IdeaFormer IR3 V2/V1 Extension Bracket

Contents

IdeaFormer IR3 V2/V1 3D Printer Conveyor Belt Extension Bracket User Manual

Enhance your 3D printing experience with extended support.

1. Product Overview

The IdeaFormer Metal Extension Bracket is designed to enhance the functionality of your IdeaFormer IR3 V1 and IR3 V2 conveyor belt 3D printers. This extended roller system provides additional support for printed models, mitigating the risk of model detachment by counterbalancing the forward shift in the center of gravity during continuous printing.

IdeaFormer Metal Extension Bracket
Figure 1: IdeaFormer Metal Extension Bracket
Side view of the extension bracket
Figure 2: Side view of the extension bracket, showing the roller mechanism.
Video 1: Demonstration of the 3D printer with the extension bracket in operation, showcasing continuous printing and model output.

2. Setup and Installation

This extension bracket requires assembly. Please follow these steps carefully for proper installation.

  1. Unpack Components: Carefully remove all parts from the packaging. Verify that all components are present.
  2. Attach the Main Bracket: Secure the main metal bracket to your IdeaFormer IR3 V1 or V2 3D printer according to the printer's specific mounting points. Ensure a firm and stable connection.
  3. Install Rollers: Insert the individual rollers into the designated slots on the extension bracket. Make sure they rotate freely.
  4. Adjust IR3 Plate: The IR3 plate on the extension bracket is adjustable. Position it to align with the conveyor belt of your 3D printer.
  5. IR3 plate adjustment mechanism
    Figure 3: The IR3 plate can be adjusted up and down to match the printer's conveyor belt height.
  6. Leveling: Ensure that the rollers of the extension bracket are at the same level as the printer's conveyor belt for well-balanced conveyance.
  7. Checking roller level with a ruler
    Figure 4: Verify that the rollers maintain the same level as the conveyor belt for optimal performance.
  8. Final Check: Double-check all connections and adjustments to ensure stability and proper alignment before operating the printer.

3. Operation

Once installed, the extension bracket works in conjunction with your 3D printer's conveyor belt system. It provides continuous support for longer prints as they exit the print area.

  • Continuous Printing: The extended rollers allow for continuous printing of long objects or multiple smaller objects without manual intervention to remove finished prints.
  • Model Detachment Mitigation: By extending the support surface, the bracket helps prevent models from detaching or falling prematurely due to changes in the center of gravity.
3D printer with extension bracket in use
Figure 5: The extension bracket integrated with an IdeaFormer IR3 V2 3D printer during operation.

4. Maintenance

To ensure optimal performance and longevity of your extension bracket, regular maintenance is recommended:

  • Cleaning: Periodically clean the rollers and the bracket frame to remove any dust, filament debris, or other contaminants that may affect smooth operation. Use a soft, dry cloth.
  • Lubrication: If the rollers begin to squeak or show resistance, apply a small amount of appropriate lubricant to their axles.
  • Inspection: Regularly inspect the bracket for any signs of wear, damage, or loose connections. Tighten any loose screws.

5. Troubleshooting

If you encounter issues with your extension bracket, consider the following:

  • Models Detaching:
    • Ensure the IR3 plate and rollers are perfectly level with the printer's conveyor belt.
    • Check for any obstructions preventing smooth movement of the rollers.
    • Verify that the bracket is securely attached to the printer.
  • Rollers Not Moving Smoothly:
    • Clean the rollers and their axles thoroughly.
    • Apply a small amount of lubricant if necessary.
    • Check for any bent or damaged rollers that may need replacement.
  • Bracket Instability:
    • Re-tighten all mounting screws connecting the bracket to the printer.
    • Ensure the printer itself is on a stable, level surface.

6. Specifications

Feature Detail
Item Type Metal Extension Bracket
Brand Name IdeaFormer
Model Number For IR3 V2/V1
Assembly Required Yes
Control Method Others (Passive support)
Item Shape Others (Bracket with rollers)
Origin Mainland China
Package Weight 2.7 kg
Package Dimensions (L x W x H) 65 cm x 17 cm x 8 cm

7. Warranty and Support

All items are tested and ensured to be in good condition before shipping. If the item is defective or damaged upon receipt, please notify us within 48 hours. We offer a refund or replacement for items damaged in transit. Items cannot be accepted for return after 15 days.

Our warranty does not cover products that have been physically damaged, misused, or improperly installed by the buyer/user.

For further support or inquiries, please contact the IdeaFormer Store directly.

8. User Tips

  • Stable Surface: Always place your 3D printer and the attached extension bracket on a stable, level surface to prevent vibrations and ensure consistent print quality.
  • Regular Alignment Checks: Periodically check the alignment of the extension rollers with the conveyor belt, especially after moving the printer or performing maintenance.
  • Cleanliness is Key: Keep the rollers and the belt clean to avoid any friction or marks on your finished prints.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.