Uckazy FM Transmitter

Contents

Uckazy FM Transmitter Instruction Manual

For BMW, Audi, and Mercedes Benz Vehicles

1. Product Overview

The Uckazy FM Transmitter is designed to provide audio output to your car's original radio system when it lacks sound or an AUX input. This device allows you to transmit audio from an external source (e.g., an Android head unit) to your car's FM radio, ensuring sound functionality without modifying the original car's wiring extensively. It is compatible with BMW, Audi, and Mercedes Benz vehicles that retain their original car console or radio.

Uckazy FM transmitter module with RCA and power cables, labeled 'Used when BMW radio has no sound and no AUX'
Uckazy FM Transmitter Module, designed for vehicles without sound or AUX input.

2. Setup and Installation

Before installation, ensure your vehicle retains its original car console or radio. This product is suitable for Android screens that integrate with the original car headunit.

2.1 Wiring Instructions

Carefully follow the wiring diagrams below for your specific vehicle model. Incorrect wiring can lead to unstable sound or no sound output.

For BMW Vehicles:

Detailed wiring diagram for BMW vehicles, showing connections for AUX R-IN, AUX L-IN, GND, B+BATTERY, and audio out to the headunit/radio.
Wiring Diagram for BMW

For Mercedes Benz & Audi Vehicles:

Detailed wiring diagram for Benz & Audi vehicles, showing connections for AUX R-IN, AUX L-IN, GND, B+BATTERY, and audio out to the headunit/radio.
Wiring Diagram for Benz & Audi

2.2 Power Connection Note

The yellow B+ power wire must be connected to a constant 12V power source (B+ or battery). Do NOT connect it to the red ACC (Accessory) wire. Incorrect power connection can lead to unstable sound or device malfunction.

2.3 FM Channel Configuration (DIP Switches)

The FM transmission channel is set using the DIP switches on the side of the transmitter module. Refer to the table below to select your desired FM frequency. 'H' indicates the switch is in the UP position, and 'L' indicates the switch is in the DOWN position.

FM Reception Channel table illustrating DIP switch settings (H/L) for various FM frequencies (87.7MHz to 106.1MHz), with an example of DIP switch configuration.
FM Reception Channel Table and DIP Switch Example
FM Reception Channel Settings
CHANNEL1234
87.7MHzLLLL
87.9MHzLHLL
88.1MHzLLHL
88.3MHzLHHL
88.5MHzLLLH
88.7MHzLHLH
88.9MHzLLHH
89.1MHzLHHH
104.7MHzHLLL
104.9MHzHHLL
105.1MHzHLHL
105.3MHzHHHL
105.5MHzHLLH
105.7MHzHHLH
105.9MHzHLHH
106.1MHzHHHH

3. Operating Instructions

  1. Set FM Channel: Before powering on, use the DIP switches on the side of the FM transmitter module to select your desired FM frequency according to the 'FM Reception Channel' table in Section 2.3.
  2. Power On: Ensure all wiring is correctly connected as per the setup instructions.
  3. Tune Car Radio: Switch your car's original radio to the FM function. Tune your car radio to the exact FM frequency you set on the transmitter's DIP switches.
  4. Audio Playback: Once the frequencies match, audio from your external source (e.g., Android head unit) will be transmitted and played through your car's speakers.

Important: It is crucial to switch your car's radio to the FM function and ensure the channel of the radio transmitter matches the channel of your car's headunit for proper audio output.

4. Maintenance

The Uckazy FM Transmitter is designed for durability and requires minimal maintenance. Keep the module free from dust and moisture. Avoid exposing it to extreme temperatures. Do not attempt to open the casing or modify the internal components, as this will void any potential warranty and may damage the device.

5. Troubleshooting

If you encounter issues with your Uckazy FM Transmitter, refer to the following common problems and solutions:

  1. Unstable Sound:
    - Ensure the yellow B+ power wire is connected to a constant 12V power source (B+ or battery). It must NOT be connected to the red ACC (Accessory) wire.
  2. No Sound After Installation:
    - Verify that your car's radio is switched to the FM function.
    - Confirm that the FM channel set on the transmitter's DIP switches precisely matches the frequency tuned on your car's radio.
  3. No Sound Even with Matching Channels:
    - Double-check that the yellow B+ power cable is securely connected to a constant 12V source.
    - Confirm that the original car's main unit or radio is still installed and functional, as this product relies on its presence.

If these steps do not resolve the issue, please contact customer support for further assistance.

6. Specifications

  • Product Type: FM Transmitter Module
  • Compatibility: BMW, Audi, Mercedes Benz (vehicles retaining original headunit/radio)
  • Function: Converts external audio input to FM signal for playback through car radio.
  • Power Input: 12V DC (constant B+)
  • Audio Input: RCA (Left/Right)
  • FM Channels: Selectable via DIP switches (87.7MHz - 106.1MHz)
  • Package Dimensions (approx.): 20 cm (L) x 16 cm (W) x 10 cm (H)
  • Package Weight (approx.): 2.0 kg

7. User Tips

  • Always ensure the yellow B+ power wire is connected to a constant 12V power source, not an accessory wire, to prevent unstable sound.
  • Carefully set the DIP switches to your desired FM frequency before final installation.
  • When troubleshooting, always verify that your car's radio is set to the exact FM frequency as the transmitter.
  • This device is intended for use with vehicles that retain their original car radio or headunit.

8. Warranty and Support

For warranty information or technical support, please refer to the seller's policies or contact the Uckazy Europe Store directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.