TOWILD CL900

Contents

TOWILD CL900 Smart Bike Light User Manual

Model: CL900

1. Introduction

Thank you for choosing the TOWILD CL900 Smart Bike Light. This high-performance bicycle headlight is designed to enhance your cycling safety and visibility with its powerful 900 lumens output, intelligent features, and robust construction. Please read this manual carefully before use to ensure proper operation and maintenance.

TOWILD CL900 Smart Bike Light with key features listed
The TOWILD CL900 Smart Bike Light highlighting its anti-glare, under-mounted support, IPX6 waterproof rating, vibration sensor, intelligent temperature control, and 2600mAh rechargeable battery.

2. Package Contents

Please check the box for the following items:

  • 1 x CL900 Bike Light
  • 1 x Mount for Handlebar
  • 1 x GoPro Base
  • 1 x Type-C Charging Cable
  • 1 x User Manual
  • 1 x Wireless Remote Controller (Optional, depending on purchase)
Contents of the TOWILD CL900 package
Illustration of the CL900 package contents, including the light, mounts, cable, and manual.

3. Specifications

FeatureDetail
ModelCL900
MaterialAluminum Alloy
Lumen OutputMax 900 Lumens
Beam Distance155 meters
Max Light Intensity8500 candelas
BatteryBuilt-in 2600mAh (18650 Lithium-ion)
Charging PortType-C
Waterproof LevelIPX6
Mounting PlacementHandlebar
Support Dimmer5 - 8 Files (Light Modes)
Intelligent SensingYes
Intelligent Temperature ControlYes
Fall Height1.2 meters
CertificationsCE, FCC
Dimensions (Light only)98.5mm (Length) x 31mm (Width)
Dimensions (with mount)98.5mm (Length) x 75mm (Height)

3.1 Performance Table

ModeLuminanceEndurance Time
High900 lumens1h 30min
Medium400 lumens3h
Low200 lumens6h
Night Warning (Breathing mode)200 lumens12h
Day Warning600 lumens10h

Note: The above parameters are approximate values from laboratory tests with a 2600mAh 18650 lithium-ion battery and may vary with usage and environmental conditions.

Product dimensions of the TOWILD CL900 bike light
Detailed product dimensions of the CL900 bike light.

4. Setup and Installation

The CL900 offers versatile mounting options for your convenience.

4.1 Normal Handlebar Installation

  1. Attach the handlebar mount to your bicycle's handlebar.
  2. Secure the mount firmly using the adjustable strap.
  3. Slide the CL900 bike light onto the mount until it clicks into place.
  4. Adjust the angle of the light as needed.

4.2 Installation with GoPro Base (Under-mounted)

  1. Secure the GoPro base to your desired location (e.g., under a bike computer mount).
  2. Ensure the base is tightly fastened.
  3. Align the CL900 light with the GoPro base and slide it in until it locks.
  4. Verify the light is securely attached before riding.
Step-by-step installation guide for TOWILD CL900 bike light
Visual guide for both normal handlebar installation and under-mounted installation using a GoPro base.

5. Operation

5.1 Power On/Off

  • To Turn On: Long press the main button for 0.5 seconds.
  • To Turn Off: Long press the main button for 0.8 seconds.

5.2 Switching Modes (Smart/Manual)

While the light is OFF, long press the main button for 3 seconds to switch between Smart mode and Manual mode.

  • Smart Mode: The indicator light will be blue.
  • Manual Mode: The indicator light will be green.

5.3 Light Modes

In Manual mode, click the main button to cycle through the available lighting modes: High Light, Medium Light, Low Light, Night Warning (Breathing mode), Day Warning.

5.4 Smart Start/Stop Feature

In Smart mode, the main light will automatically turn on when shaken (detecting movement). When the light is in standby (no movement detected), the indicator light will flash every two seconds. The optional wireless remote control can activate the light for up to 1 hour in this standby state. After 1 hour, manual activation is required.

5.5 Wireless Remote Control (Optional)

If you have the optional wireless remote control, it provides convenient access to light functions:

  • Switch Warning/Lighting Mode: Click the corresponding button on the remote.
  • Switch Smart/Manual Mode: Long press the mode button on the remote for 0.5 seconds.
  • Power On/Off: Long press the power button for 0.5 seconds to turn on, and 0.8 seconds to turn off.
  • One-Key Brightest Mode: Long press the lightning bolt button to instantly activate the brightest mode. Release the button to return to the previous light setting.
Instructions for the optional wireless remote control for TOWILD CL900
Detailed functions of the optional wireless remote control.

5.6 Anti-Glare Cut-off Beam

The CL900 features an anti-glare cut-off line, designed according to the German STVZO standard. This prevents the light from shining directly into the eyes of oncoming pedestrians and drivers, enhancing safety for everyone.

Diagram illustrating the anti-glare cut-off light beam of the CL900
Visual representation of the cut-off light beam, preventing glare for oncoming traffic.

5.7 Side Warning Light

The CL900 includes side warning lights that allow light to show through from the sides. This effectively reminds pedestrians and vehicles of your presence, making riding safer, especially in urban environments.

Image showing the side warning light feature of the CL900
The CL900's side warning light enhances visibility from the side.

5.8 Intelligent Temperature Control

The CL900 is equipped with an intelligent temperature control system. If the internal temperature of the lamp head reaches 65 degrees Celsius, the high-light gear will automatically lower to the middle gear to prevent overheating and ensure longevity of the device.

Diagram illustrating the intelligent temperature control feature of the CL900
The CL900 features intelligent temperature control to prevent overheating.

6. Charging and Battery Indicator

6.1 Charging

The CL900 uses a Type-C charging port. Connect the provided Type-C cable to the light and a suitable USB power source (e.g., computer, wall adapter, power bank) to charge the built-in 2600mAh battery.

TOWILD CL900 bike light being charged via Type-C cable
The CL900 light charging via its Type-C port.

6.2 Power Display

When the light is powered off, click the main button to display the current power level:

Smart Mode Power Indicator:

  • Blue Light Always On: 100% - 30% battery remaining.
  • Blue Light Slow Flashing: 29% - 10% battery remaining.
  • Blue-Red Flash: Lower than 10% battery remaining.

Manual Mode Power Indicator:

  • Green Light Long Light: 100% - 30% battery remaining.
  • Green Light Slow Flash: 29% - 10% battery remaining.
  • Green-Red Flash: Lower than 10% battery remaining.
Power display indicators for TOWILD CL900 in Smart and Manual modes
Visual guide to the power indicator lights in both Smart and Manual modes.

7. Maintenance

7.1 Waterproofing

The CL900 has an IPX6 waterproof rating, meaning it is protected against high-pressure water jets from any direction. To maintain its waterproof integrity, please ensure that the tail plug (charging port cover) is always securely closed when not charging.

TOWILD CL900 bike light with IPX6 waterproof rating
The CL900 is IPX6 waterproof; ensure the tail plug is closed.

7.2 Cleaning

Wipe the light with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the surface or internal components.

7.3 Storage

When storing the light for extended periods, ensure it is fully charged and store it in a cool, dry place. Recharge the battery every 3-6 months to prolong its lifespan.

8. Troubleshooting

  • Light not turning on: Check if the battery is charged. If not, connect it to a power source using the Type-C cable. Ensure the power button is pressed correctly (long press 0.5s).
  • Light not charging: Verify the Type-C cable is securely connected to both the light and the power source. Try a different cable or power adapter.
  • Light unexpectedly changes brightness: This is likely due to the intelligent temperature control feature. If the light gets too hot, it will automatically reduce brightness to prevent damage.
  • Remote control not working: Ensure the remote control is within range and its battery (if applicable) is functional. Check if the light is in Smart mode for remote control functionality after standby.
  • Water ingress: Immediately turn off the light and allow it to dry completely. Ensure the tail plug is always securely closed during use.

9. User Tips

  • For optimal visibility and safety, especially in urban areas, utilize the side warning lights.
  • Regularly check the battery level before long rides to avoid unexpected power loss.
  • Take advantage of the Smart mode for automatic activation and the convenience of the optional remote control.
  • Always ensure the Type-C charging port cover is sealed to maintain the IPX6 waterproof rating.

10. Warranty and Support

TOWILD products are manufactured to high-quality standards. For any issues or questions regarding your CL900 Smart Bike Light, please contact the seller or manufacturer's customer support for assistance. Keep your purchase receipt as proof of purchase for warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.