ToupTek G3M178C

Contents

ToupTek G3M178C Astronomical Camera User Manual

Model: G3M178C | Brand: ToupTek

1. Introduction

The ToupTek G3M178C is a versatile astronomical camera designed for guiding, planetary imaging, and general astronomical photography. It features a SONY IMX178 Color CMOS sensor, USB3.0 for high-speed data transmission, and a built-in ST4 autoguiding interface. This camera offers high sensitivity and low noise, providing performance comparable to astronomical cameras equipped with CCD image sensors.

ToupTek G3M178C Astronomical Camera
Figure 1: ToupTek G3M178C Astronomical Camera

A blue cylindrical camera with a black eyepiece adapter, labeled "ToupTek Astro G3M178C".

2. Package Contents

Please check the package carefully to ensure all items are present and in good condition.

  • Camera Body (G3M178C)
  • 1.25" Extender
  • USB3.0 Cable
  • 2.0m ST4 Auto Guiding Cable
Package Contents
Figure 2: Items included in the box

An image displaying the camera body, a 1.25" extender, a USB3.0 cable, and a 2.0m ST4 auto guiding cable.

3. Specifications

The following table details the technical specifications of the ToupTek G3M178C camera:

FeatureSpecification
Order CodeG3M178C
Sensor Model6.3M/IMX178(C) SONY IMX178Color CMOS
Sensor Size1/1.8" (7.4x5.0)
Pixel Size2.4µm x 2.4µm
Resolution3096x2080
ADC14bit
Dynamic Range82dB
G Sensitivity425mv with 1/30s
FPS/Resolution60fps @ 3096x2080
Average Sampling1x1, 2x2
Exposure Time0.244ms ~ 1000s
QE (Quantum Efficiency)>81%
Full Well Capacity10.7ke-
Max SNR40dB
Read Noise2.2-1.4e-
Diagonal8.92mm
Detailed Camera Specifications
Figure 3: Detailed specifications of the G3M178C camera.

An infographic showing various technical specifications like sensor type, image area, resolution, ADC, pixel size, USB type, dynamic range, FPS, QE, full well, max SNR, and read noise.

Optical Format Details
Figure 4: 1/1.8 inch optical format details.

A diagram illustrating the 1/1.8 inch optical format, showing the CMOS sensor, resolution, pixel size, and diagonal measurement.

Relative Response Graph
Figure 5: Relative response of the sensor across different wavelengths.

A graph showing the relative response of the Red, Green, and Blue channels of the sensor against wavelength in nanometers.

4. Setup

4.1 Physical Connection to Telescope

The G3M178C camera can be directly inserted into a standard 1.25" focuser. For a wider adaptable focal length without increasing the optical distance, use the provided 1.25" extender.

Camera with 1.25 inch Extender
Figure 6: G3M178C camera with the 1.25" extender attached.

The blue camera body with a black extender piece, showing the "CS" marking on the extender.

Extender Dimensions
Figure 7: Dimensions of the 1.25" extender.

A technical drawing showing the dimensions of the extender, including 1" (32), 1.125" (42), 1.25", and a length of 20mm.

Mechanical Drawing of Camera
Figure 8: Mechanical drawing with optical distance and dimensions.

A detailed mechanical drawing of the camera, showing optical distances (12.6±0.2 and 17.6±0.2), diameters (Ø31.7, Ø37), and various lengths (16.8, 20, 44.6, 72.4, 87.4). Also shows top and bottom views with USB3.0 and Guide ports, and the 1"-32 UNF-2B thread.

4.2 Computer and Autoguider Connection

Connect the camera to your computer using the provided USB3.0 cable for video transmission. For autoguiding, connect the ST4 auto guiding cable from the camera's "Guide" port to your autoguiding mount.

Camera Interface Display
Figure 9: Camera interface showing USB3.0 and ST4 ports.

A close-up view of the camera's rear interface, highlighting the ST4 Interface (labeled "Guide") and the USB3.0 Interface.

4.3 Software Installation

Before connecting the camera to your computer, install the necessary drivers and imaging software. Refer to the software package or manufacturer's website for the latest drivers and recommended astronomy imaging applications (e.g., SharpCap, FireCapture, PHD2 for guiding).

5. Operating Instructions

5.1 Planetary Imaging

For planetary imaging, the G3M178C's high frame rate (60fps at full resolution) is ideal for capturing short videos. Use imaging software to record AVI or SER files, then stack the best frames to achieve sharp planetary details.

  • Set exposure time to capture bright details without overexposing.
  • Adjust gain to balance signal and noise.
  • Utilize the high FPS to capture many frames quickly, minimizing atmospheric distortion.

5.2 Autoguiding

The built-in ST4 interface allows direct connection to compatible equatorial mounts for precise autoguiding. Use software like PHD2 to calibrate and guide your telescope, ensuring sharp, un-trailed long-exposure astrophotography.

  • Connect the ST4 cable from the camera to the mount's autoguider port.
  • Select the camera and mount in your guiding software.
  • Perform calibration as per the guiding software's instructions.
  • Start guiding to correct for tracking errors during long exposures.

5.3 Deep Sky Photography

While primarily a planetary and guide camera, the G3M178C's high sensitivity and low read noise make it suitable for capturing brighter deep-sky objects. Experiment with longer exposure times (up to 1000s) and appropriate gain settings.

6. Maintenance

  • Cleaning the Sensor Window: If dust appears on your images, carefully clean the sensor's protective window using a specialized optical cleaning kit (e.g., sensor cleaning swabs and solution). Avoid touching the sensor directly.
  • Exterior Cleaning: Wipe the camera body with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
  • Storage: When not in use, store the camera in a dry, dust-free environment, preferably in its original packaging or a padded case. Use the provided dust caps to protect the optical window and ports.
  • Avoid Moisture: Keep the camera away from moisture and extreme temperatures.

7. Troubleshooting

  • Camera Not Detected:
    • Ensure the USB3.0 cable is securely connected to both the camera and the computer.
    • Try a different USB port or cable.
    • Verify that the camera drivers are correctly installed. Check Device Manager (Windows) for any unrecognized devices.
    • Restart your computer and imaging software.
  • No Image or Black Screen:
    • Check the exposure settings in your software. Ensure exposure time is adequate and gain is not too low.
    • Verify that the telescope's dust cap is removed and the focuser is properly adjusted.
    • Ensure the camera is correctly focused.
  • Guiding Errors:
    • Check the ST4 cable connection between the camera and the mount.
    • Recalibrate the guiding software.
    • Ensure the guide scope is in focus and a suitable guide star is selected.

8. User Tips

  • For optimal planetary imaging, capture hundreds or thousands of frames and use stacking software (e.g., AutoStakkert!, Registax) to combine them into a single, sharp image.
  • When autoguiding, ensure your guide scope is rigidly mounted and well-aligned with your main telescope to prevent flexure.
  • Experiment with different gain and exposure settings to find the best balance for your target object and sky conditions.

9. Warranty and Support

ToupTek products are manufactured to high-quality standards. For warranty information and technical support, please contact your authorized dealer or the ToupTek customer service directly. Keep your purchase receipt as proof of purchase.

ToupTek Letter of Authorization
Figure 10: Example Letter of Authorization for ToupTek products.

A certificate indicating authorization for sales of ToupTek non-research grade astronomical products.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.