OBD2 Scanner V119

Contents

V119 OBD2 Scanner User Manual

Model: V119 - Car Diagnostic Tool with Voltage Test & USB Power

1. Introduction

The V119 OBD2 Scanner is a professional diagnostic tool designed to help you quickly and accurately identify issues with your vehicle. It supports full OBDII/EOBD and CAN protocols, allowing it to read and clear diagnostic trouble codes (DTCs), perform I/M readiness tests, monitor live data, and conduct battery voltage tests. This manual provides detailed instructions for setting up, operating, and maintaining your V119 scanner.

V119 OBD2 Scanner with diagnostic menu and key features
Figure 1: V119 OBD2 Scanner displaying its diagnostic menu and core functions.

2. Setup

  1. Locate the OBD2 Port: The OBD2 port is typically located under the dashboard on the driver's side of the vehicle. Refer to your vehicle's owner's manual if you cannot find it.
  2. Connect the Scanner: Plug the V119 scanner's OBD2 connector firmly into your vehicle's OBD2 port.
  3. Power On: The scanner will automatically power on once connected to the vehicle's OBD2 port. Alternatively, it can be powered via a USB connection.
  4. Language Selection: If prompted, select your preferred language from the available options (the device supports 13 languages).

3. Operating Instructions

Navigate through the menus using the 'UP', 'DOWN', 'LEFT', 'RIGHT' arrow buttons and confirm selections with the 'OK' button. Use 'EXIT' to return to the previous menu.

V119 OBD2 Scanner highlighting upgraded features
Figure 2: Overview of the V119 scanner's upgraded features and user interface.

3.1 Diagnostic Menu Functions

  • Read Codes: Retrieves Diagnostic Trouble Codes (DTCs) from the vehicle's computer. These codes indicate specific issues.
  • Erase Codes: Clears DTCs from the vehicle's computer and turns off the Check Engine Light (MIL). Ensure the underlying issue is resolved before clearing codes.
  • View Freeze Frame: Displays a snapshot of sensor data recorded when an emission-related fault occurred.
  • I/M Readiness: Checks the status of the vehicle's emission-related monitoring systems to determine if they are ready for an inspection/maintenance test (Smog Check).
  • Vehicle Info: Retrieves vehicle identification number (VIN), calibration ID (CALID), and calibration verification number (CVN).
  • Data Stream: Displays live sensor data in real-time, such as engine RPM, vehicle speed, oxygen sensor readings, etc.
  • Mode 6: Accesses results for on-board diagnostic monitoring tests of specific components/systems that are not continuously monitored.
  • O2 Sensor Test: Retrieves O2 sensor monitor test results for the most recently completed tests from the vehicle's on-board computer.

3.2 Battery Test Function

The Battery Test function measures the battery voltage, views the battery voltage curve, and assesses battery life.

V119 OBD2 Scanner displaying the Battery Test function
Figure 3: Battery Test interface showing voltage measurement and battery condition (Poor, Medium, Good).

To perform a battery test:

  1. From the main menu, select 'Battery Test'.
  2. Choose 'Battery Measurement' to see the current voltage.
  3. Select 'Battery Monitoring' to view the voltage curve over time.
  4. Select 'Battery Life' for an assessment of the battery's condition (Poor, Medium, Good).

3.3 Visual Indicators

The V119 scanner features user-friendly visual indicators to quickly assess vehicle status:

  • Green: Indicates good vehicle condition.
  • Yellow: Suggests that attention is needed, possibly for minor issues or pending codes.
  • Red: Signifies that immediate action is required due to a significant issue.
V119 OBD2 Scanner illustrating user-friendly visual indicators
Figure 4: Explanation of the Green, Yellow, and Red visual indicators.

4. Maintenance

  • Cleaning: Wipe the scanner with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
  • Cable Care: Avoid bending or twisting the OBD2 cable excessively to prevent damage.
  • Software Updates: Check the manufacturer's website periodically for any available software updates to ensure optimal performance and compatibility.

5. Troubleshooting

  • Scanner does not power on: Ensure the OBD2 connector is securely plugged into the vehicle's port. Check the vehicle's battery for sufficient charge. Try powering via USB if available.
  • Link error/No communication: Verify that the vehicle's ignition is in the 'ON' position (engine off or running). Check for a blown fuse in the vehicle's OBD2 circuit. Ensure the scanner's cable is not damaged.
  • Cannot clear codes: Codes can only be cleared if the vehicle's ignition is in the 'ON' position (engine off). If the underlying fault is still present, the codes may reappear immediately after clearing. Resolve the issue first.
  • Incompatible vehicle: The V119 scanner supports EOBD/CAN OBD2 protocols. Generally, this includes most vehicles manufactured in the USA since 1996, in the European Union since 2001 (petrol) or 2004 (diesel), and in Asia since 2008. Older or non-standard vehicles may not be compatible.

6. Specifications

FeatureDetail
ModelV119
Item TypeCode Readers & Scan Tools
Supported ProtocolsOBDII/EOBD, CAN
DTC Library10,000+ codes
DisplayMonochrome LCD with backlight
Power SourceVehicle OBD2 port (8-18V) or USB
Operating Temperature0°C to 60°C (32°F to 140°F)
Storage Temperature-20°C to 70°C (-4°F to 158°F)
Dimensions (L x W x H)Approximately 16 cm x 13 cm x 6 cm
WeightApproximately 0.239 kg
OriginMainland China

7. User Tips

  • For older vehicles (e.g., model year 2000), ensure they are OBD2 compliant. While many vehicles from 1996 onwards are compliant in the US, regional variations exist.
  • When performing a battery test, ensure the vehicle is off but the scanner is connected to get an accurate reading of the battery's resting voltage.
  • Always consult your vehicle's service manual for specific diagnostic procedures and code interpretations.

8. Frequently Asked Questions (FAQ)

Q: Will this scanner work with a 2000 model car?
A: The V119 scanner supports EOBD/CAN OBD2 protocols. Most vehicles manufactured in the USA since 1996 are OBD2 compliant. For other regions, compliance typically started around 2001 for petrol cars and 2004 for diesel cars. Please check your vehicle's manual or look for an 'OBDII compliant' sticker under the hood.
Q: Is this compatible with a 2013 VW Golf 7 2.0 TDi?
A: Yes, a 2013 VW Golf 7 2.0 TDi should be fully compatible with the V119 scanner as it supports EOBD/CAN protocols, which are standard for European diesel vehicles from 2004 onwards.
Q: Can this test a 2007 Ford Falcon BF XR6?
A: Yes, a 2007 Ford Falcon BF XR6 should be compatible with the V119 scanner as it supports standard OBD2 protocols.

9. Support

For technical assistance or further inquiries, please refer to the seller's support channels or contact the manufacturer directly. Keep your product model number (V119) handy when seeking support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.