be mounted in various positions (floor, truss, wall) using the provided omega brackets.
  • Ensure the mounting surface or truss is capable of supporting the fixture's weight (9KG N.W, 11KG G.W).
  • Always use a safety cable when mounting the fixture overhead.

5.2 Electrical Connection

  • Connect the power cable to the 'POWER IN' port on the rear of the fixture.
  • Plug the other end of the power cable into a grounded AC100-240V, 50/60Hz power outlet.
  • Use the ON/OFF switch to power the unit.

5.3 DMX Connection

  • For DMX control, connect a DMX cable from your DMX controller's output to the 'DMX IN' port on the fixture.
  • If linking multiple fixtures, connect the 'DMX OUT' of the first fixture to the 'DMX IN' of the next, and so on.
  • Terminate the last fixture in the DMX chain with a DMX terminator (not included) to prevent signal reflection.

6. Operating Modes

The HYU-300B offers several operating modes, configurable via the LED display and control buttons (Figure 4.4) or DMX controller.

6.1 Control Panel Navigation

Use the 'Menu', 'Up', 'Down', and 'Enter' buttons on the LED display to navigate and adjust settings. The display shows current mode, DMX address, and other parameters.

6.2 DMX Mode (16 Channels)

In DMX mode, the fixture is controlled by an external DMX controller. Set the DMX address using the control panel. Refer to the DMX chart in the full technical specifications for channel functions.

6.3 Auto Mode

The fixture runs through pre-programmed light shows automatically. Select 'Auto Mode' from the display menu.

6.4 Sound Mode

The fixture reacts to sound via its built-in microphone, creating dynamic light shows synchronized with music. Select 'Sound Mode' from the display menu.

6.5 Master/Slave Mode

Link multiple fixtures together. One fixture acts as the 'Master' (running Auto or Sound mode), and others act as 'Slaves', mirroring the Master's movements and effects. Connect DMX cables in a daisy chain, and set the Master/Slave option on each fixture's display.

6.6 RDM (Remote Device Management)

RDM allows for remote configuration and monitoring of DMX fixtures from a compatible DMX controller.

6.7 Key Features and Effects

  • Pan/Tilt: 540° Pan and 270° Tilt with 16-bit electric correction for smooth and precise movements.
  • Lamp: Powerful 290W 14R lamp (9300K color temperature) for bright, sharp beams.
  • Halo Effect: 24pcs RGB 3in1 5050 LEDs create a vibrant ring effect around the main lens.
  • Color Wheel: 13 distinct colors plus white, with infinite rotating speed for dynamic color changes.
  • Gobo Wheel: 14 static gobos plus open, with shake effect and infinite rotating speed to create various patterns.
  • Prism: 1 piece of 48-facet rotating prism for splitting the beam into multiple patterns.
  • Other Effects: Frost filter for wash effects and a 6-in-1 rainbow effect for colorful beam transitions.
  • Zoom Beam Angle: Adjustable from 1.5° (sharp beam) to 15° (wider beam).
  • Strobe: Adjustable strobe speed up to 25 times/second.
  • Dimmer: 0-100% mechanical step dimmer for smooth intensity control.

Video 6.1: Product demonstration showcasing various lighting effects and features.

Stage lighting effect with multiple colorful beams and patterns on the floor.

Figure 6.1: Multiple lights creating colorful patterns

Beam lights projected onto a building at night.

Figure 6.2: Beam lights projected onto a building

Multiple moving head lights creating various colorful patterns on a stage floor.

Figure 6.3: Multiple lights with colorful patterns

Stage setup with multiple lights creating blue and yellow beams.

Figure 6.4: Stage setup with blue and yellow beams

Red light patterns projected onto the floor.

Figure 6.5: Red light patterns

White light beams cutting through a smoky environment.

Figure 6.6: White light beams

Internal view of the moving head light showing gears and motors.

Figure 6.7: Internal mechanism

7. Maintenance

  • Cleaning: Regularly clean the lenses and housing with a soft, lint-free cloth. Use a mild glass cleaner if necessary. Ensure the fixture is powered off and cool before cleaning.
  • Inspection: Periodically check all mounting hardware, cables, and connections for any signs of wear or damage. Replace any worn or damaged parts immediately.
  • Ventilation: Ensure that the ventilation openings are clear of dust and debris to maintain proper airflow and prevent overheating.
  • Lamp Replacement: Lamp replacement should only be performed by qualified technicians. Refer to the technical specifications for the correct lamp type.

8. Troubleshooting

ProblemPossible CauseSolution
Fixture does not power onNo power supply; Blown fuse; Faulty power cableCheck power connection; Replace fuse; Test/replace power cable
No light outputLamp not ignited; Dimmer at 0%; Internal faultCheck lamp status; Adjust dimmer setting; Contact support
No DMX controlIncorrect DMX address; Faulty DMX cable; No DMX signalVerify DMX address; Check DMX cable connections; Ensure DMX controller is active
Erratic movement/effectsDMX signal interference; Loose internal connection; OverheatingCheck DMX termination; Ensure proper ventilation; Contact support

9. Specifications

ParameterValue
VoltageAC100-240V, 50/60Hz
Power Dissipation450W
Lamp290W 14R (Color temperature: 9300K)
Halo Effect24pcs RGB 3in1 5050 LEDs
Channel Mode16 DMX512 Channels
Pan Scan540° (16bit) Electric correction
Tilt Scan270° (16bit) Electric correction
Strobe25 times/sec
Prism1pcs 48 rotating prisms
Other EffectsFrost and 6in1 rainbow effect
Zoom Beam Angle1.5°-15°
Color Wheel13 colors + color rotating speed. infinite rotating
Gobo Wheel14 gobos + shake + Gobo Rotating speed. infinite rotating
Dimmer0-100% mechanical step
FeaturesAuto mode, Sound mode, Master&Slave, RDM
HousingHigh temperature resistant plastic shell
Protective ClassIP 20
Display BoardLED display
Net Weight (N.W)9KG
Gross Weight (G.W)11KG
Packing Size50*36*36.5cm

10. User Tips

  • For optimal beam visibility, consider using a fog or haze machine in your venue.
  • Experiment with different gobo and prism combinations to create unique visual effects.
  • When using multiple fixtures, synchronize them via DMX or Master/Slave mode for a cohesive light show.
  • Regularly update your DMX programming to keep your light shows fresh and engaging.

11. Warranty & Support

HYULIGHTS is committed to providing high-quality products and excellent customer service.

  • 30-Days Full Refund Guarantee: If you are not completely satisfied or the item isn't what you expected, just tell us within 30 days. We will give you a full refund unconditionally.
  • Quick Response Within 12 Hours: You can contact us without any hesitation at any time of the day, and we will reply to you within 12 hours. (It would be appreciated if you could provide us with a video or pictures if available).
  • 2-Year Warranty: We will send you brand new items for free or give you a full refund if any quality problems occur within 2 years from the date of purchase.
  • Friendly Reminder: It's better to contact us than leaving a negative shopping experience. Nothing is more important than your satisfaction, and we will do our best to serve you.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.