RUNNING PANTHER Motorcycle Rear Short Tail License Plate Holder

1. Introduction

Thank you for choosing the RUNNING PANTHER Motorcycle Rear Short Tail Stock License Plate Holder. This product is designed to provide a shorter, more stable, and brighter solution for your motorcycle's rear end, enhancing both aesthetics and safety. Crafted from high-quality CNC aluminum, it offers durability and resistance to various environmental conditions. This manual will guide you through the product's features, specifications, and general care.

2. Safety Information

• Always ensure the motorcycle is stable and turned off before beginning any installation or maintenance.
• Wear appropriate safety gear, including gloves and eye protection, during installation.
• If you are unsure about any step of the installation process, seek professional assistance from a qualified motorcycle mechanic.
• Ensure all fasteners are tightened securely to prevent parts from loosening during operation.
• Regularly inspect the license plate holder and its components for any signs of wear, damage, or loose connections.

3. Specifications

4. Package Contents

Upon opening the package, please verify that all components are present and undamaged:

• 1 x RUNNING PANTHER Motorcycle Rear Short Tail License Plate Holder
• 1 x LED Number Plate Lighting unit
• Necessary mounting hardware (screws, nuts, washers)

Note: The product does not include detailed installation instructions in the package. Please refer to the 'Setup' section of this manual for general guidance or contact customer service for assistance.

5. Setup and Installation

This license plate holder is designed for the Aprilia RS457 2024-UP models. It is engineered to utilize existing mounting points on your motorcycle, generally not requiring modifications to the bike's frame. The original turn signals can typically be reused with this holder.

5.1. Pre-Installation Check

• Ensure your motorcycle is parked on a stable, level surface and the engine is off and cool.
• Gather all tools required (e.g., wrenches, screwdrivers, wire cutters/strippers for electrical connections).
• Review the components provided in the package.

5.2. Installation Steps (General Guidance)

1. Remove Original Components: Carefully remove the existing stock license plate holder and any associated components (e.g., fender, turn signals, license plate light) from your Aprilia RS457. Disconnect any electrical wiring for lights.
2. Mount the New Holder: Position the RUNNING PANTHER license plate holder onto the motorcycle's rear. Align it with the reserved installation locations.
3. Secure the Holder: Use the provided mounting hardware to securely fasten the new holder to the motorcycle. Ensure all bolts are tightened to the manufacturer's recommended torque specifications (if available, otherwise hand-tighten firmly).
4. Install LED Lighting: The LED number plate lighting is integrated into the design. Connect its wiring to the motorcycle's electrical system, typically tapping into the original license plate light wiring. Ensure proper polarity.
5. Install Turn Signals: If reusing original turn signals, mount them onto the designated points on the new holder. Connect their wiring to the motorcycle's turn signal circuits.
6. Attach License Plate: Secure your license plate to the holder using appropriate fasteners.
7. Final Check: Verify that all components are securely mounted, and all electrical connections are functional (license plate light, turn signals).

Visual Reference:

6. Operating Instructions

The RUNNING PANTHER license plate holder itself does not require specific operational steps beyond its installation. Its primary function is to securely hold your license plate and provide integrated LED lighting for visibility.

6.1. LED Lighting

The integrated LED number plate lighting is designed to activate with your motorcycle's existing lighting system. When your motorcycle's lights are on, the LED lighting on the holder should illuminate, providing enhanced visibility for your license plate, especially at night or in low-light conditions.

6.2. Turn Signals

If you have connected your original turn signals to the reserved locations on the new holder, they will operate as normal, providing clear signaling for other road users.

7. Maintenance and Care

To ensure the longevity and optimal performance of your RUNNING PANTHER license plate holder, follow these maintenance guidelines:

• Regular Cleaning: Clean the holder regularly with a soft cloth and mild soap and water. Avoid abrasive cleaners or solvents that could damage the finish.
• Inspection: Periodically check all mounting bolts and screws for tightness. Vibrations from riding can cause fasteners to loosen over time.
• Electrical Connections: Inspect the wiring for the LED lighting and turn signals for any signs of fraying, corrosion, or loose connections. Ensure they are properly insulated and secured.
• Material Durability: The holder is made from CNC Aviation Grade Aluminum with anti-corrosion treatment, making it resistant to weathering and harsh conditions. However, extreme impacts should be avoided.
• Waterproof Design: The product features a waterproof design, adapting to various weather conditions. While designed to withstand water exposure, avoid high-pressure washing directly on electrical components.

8. Troubleshooting

9. User Tips

• Consider using a small amount of dielectric grease on electrical connections to prevent corrosion, especially if riding in wet conditions frequently.
• Before riding, always do a quick visual check of your license plate holder and lights to ensure everything is secure and functional.

10. Warranty and Support

For any questions regarding installation, operation, or potential issues, please contact RUNNING PANTHER customer service. Keep your purchase receipt as proof of purchase for any warranty claims.

Contact Information: Please refer to the seller's store page or your purchase platform for the most up-to-date customer service contact details.

Product Video Overview: