MCHOSE K99V2

Contents

K99V2 Customized Mechanical Keyboard User Manual

Model: K99V2 | Brand: MCHOSE

1. Introduction

The MCHOSE K99V2 is a high-performance customized mechanical keyboard designed for both gaming and office use. It features tri-mode connectivity (wired, 2.4G wireless, and Bluetooth), vibrant RGB backlighting, hot-swappable switches, and an ergonomic design for enhanced comfort and versatility.

K99V2 Customized Mechanical Keyboard in black and white variants

Figure 1: K99V2 Customized Mechanical Keyboard overview, showing black and white variants.

2. Package Contents

Please check the package for the following items:

  • K99V2 Mechanical Keyboard
  • Instruction Manual (this document)
  • Key Puller
  • USB Type-C Cable

3. Setup

3.1 Initial Charging

Before first use, it is recommended to fully charge the keyboard using the provided USB Type-C cable. Connect the cable to the keyboard's Type-C port and a power source (e.g., computer USB port or USB wall adapter).

3.2 Connectivity Modes

The K99V2 supports three connection modes: Wired (Type-C), 2.4G Wireless, and Bluetooth. You can connect up to 3 Bluetooth devices simultaneously.

K99V2 keyboard with a Type-C cable connected, illustrating stable three-mode connection

Figure 2: K99V2 keyboard with Type-C cable connected, demonstrating wired mode.

3.2.1 Wired Connection

  1. Connect the USB Type-C cable to the keyboard's Type-C port.
  2. Connect the other end of the cable to a USB port on your computer.
  3. The keyboard will automatically switch to wired mode.

3.2.2 2.4G Wireless Connection

  1. Locate the 2.4G wireless receiver (dongle) usually stored in a slot on the keyboard.
  2. Plug the 2.4G receiver into an available USB port on your computer.
  3. Switch the keyboard to 2.4G mode using the mode switch (location may vary, refer to keyboard's physical layout).
  4. The keyboard should connect automatically.

3.2.3 Bluetooth Connection

  1. Switch the keyboard to Bluetooth mode using the mode switch.
  2. On your computer or device, enable Bluetooth and search for new devices.
  3. Select "K99V2" (or similar name) from the list of available devices to pair.
  4. Follow any on-screen prompts to complete the pairing process.
  5. The keyboard can store up to 3 Bluetooth profiles. Use specific key combinations (e.g., Fn+1, Fn+2, Fn+3) to switch between paired devices.

4. Operating Instructions

4.1 Power On/Off

Locate the power switch on the keyboard (usually on the side or back) to turn the device on or off.

4.2 Backlight Control

The K99V2 features approximately 16 million color RGB backlighting with front/side strip RGB and surround atmosphere light. Specific key combinations (often involving the 'Fn' key) are used to control lighting effects:

  • Change Lighting Modes: Use Fn + [Key] to cycle through various lighting effects.
  • Adjust Brightness: Use Fn + [Arrow Up/Down] to increase or decrease backlight brightness.
  • Adjust Speed/Direction: Use Fn + [Arrow Left/Right] to change the speed or direction of dynamic lighting effects.
K99V2 keyboard showing its wrap-around RGB strip

Figure 3: K99V2 keyboard showing its wrap-around RGB strip.

4.3 Ergonomic Adjustment

The keyboard features adjustable foot supports to achieve an ergonomic typing angle of 6-8 degrees, with an ultra-low front height of approximately 18.8mm for comfortable use.

Image illustrating the ergonomic low front height (approx. 18.8mm) and 6-8° adjustable angle

Figure 4: Ergonomic low front height and adjustable angle.

5. Maintenance

5.1 Cleaning

  • Turn off the keyboard and disconnect it from your computer before cleaning.
  • Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution to wipe the keycaps and chassis.
  • For dust and debris between keys, use compressed air.
  • Avoid spraying liquids directly onto the keyboard.

5.2 Keycap and Switch Replacement

The K99V2 features hot-swappable switches, allowing for easy replacement without soldering. Use the provided key puller to carefully remove keycaps and switches.

  1. Removing Keycaps: Use the key puller to gently grip the keycap and pull upwards.
  2. Removing Switches: Once the keycap is removed, use the switch puller (often integrated with the key puller) to grasp the switch and pull it straight up.
  3. Installing Switches: Align the pins of the new switch with the holes on the PCB and press down firmly until it clicks into place. Ensure pins are not bent.
  4. Installing Keycaps: Align the keycap with the switch stem and press down gently until it is secure.
Image showing the refined embellishment of the balance bar and satellite axis for improved key feel consistency

Figure 5: Illustration of switch and stabilizer components.

6. Troubleshooting

6.1 Keyboard Not Responding

  • Ensure the keyboard is powered on.
  • Check the connection mode (wired, 2.4G, Bluetooth) and ensure it matches your device's connection.
  • For wired mode, try a different USB port or cable.
  • For 2.4G wireless, ensure the receiver is securely plugged in and try a different USB port.
  • For Bluetooth, ensure the keyboard is paired correctly and try re-pairing.
  • Check the battery level and charge if necessary.

6.2 Backlight Not Working/Incorrect

  • Ensure the backlight is enabled via the appropriate Fn key combination.
  • Adjust brightness using Fn + Arrow Up.
  • Try cycling through different lighting modes.
  • If a specific key's backlight is off, check if the switch is properly seated or if the LED is faulty (for advanced users).

6.3 Connectivity Issues (Wireless/Bluetooth)

  • Ensure the keyboard is within range of your device.
  • Minimize interference from other wireless devices.
  • For Bluetooth, try forgetting the device on your computer/phone and re-pairing.
  • Ensure the keyboard's battery is sufficiently charged.

7. Specifications

FeatureDescription
ModelK99V2
Layout98 Keys (98% Arrangement Drop Arrow Key Layout)
Connection ModeTri-mode: Type-C Wired, 2.4G Wireless, Bluetooth
Keycap MaterialTwo-color injection PBT / ABS plastic
Keycap HeightMDA / Original factory (depending on variant)
SwitchesHot-swappable (Ryukyu Light Ice Cream Shaft, Hyacinth axis options)
Positioning PlateSlotted PC / Slot FR4 sink gold
StructureGasket structure with six-layer silencer fill
PCB1.2mm single key slotting (lower lamp position)
BacklightApprox. 16 million Color RGB (Front/Side Strip RGB), RGB surround atmosphere light
Battery Capacity8000mAh
System CompatibilityWindows/macOS
Product Size44.4 x 19.6 x 6.3 CM
Product Weight1.66 KG
Cable Length1.5 m
Simultaneous DevicesUp to 3 (Bluetooth)
Decorative Weight BlockAluminum alloy oxidation / Stainless steel PVD
Exploded view of the keyboard's internal gasket structure and six-layer silencer fill components

Figure 6: Exploded view of internal structure and components.

Comparison of Slotted PC positioning plate and Slot FR4 double-sided gold-sinking positioning plate

Figure 7: Comparison of PC and FR4 positioning plates.

Image detailing different shaft body options: Ryukyu Light Ice Cream Shaft and Hyacinth axis

Figure 8: Available shaft body options.

8. User Tips

  • Experiment with Switches: Since the K99V2 is hot-swappable, don't hesitate to try different mechanical switches to find the feel that best suits your typing or gaming style.
  • Utilize Multi-Device Connectivity: Take advantage of the keyboard's ability to connect to up to three Bluetooth devices. This is ideal for switching seamlessly between a computer, tablet, and smartphone.
  • Customize RGB Lighting: Explore the various RGB lighting modes and effects to personalize your keyboard's appearance and match your setup or mood.
  • Ergonomic Positioning: Adjust the keyboard's feet to find the most comfortable typing angle for extended use, reducing strain on your wrists.

9. Warranty and Support

For warranty information or technical support, please refer to the seller's policies or contact the point of purchase. Keep your proof of purchase for any warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.