STARTRC S8

Contents

STARTRC S8 FPV Drone Training Simulator Remote Control Handle User Manual

Model: S8

Introduction

This manual provides essential information for the safe and effective use of your STARTRC S8 FPV Drone Training Simulator Remote Control Handle. Please read it thoroughly before use to ensure proper setup and operation.

Safety Information

⚠️ For recreation use only. Illegal modification of drones/planes is prohibited. Please also pay attention to the relevant laws and regulations on the use of drones/planes in your country/area to ensure legal use.

Package Contents

Please verify that all items listed below are included in your package:

  • Flight Simulator Controller × 1
  • Metal Joysticks × 2
  • USB Type-C to USB-A Cable × 1
  • Chinese and English User Manual × 1
Package contents of the STARTRC S8 FPV Drone Training Simulator, showing the controller, joysticks, USB cable, and manual.
Figure 1: Contents of the STARTRC S8 FPV Drone Training Simulator package.

Product Overview

The STARTRC S8 FPV Drone Training Simulator Remote Control Handle is designed to provide a realistic and immersive FPV drone flight training experience. It features a smooth body design for comfortable grip and precise control, allowing for seamless transitions between virtual and real FPV drone flights.

STARTRC S8 FPV Drone Simulator Remote Control Handle in white, with a computer screen displaying a drone simulator in the background.
Figure 2: STARTRC S8 FPV Drone Training Simulator Remote Control Handle.

Controller Components

Diagram showing the front and rear joysticks of the STARTRC S8 controller with numbered callouts for each component.
Figure 3: Front and Rear Joystick Layout.
  • Front Joystick:
    1. Throttle/Yaw Stick
    2. Pitch/Roll Stick
    3. LED Ring
    4. Power Button
  • Rear Joystick:
    1. Switch A
    2. Switch C
    3. Switch B
    4. Switch D

Setup

  1. Connect the Controller: Use the provided USB Type-C to USB-A cable to connect the STARTRC S8 controller to your computer (Windows, macOS, HarmonyOS) or mobile device (Android, iOS, HarmonyOS). The controller supports hot-plug-and-play functionality.
  2. Driver-Free Installation: The controller is designed for driver-free installation. No additional firmware downloads or installations are required for desktop or laptop use.
  3. Power Supply: The controller utilizes a USB-C PD power supply solution, eliminating the need for batteries and enabling long-duration simulation training.
A white STARTRC S8 controller connected via USB to a laptop, with a desktop computer and monitor in the background displaying a drone simulator. Text indicates 'FPV MADE EASY' and compatibility with Windows, Android, and iOS.
Figure 4: Connecting the STARTRC S8 controller to a computer.

Operating Instructions

  1. Device Recognition: Once connected, the controller should be automatically recognized by your operating system as a game controller or joystick.
  2. Launch Simulator Software: Open your preferred FPV flight simulator application on your PC or mobile device.
  3. Configure Controller: Navigate to the controller settings or input mapping section within your simulator. The STARTRC S8 offers 8-channel PPM signal output. Map the throttle, pitch, roll, and yaw axes, along with the 2 three-position toggle switches and 2 two-position toggle switches, to your desired functions within the simulator.
  4. Start Training: Begin your FPV flight training. The aircraft-grade control system with dual-ball bearing structure and composite damping system accurately replicates dynamic feedback for realistic simulation.
Video 1: Demonstration of connecting and using the STARTRC S8 controller with a drone simulator.

Compatibility

The STARTRC S8 FPV Drone Training Simulator Remote Control Handle offers broad compatibility:

Supported Simulators:

  • Liftoff
  • DRL (Drone Racing League)
  • DCL (Drone Champions League)
  • AI Drone Simulator
  • TRY P FPV
  • Uncrashed
  • Freerider
  • Velocidrone
  • FPV LOGIC
  • SkyDive
  • FPV Worldwide
  • FPV Battleground
  • DJI Virtual Flight (Note: Low-end versions may not be supported)
Image showing the STARTRC S8 controller surrounded by logos of various FPV drone simulators it is compatible with, including Liftoff, DRL, FPV SkyDive, Freerider, and more.
Figure 5: Broad compatibility with FPV drone simulators.

Supported Operating Systems:

  • PC: Windows 10/11, HarmonyOS, macOS Monterey or later.
  • Mobile: Android 8.0+, iOS 14+, HarmonyOS 2.0+.

The controller features a proprietary low-latency communication protocol, ensuring end-to-end operation latency of ≤8ms across compatible platforms.

Specifications

FeatureDetail
Model Numberfpv drone simulator (S8)
Compatible Drone BrandDJI (and other FPV drones)
Compatible Drone ModelDJI Dronee (realistic feel for 30g-800g models)
Size16*12*5cm
Weight162g
Channels8-Channel PPM Signal Output (2x3POS, 2x2POS switches)
Latency≤8ms (end-to-end operation)
Power SupplyUSB-C PD (no batteries required)
Standby Power Consumption<0.03W
Joystick DurabilityOver 2 million impact tests (EN 4678-2018 standard)
Precision0.1° fine-tuning
OriginMainland China

Maintenance

  • Cleaning: Keep the controller clean and dry. Use a soft, dry cloth to wipe down the surface. Avoid using harsh chemicals or abrasive materials.
  • Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures. Ensure joysticks and switches are not under pressure during storage to prevent damage.
  • Handling: Handle the controller with care. Avoid dropping it or subjecting it to strong impacts.

Troubleshooting

  • Controller Not Recognized:
    • Ensure the USB cable is securely connected to both the controller and your device.
    • Try connecting to a different USB port or using an alternative USB Type-C to USB-A cable.
    • Restart your computer or mobile device.
    • Check your device's system settings (e.g., Device Manager on Windows, System Information on macOS) to confirm if the controller is detected.
  • No Response in Simulator:
    • Verify that the STARTRC S8 controller is selected as the primary input device within your simulator's settings.
    • Perform a joystick calibration within the simulator software if the option is available.
    • Ensure your simulator software is updated to the latest version.
  • Input Lag or High Latency:
    • Confirm that your computer or mobile device meets the minimum system requirements for the FPV simulator you are using.
    • Close any unnecessary applications running in the background to free up system resources.
    • For mobile devices, ensure a stable connection and sufficient processing power.

User Tips

  • For optimal performance and access to the latest features, ensure your FPV simulator software is always updated.
  • Experiment with different joystick tension settings within your simulator to find what feels most comfortable and responsive for your personal flying style.
  • Utilize the custom auxiliary channel functions to map frequently used commands or flight modes for a more efficient and personalized training experience.

Certifications

The STARTRC S8 FPV Drone Training Simulator Remote Control Handle is certified with CE, FCC, PSE (EMC), and CPSC (CPC) compliance, and meets ROHS 2.0 certification standards.

Warranty and Support

For technical support, warranty claims, or further assistance with your STARTRC S8 FPV Drone Training Simulator Remote Control Handle, please contact STARTRC Official Store customer service through their official channels.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.