DOOYA DM35R 10/17, DM35S 10/17

Contents

Dooya Tubular Motor Instruction Manual

Models: DM35R 10/17, DM35S 10/17

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Dooya Tubular Motor, models DM35R 10/17 and DM35S 10/17. These motors are designed for various rolling blind applications, offering reliable and efficient performance. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Dooya Tubular Motor DM35R and DM35S overview

Figure 1: Dooya Tubular Motor DM35R and DM35S overview.

2. Safety Information

  • Ensure all electrical connections are made by a qualified electrician and comply with local electrical codes.
  • Disconnect power before performing any installation, maintenance, or troubleshooting.
  • Do not allow children to play with controls or the motor system.
  • Keep hands and loose clothing clear of moving parts during operation.
  • Do not operate the motor if it is damaged or malfunctioning.
  • The motor is rated IP44, meaning it is protected against solid objects larger than 1mm and splashing water from any direction. It is not waterproof for immersion.
Warning label on Dooya Tubular Motor

Figure 2: Warning label on the motor, indicating electrical safety and disposal information.

3. Product Overview

3.1 Models

  • DM35R 10/17 (Radio Tubular Motor): Features a built-in RF433MHz module for remote control operation. The new version includes a built-in signal antenna.
  • DM35S 10/17 (Standard Tubular Motor): A 4-wire motor without a built-in RF433MHz module, requiring external control mechanisms.

3.2 Key Features

  • Voltage: 220V/230V, 50/60Hz
  • Wattage: 121W
  • Current: 0.53A
  • Torque: 10Nm
  • Speed: 17 revolutions per minute (r/min)
  • Operation Time: S2 4min (Short-time duty, 4 minutes)
  • Insulation Class: H
  • IP Rating: IP44
  • Compatible Tube Diameter: Ø35mm, suitable for 40mm, 45mm, 47mm, and 50mm tubes (Octagonal, Round, Groove).

3.3 Components

The package typically includes the tubular motor and a limit adjustment tool. Other components such as the driving tube, drive adapter, wall bracket, idler bracket, fabric, and bottom beam are usually ordered separately.

Video 1: Unboxing and overview of the Dooya Tubular Motor DM35R 10/17, showing the motor, limit adjustment tool, and wiring.

DM35R 10/17 motor with accessories including limit adjustment tool

Figure 3: DM35R 10/17 motor with included accessories, such as the limit adjustment tool.

4. Specifications

AttributeDM35R 10/17 (Radio)DM35S 10/17 (Standard)
Brand NameDOOYA / BIAONUDOOYA / BIAONU
Model NumberDM35R 10/17DM35S 10/17
Voltage220V/230V220V/230V
Frequency50/60Hz50/60Hz
Wattage121W121W
Current0.53A0.53A
Torque (Nm)10Nm10Nm
Speed (r/min)17r/min17r/min
Operation TimeS2 4minS2 4min
Insulation ClassHH
IP RatingIP44IP44
Compatible Tube DiameterØ35mm (for 40/45/47/50mm tubes)Ø35mm (for 40/45/47/50mm tubes)
Weight1.55kg1.58kg
CertificationCECE
Battery IncludedNoNo

5. Setup and Installation

5.1 Pre-installation Checklist

  • Ensure you have all necessary components: tubular motor, driving tube (compatible with Ø35mm motor), drive adapter, wall bracket, idler bracket, fabric, and bottom beam.
  • Verify the power supply matches the motor's requirements (220V/230V, 50/60Hz).
  • Determine the installation type: outer (outside the window frame) or built-in (inside the window frame).

5.2 Installation Steps

  1. Prepare the Driving Tube: Insert the motor into the driving tube. Ensure a snug fit. The motor is designed for Ø35mm tubes and is compatible with 40mm, 45mm, 47mm, and 50mm tubes.
  2. Attach Brackets: Secure the wall bracket and idler bracket to the desired installation location.
  3. Mount the Motor Assembly: Place the motor-equipped driving tube onto the installed brackets.
  4. Attach Fabric and Bottom Beam: Secure the blind fabric to the driving tube and attach the bottom beam.
  5. Connect Wiring: Refer to the specific wiring diagrams for DM35R or DM35S models in Section 6.
Diagram showing components of a rolling blind system with a tubular motor

Figure 4: Exploded view of a rolling blind system, illustrating the tubular motor, drive adapter, wall bracket, idler bracket, driving tube, fabric, and bottom beam.

Comparison of outer and built-in installation methods for blinds

Figure 5: Illustration of outer (outside frame) and built-in (inside frame) installation options.

Diagram showing motor inserted into a tube

Figure 6: The tubular motor correctly inserted into the driving tube.

Installation size calculation for blinds

Figure 7: Installation size calculation: Total length = Fabric width + 5.5cm.

6. Wiring Diagrams

6.1 DM35S 10/17 (Standard 4-Wire Motor)

The DM35S motor uses a 4-wire connection. Ensure correct wire pairing for proper operation and safety.

  • Blue Wire: Neutral
  • Brown Wire: Live 1 (e.g., for one direction of movement)
  • Black Wire: Live 2 (e.g., for the opposite direction of movement)
  • Green/Yellow Wire: Earth Ground
DM35S 10/17 4-wire motor wiring diagram

Figure 8: DM35S 10/17 4-wire motor wiring diagram. Blue is Neutral, Brown is Live 1, Black is Live 2, Green/Yellow is Earth.

DM35S 10/17 motor label with wiring diagram

Figure 9: DM35S 10/17 motor label showing detailed specifications and a simplified wiring diagram.

6.2 DM35R 10/17 (Radio Tubular Motor)

The DM35R motor has a built-in RF433MHz receiver and is controlled wirelessly. It requires a direct power connection.

DM35R 10/17 remote control and power connection diagram

Figure 10: DM35R 10/17 setup with remote control (DC863 wall switch, DC305 handheld remote) and direct power connection.

DM35R 10/17 motor label with specifications

Figure 11: DM35R 10/17 motor label showing detailed specifications.

6.3 DM35S Control Solutions

For the DM35S 4-wire motor, several control solutions are available:

  • Solution 1: DM35S motor + mechanical switch.
  • Solution 2: DM35S motor + wall switch with receiver (e.g., DC227A) + Hand-operate remote controller (e.g., DC2700).
  • Solution 3: DM35S motor + Tuya EU type WiFi wall switch.
  • Solution 4: DM35S motor + Tuya DIY WiFi switch.
DM35S 4-wire motor installation solutions

Figure 12: DM35S 4-wire motor installation solutions, including mechanical switch and RF433 remote control options.

7. Operation

7.1 Limit Adjustment

The motor's upper and lower travel limits can be adjusted using the provided limit adjustment tool. Insert the tool into the designated holes on the motor head and turn to set the desired stop positions. The adjustment holes are typically marked with arrows indicating direction of adjustment.

Close-up of motor head with limit adjustment screws

Figure 13: Motor head showing the limit adjustment screws (red and white holes).

7.2 Remote Control (DM35R)

For DM35R models, use a compatible RF433MHz remote control (e.g., Dooya DC2700, DC2702D, or DC305) or a wall switch (e.g., DC863) to operate the blinds. The remote controls typically have buttons for UP, DOWN, and STOP.

Dooya remote control models DC2700 and DC2702D

Figure 14: Examples of Dooya remote controls (DC2700 and DC2702D) for the DM35R motor.

8. Maintenance

  • Regularly inspect the motor and wiring for any signs of wear, damage, or loose connections.
  • Keep the motor and surrounding area clean and free from dust and debris.
  • Do not attempt to lubricate the motor or internal components unless specifically instructed by the manufacturer.
  • If any issues arise, refer to the troubleshooting section or contact customer support.

9. Troubleshooting

ProblemPossible CauseSolution
Motor does not respond to control.No power, loose wiring, remote control battery low (DM35R), remote not paired (DM35R).Check power supply. Verify wiring connections. Replace remote battery. Re-pair remote control (refer to remote manual).
Motor runs in one direction only.Incorrect wiring for direction control (DM35S), limit switch issue.Review wiring diagram for DM35S. Check limit switch settings.
Motor stops prematurely or does not reach full travel.Limit settings incorrect, obstruction.Adjust upper/lower travel limits using the adjustment tool. Check for any physical obstructions.
Motor makes unusual noises.Internal mechanical issue, motor overloaded.Discontinue use and contact customer support. Ensure the blind system is not overloaded.

10. User Tips

  • When selecting a motor, consider the torque (10Nm for these models) to ensure it is sufficient for the size and weight of your blinds.
  • For DM35S models, explore smart home integration options like Tuya WiFi switches for enhanced control and automation.
  • Always test the motor's limits and functionality thoroughly after installation and before regular use.

11. Warranty and Support

For warranty information, please refer to the terms and conditions provided at the time of purchase or contact your seller directly. If you encounter any issues that cannot be resolved using this manual, please reach out to the seller's customer support for assistance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.