PowMr POW-HVM4.5K-24V

Contents

PowMr 4500W 24V Hybrid Inverter User Manual

Model: POW-HVM4.5K-24V | Brand: PowMr

1. Introduction

The PowMr POW-HVM4.5K-24V is an all-in-one hybrid solar inverter designed for various home applications. It integrates a 150A MPPT solar charge controller, a 4500W pure sine wave inverter, and a battery charger into a single unit. This inverter features a sleek design with a tempered glass panel and touch screen buttons for easy operation. It supports a wide photovoltaic input range and offers multiple protection mechanisms to ensure reliable and safe operation.

Key Features:

  • Built-in 150A MPPT charging module.
  • Wide photovoltaic input voltage range (55-450V).
  • Maximum solar array capacity of 6000W.
  • Suitable for 24V systems.
  • Maximum AC output power of 4500W (4500VA) with a power factor of 1.0.
  • Built-in lithium battery activation function.
  • Multiple protection mechanisms for enhanced safety.

Applications:

  • Industrial automation equipment pressure monitoring
  • Hydraulic and pneumatic systems
  • Air compressors, water pumps, pressure pipelines
  • Air conditioning, refrigeration, HVAC systems
  • Liquid level measurement and control
  • Intelligent instruments and environmental equipment

Video: Overview of the PowMr Hybrid Inverter, highlighting its design, MPPT charging module, PV input range, AC output, and battery activation function.

2. Specifications

AttributeValue
ModelPOW-HVM4.5K-24V
Rated Power4500W
Input Voltage220V
Output Voltage WaveformPure Sine Wave
Output Voltage24V
Output Current80A
Output Frequency50Hz/60Hz
Output TypeSingle Phase
TypeDC/AC Inverters
Inverter Efficiency94%
CertificateCE
Weight7.5KG
Size46.8*31.8*15.9 cm
Battery IncludedNo
High-concerned chemicalNone
OriginMainland China
Place of OriginGuangdong, China
Multiple views of the PowMr Hybrid Inverter, showing front, back, sides, top, and bottom panels with various ports and controls.

Image: Various views of the PowMr Hybrid Inverter.

3. Installation Instructions

Proper installation is crucial for the safe and efficient operation of your hybrid inverter. Please read these instructions carefully before proceeding.

General Installation:

  1. Install the inverter in a stable position without strong vibration or impact.
  2. Use standard threaded installation; tighten evenly. Do not knock the inverter.
  3. Ensure the measured medium (if applicable for pressure sensing) is non-corrosive and compatible with the inverter.
  4. Do not apply long-term over-range pressure to avoid permanent damage.

Wiring (3-Wire System):

Always disconnect power before wiring to prevent damage to the module or personal injury. Reverse wiring may damage the inverter.

  • VCC: Positive power supply (5V / 12V / 24V DC)
  • GND: Negative power supply / Ground
  • OUT: Signal output
Detailed wiring diagram for the PowMr Hybrid Inverter, showing connections for PV input, AC input/output, battery, and communication ports.

Image: Wiring diagram for the PowMr Hybrid Inverter. Refer to this diagram for correct electrical connections.

For detailed wiring instructions and safety precautions, please consult the full user manual PDF.

4. Operating Instructions

The PowMr Hybrid Inverter features a user-friendly interface with a display and touch screen buttons (ESC, UP, DOWN, ENTER) for navigation and settings adjustment.

For comprehensive operating procedures, including initial setup, mode selection, and monitoring, please refer to the official user manual PDF. The PDF contains detailed step-by-step guides and explanations of all functions.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your PowMr Hybrid Inverter.

General Maintenance Tips:

  • Keep the inverter away from strong electromagnetic interference sources.
  • Ensure the inverter is installed in a well-ventilated area to prevent overheating.
  • Periodically inspect all connections for tightness and signs of corrosion.
  • Keep the unit clean and free from dust and debris.

For detailed maintenance schedules and procedures, please consult the full user manual PDF.

6. Troubleshooting

The PowMr Hybrid Inverter is equipped with multiple internal protection mechanisms. In case of an error or malfunction, the display may show an error code or fault indicator.

Safety Notes:

  • This product is NOT explosion-proof. Do not use in flammable or explosive environments.
  • Do not disassemble or modify the product by yourself; this will void the warranty and could lead to electric shock or damage.
  • Always disconnect power before attempting any inspection or troubleshooting.

For a comprehensive list of error codes, troubleshooting steps, and solutions, please refer to the dedicated troubleshooting section in the official user manual PDF.

7. User Tips

  • For visual guidance on installation, assembly, and operation, refer to the official teaching videos provided by the manufacturer. These videos can clarify complex steps.

8. Warranty and Support

Warranty:

This product comes with a 12-month warranty from the date of purchase. The warranty covers non-human quality defects. Any unauthorized disassembly or modification will void the warranty.

Technical Support:

Professional technical support is available for wiring and application assistance. For any issues or questions, please contact the manufacturer's customer service.

Additional Resources:

A detailed user manual in PDF format is available for download. This document contains comprehensive information on product introduction, technical parameters, installation, operation, maintenance, and troubleshooting.

View User Manual (PDF)

Image showing various product certifications such as CE.

Image: Product Certifications.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.