DDPAI Dash Cam Smart Hardwire Kit User Manual

1. Introduction

The DDPAI Smart Hardwire Kit is designed to provide continuous power to your DDPAI dash cam, enabling 24-hour parking monitoring and protecting your vehicle's battery. This kit features multiple safety protections and intelligent power management for reliable operation.

Package Contents:

• DDPAI Smart Hardwire Kit (cable with power module)
• Fuse Taps
• Wrench
• User Manual

2. Specifications

3. Setup and Installation

The DDPAI Smart Hardwire Kit is designed for simple installation, eliminating the need for a car cigarette lighter socket and providing a cleaner look for your car's interior.

Installation Steps:

1. Identify Fuse Box: Locate your car's fuse box. Its location may vary depending on the car brand and model.
2. Connect Ground Wire (GND): Connect the black wire (GND) to a metal part of the car chassis, typically a bolt or screw, to ensure a proper ground connection.
3. Connect ACC Wire: Connect the red wire (ACC) to a fuse that is only powered when the car's ignition is on. This allows the dash cam to detect when the vehicle is running.
4. Connect BAT Wire: Connect the yellow wire (BAT) to a fuse that has constant power, even when the car is off. This provides continuous power for parking monitoring.
5. Route Cable: Carefully route the 3.2-meter Type-C USB cable from the fuse box to your dash cam, ensuring it is tucked away neatly and does not obstruct driving.
6. Connect to Dash Cam: Plug the Type-C USB connector into your DDPAI dash cam.

Important Note:

Always consult your vehicle's owner's manual or a professional for specific fuse box locations and safe wiring practices. Incorrect wiring can damage your vehicle's electrical system or the dash cam.

4. Operating Instructions

Once correctly installed, the DDPAI Smart Hardwire Kit will automatically manage power to your dash cam based on your vehicle's status.

Automatic Parking Monitoring:

The kit intelligently recognizes vehicle status. When your car is parked and the ignition is off, the hardwire kit will enable 24-hour parking monitoring mode on your compatible DDPAI dash cam. This typically involves time-lapse recording or event-based recording to conserve power.

Intelligent Power Management (IPS):

The integrated IPS management system ensures efficient power delivery and protection for both your dash cam and car battery.

Low Voltage Protection:

To prevent draining your car's battery, the hardwire kit features low voltage protection. It will automatically cut off power to the dash cam if the car battery voltage drops below a preset threshold (e.g., 11.8V, 12V, or 12.4V). This ensures enough power remains to start your vehicle.

5. Safety Features and Protections

The DDPAI Smart Hardwire Kit incorporates multiple layers of protection to ensure the safety and longevity of your dash cam and vehicle's electrical system.

• Overload Protection: Prevents damage from excessive current draw.
• Low Voltage Protection: Automatically cuts off power to prevent car battery drain.
• Short Circuit Protection: Safeguards against electrical shorts.
• Over Current Protection: Protects against current surges.
• Reverse Connection Protection: Prevents damage from incorrect wiring polarity.
• Battery Drain Protection: Specifically designed to monitor and protect your car's battery during parking mode.
• Overheat Protection: Monitors the device temperature to prevent overheating.

6. Maintenance

The DDPAI Smart Hardwire Kit requires minimal maintenance. Follow these guidelines to ensure optimal performance:

• Regular Checks: Periodically check the wiring connections to ensure they are secure and free from corrosion.
• Cable Integrity: Inspect the cable for any signs of wear, cuts, or damage. Replace if necessary.
• Cleanliness: Keep the power module and connections free from dust and debris.
• Firmware Updates: Ensure your DDPAI dash cam's firmware is up to date, as this may include improvements related to hardwire kit compatibility and power management.

7. Troubleshooting

If you encounter issues with your DDPAI Smart Hardwire Kit, refer to the following troubleshooting tips:

Dash Cam Not Powering On:

• Check Connections: Ensure all wires (GND, ACC, BAT, and Type-C USB) are securely connected.
• Fuse Check: Verify that the fuses used for ACC and BAT connections are not blown. Replace if necessary.
• Vehicle Battery: Check your car's battery voltage. If it's too low, the hardwire kit's low voltage protection might have activated.
• Dash Cam Functionality: Test your dash cam with a standard car charger to rule out issues with the dash cam itself.

Parking Monitor Not Working:

• ACC/BAT Wiring: Double-check that the ACC and BAT wires are connected to the correct fuse types (ACC to ignition-switched, BAT to constant power).
• Dash Cam Settings: Ensure parking monitoring mode is enabled in your DDPAI dash cam's settings.
• Low Voltage Cut-off: If your car battery is frequently low, the hardwire kit might be cutting power prematurely. Consider adjusting the low voltage cut-off setting if your dash cam or hardwire kit allows it, or have your car battery checked.

Intermittent Power:

• Loose Connections: Inspect all connections for looseness.
• Damaged Cable: Check the hardwire cable for any visible damage.

8. Warranty and Support

For warranty information and technical support, please refer to the official DDPAI website or contact their customer service directly. Keep your purchase receipt as proof of purchase.

DDPAI Contact Information:

• Website: www.ddpai.com
• Email: feedback@ddpai.com

9. User Tips

• Compatibility: This hardwire kit is compatible with DDPAI dash cams that use a Type-C USB port for power, including models like Z50, Z60, Z60 Pro, Mini5, Z40, N1, N3 Pro, and N5 Dual.
• Fuse Selection: When connecting to the fuse box, use an add-a-circuit fuse tap to avoid cutting original vehicle wiring and to ensure proper protection. Always use fuses of the correct amperage.
• Professional Installation: If you are unsure about wiring or working with your car's electrical system, it is highly recommended to seek professional installation to prevent damage to your vehicle or the hardwire kit.