iScooter W6

Contents

iScooter W6 Electric Scooter User Manual

Model: W6

1. Introduction

Thank you for choosing the iScooter W6 Electric Scooter. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your scooter. Please read it thoroughly before your first ride and keep it for future reference.

iScooter W6 Electric Scooter with key features
Figure 1: iScooter W6 Electric Scooter highlighting 36V7.8Ah battery, 25-30km range, 35km/h max speed, and 500W motor.

Safety Disclaimer

⚠️ Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.

2. Package Contents

Ensure all items are present and in good condition upon unboxing. If anything is missing or damaged, please contact customer service.

iScooter W6 Package Contents
Figure 2: Package contents including the scooter, instruction manual, European standard cable, L-type hexagonal wrench, stand screws, charger, inflatable inner tube, and extension tube.
  • iScooter W6 Electric Scooter
  • Instruction Manual
  • European Standard Charging Cable
  • Charger (Output: DC 42V 1.5A)
  • L-type Hexagonal Wrench
  • Stand Screws (6 pieces, including 2 spares)
  • Inflatable Inner Tube
  • Extension Tube

3. Setup and First Use

3.1 Unfolding the Scooter

The iScooter W6 features a two-step quick folding mechanism for portability. To unfold:

  1. Place the scooter on a flat surface.
  2. Release the folding buckle/knob located on the stem.
  3. Carefully lift the stem until it locks into the upright position. Ensure the locking mechanism is securely engaged.
  4. Adjust the handlebars if necessary.
Scooter Fast Folding Mechanism
Figure 3: Demonstration of the scooter's fast folding mechanism, showing its compact size for easy transport and storage.

3.2 Initial Charging

Before your first ride, fully charge the scooter's battery.

  1. Locate the charging port on the scooter (refer to Product Overview diagram).
  2. Connect the charger to the charging port, then plug the charger into a power outlet (AC100-240V 50/60Hz).
  3. The charging indicator on the charger will show the charging status (e.g., red for charging, green for fully charged).
  4. Charging time is approximately 5-6 hours. Do not overcharge.
Scooter Battery and Charging Port
Figure 4: View of the scooter's battery compartment and charging port, indicating an output of 42V 1.5A and a charging time of 5-6 hours.

3.3 Voltix APP Smart Connection

Enhance your riding experience by connecting your iScooter W6 to the Voltix APP.

  1. Download the Voltix APP from your smartphone's app store.
  2. Turn on your scooter and enable Bluetooth on your smartphone.
  3. Open the Voltix APP and follow the on-screen instructions to pair with your iScooter W6.
  4. The app allows you to record rides, control cruise settings, monitor battery usage, adjust acceleration, and utilize intelligent locking functions.
Voltix APP Smart Connection
Figure 5: Smartphone displaying the Voltix APP interface, showing features like ride record, cruise control, battery usage, acceleration settings, and intelligent locking.

4. Operating Instructions

4.1 Product Overview and Controls

Familiarize yourself with the scooter's components and controls:

iScooter W6 Product Overview
Figure 6: Labeled diagram of the iScooter W6, indicating the display, throttle, headlight, bell, brake lever, folding buckle, hanger, stem, charging port, rear fender, hook, taillight & brake light, disc brake, and kickstand.

4.2 LCD Intelligent Riding Display

The handlebar display provides real-time information:

LCD Intelligent Riding Display
Figure 7: Close-up of the LCD display showing real-time speed, speed unit, riding mode, cruise control, app connection status, headlight status, motor overheating warning, battery level, and error prompt.
  • Real-time Speed: Current riding speed.
  • Speed Unit: Displays speed in km/h.
  • Riding Mode: Indicates the selected speed mode (Walk, ECO, D, S).
  • Cruise Control: Icon illuminates when cruise control is active.
  • App Connected: Icon indicates successful connection to the Voltix APP.
  • Headlight On: Icon illuminates when the headlight is active.
  • Motor Overheating: Warning icon for motor temperature.
  • Battery Level: Graphical representation of remaining battery charge.
  • Error Prompt: Indicates system errors.

4.3 Speed Modes

The iScooter W6 offers multiple speed modes to suit different riding environments:

Speed Mode Demonstration Interface
Figure 8: Visual representation of the four speed modes: Walk (6KM/H), ECO (15KM/H), D (25KM/H), and S (35KM/H).
  • Walk Mode: Approximately 6 KM/H (original speed).
  • ECO Mode: Approximately 15 KM/H.
  • D Mode: Approximately 25 KM/H.
  • S Mode: Approximately 35 KM/H (post-cracking speed).

To switch modes: Simply short-press the power button multiple times at startup to cycle through the modes.

To break the speed limit (activate S Mode): After turning on the device, hold the brake handle and press the power button 5 times.

4.4 Braking System

The scooter is equipped with a dual braking system for safety:

  • Front Electronic Brake: Controlled by the left brake lever.
  • Rear Wheel Disc Brake: A ventilated disc brake with E-ABS anti-lock system, providing quick response and efficient braking.
Front Electronic Brake and Rear Wheel Disc Brake
Figure 9: Close-up images of the electronic brake lever and the rear disc brake system.

4.5 Lights

The scooter features front LED headlights and a rear warning light for visibility.

Front LED Headlights and Rear Warning Light
Figure 10: Images showing the illuminated front LED headlights and the rear warning light.

5. Maintenance

5.1 General Cleaning

Regularly clean your scooter with a damp cloth. Do not use high-pressure water jets or corrosive cleaning agents. Ensure the charging port cover is securely closed before cleaning.

5.2 Tire Care

The iScooter W6 is equipped with 10-inch wear-resistant pneumatic tires designed for durability and a smooth ride.

10 Inch Wear-Resistant Pneumatic Tire
Figure 11: Cross-section view of the 10-inch pneumatic tire, showing the rubber anti-puncture layer, inner liner layer, and anti-puncture protective layer.
  • Regularly check tire pressure and inflate to the recommended PSI (check tire sidewall for specific pressure).
  • Inspect tires for wear, cuts, or punctures before each ride.
  • Use the provided extension tube for easier inflation.

5.3 Battery Maintenance

The scooter features a 36V 7.8Ah battery with a BMS (Battery Management System) for 6-layer safety protection.

  • Always use the original charger provided.
  • Do not charge the battery in extreme temperatures.
  • Store the scooter in a cool, dry place when not in use, and ensure the battery is partially charged (e.g., 50-70%) if storing for extended periods.
  • Avoid fully discharging the battery frequently.

5.4 Brake System Check

  • Regularly inspect the brake levers and cables for proper function and tension.
  • Check the disc brake for wear and ensure it operates smoothly.
  • If you notice any issues with braking performance, have the scooter inspected by a qualified technician.

6. Troubleshooting

This section addresses common issues you might encounter with your iScooter W6.

ProblemPossible CauseSolution
Scooter does not turn onLow battery; Power button not pressed correctly; System malfunctionCharge the battery; Press and hold the power button for a few seconds; Contact customer support if issue persists.
Motor Overheating warning on displayProlonged uphill riding; Heavy load; High ambient temperatureStop riding and allow the motor to cool down; Reduce load or avoid steep inclines.
Reduced range or speedLow tire pressure; Battery degradation; Riding conditions (uphill, heavy load, strong winds)Check and inflate tires; Ensure battery is fully charged; Adjust riding style.
Brakes feel loose or ineffectiveBrake cable tension; Worn brake pads; Disc brake misalignmentAdjust brake cable tension; Inspect brake pads for wear and replace if necessary; Seek professional service.
App connection issuesBluetooth off; App not updated; Scooter not in pairing modeEnsure Bluetooth is on and scooter is powered; Update Voltix APP; Restart scooter and app.

For any issues not covered here or if problems persist, please contact customer service.

7. Specifications

Key technical specifications for the iScooter W6 Electric Scooter:

iScooter W6 Product Specifications
Figure 12: Detailed product specifications for the iScooter W6.
FeatureDetail
Model NumberiScooter W6
Motor Power500W (Brushless)
Battery Capacity36V 7.8Ah
Max Speed35 KM/H
Max Range30 KM
Charging Time5-6 Hours
Input VoltageAC100-240V 50/60Hz
Output Voltage (Charger)DC 42V 1.5A
Tire Size10 inch (Wear-Resistant Pneumatic)
Braking SystemFront Electronic Brake & Rear Disc Brake (E-ABS)
Max Incline15°
Unfolded Size112 x 49 x 111 cm
Folded Size112 x 49 x 47 cm
Net Weight15 kg
CertificationCE
Applicable PeopleUnisex
ConnectivityVoltix APP Smart Connection
iScooter W6 Product Size Diagram
Figure 13: Diagram illustrating the unfolded dimensions of the iScooter W6: 111cm height, 49cm width, and 112cm length.
W6 500W High Speed Brushless Motor
Figure 14: Image highlighting the 500W brushless motor, 35KM/H max speed, and 15° max incline capability.

8. User Tips

  • Unboxing Video: It is recommended to take an unboxing video when disassembling the parcel. This can help protect your rights and interests in case of any issues.
  • Regular Checks: Before each ride, quickly check tire pressure, brake function, and ensure all folding mechanisms are securely locked.
  • App Features: Explore the Voltix APP to customize your riding experience, track your journeys, and monitor scooter diagnostics.
  • Riding Conditions: Be mindful of riding conditions. Factors like rider weight, terrain, incline, and temperature can affect range and speed.
  • Protective Gear: Always wear appropriate protective equipment, including a helmet, knee pads, and elbow pads, especially when riding at higher speeds.

9. Warranty and Support

For any product-related issues, warranty claims, or technical support, please contact the seller's customer service. When contacting support, please provide your purchase details and a clear description of the problem. It is helpful to have your unboxing video and any relevant photos or videos of the issue ready.

The seller commits to responding quickly and assisting in resolving any problems you encounter.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.