Tzone TC604

User Manual

Tzone TC604 Thermocouple Thermometer

Model: TC604 | Brand: Tzone

1. Introduction

The Tzone TC604 is a high-precision, multi-channel thermocouple thermometer designed for accurate temperature measurement across various applications. It supports K, T, and J type thermocouple probes, offering versatility and reliability. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your TC604 thermometer.

Front view of the Tzone TC604 Thermocouple Thermometer with four probes connected.
Figure 1: Front view of the TC604 Thermometer with probes.

2. Safety Information

Please read and understand all safety instructions before operating the device. Failure to do so may result in injury or damage to the instrument.

  • Do not expose the device to extreme temperatures, humidity, or direct sunlight.
  • Use only specified thermocouple probes (K, T, J types).
  • Ensure batteries are inserted correctly according to polarity markings.
  • Keep the device away from strong electromagnetic fields.
  • Do not attempt to open or modify the device; refer servicing to qualified personnel.

3. Package Contents

Verify that all items are present in your package:

  • 1 x TC604 Main Thermometer Unit
  • 4 x Thermocouple Probes (K-type, unless specified otherwise)
  • 3 x AAA Batteries
  • 1 x USB Cable
  • 1 x Hard Carrying Case (if included with your model)
Tzone TC604 thermometer and accessories neatly arranged in a hard carrying case.
Figure 2: TC604 Thermometer and accessories in its carrying case.

4. Setup

4.1 Battery Installation

  1. Locate the battery compartment on the back of the TC604 unit.
  2. Open the battery cover.
  3. Insert three (3) AAA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
  4. Close the battery cover securely.
Back view of the Tzone TC604 Thermometer showing the battery compartment and kickstand.
Figure 3: Back view of the TC604, showing the battery compartment.

4.2 Probe Connection

  1. Identify the thermocouple input jacks at the top of the device. There are four channels labeled 1, 2, 3, 4.
  2. Connect your K, T, or J type thermocouple probes into the desired input jacks. Ensure the positive (+) and negative (-) terminals of the probe connector align with the markings on the device.
  3. Gently push the probe connector until it is firmly seated.
Top view of the Tzone TC604 Thermometer showing four thermocouple probes connected.
Figure 4: Top view showing connected thermocouple probes.

5. Operating Instructions

5.1 Power On/Off

  • Press the green button (Power/Menu) to turn the device ON.
  • To turn OFF, press and hold the green button for a few seconds until the display shuts down.

5.2 Basic Temperature Measurement

  • Once powered on, the LCD screen will display temperature readings for all connected probes.
  • Place the probe tip into the environment or surface you wish to measure.
  • Allow a few moments for the reading to stabilize.

5.3 Unit Selection (°C/°F/K)

  • Press the °C/°F/K button (located below the directional pad) to cycle through Celsius, Fahrenheit, and Kelvin units.

5.4 Data Hold Function

  • Press the HOLD button to freeze the current readings on the display.
  • Press HOLD again to release and resume live measurements.

5.5 MAX/MIN/AVG Readings

  • Press the MAX/MIN/AVG button to cycle through the maximum, minimum, and average temperature recorded since the function was activated or reset.
  • To reset MAX/MIN/AVG values, press and hold the MAX/MIN/AVG button.

5.6 Backlight Control

  • Press the red button (light bulb icon) to toggle the LCD backlight ON or OFF.

5.7 Probe Type Selection (K/T/J)

  • The device automatically detects the connected probe type. If manual selection is needed, navigate through the menu using the directional pad and the green button (Menu). Refer to the on-screen menu for specific options.

5.8 Data Recording (Logger Function)

  • The TC604 has data recording capabilities. Connect the device to a computer via the USB cable to access recorded data and configure logging settings using the provided software (if applicable).
  • Consult the software manual for detailed instructions on data logging and analysis.

6. Maintenance

6.1 Cleaning

  • Wipe the device casing with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Ensure no liquid enters the device openings.
  • Clean thermocouple probes gently, especially the sensing tip, to ensure accurate readings.

6.2 Battery Replacement

  • When the low battery indicator appears on the LCD, replace all three AAA batteries promptly.
  • Follow the battery installation steps in Section 4.1.
  • Dispose of used batteries according to local regulations.

6.3 Storage

  • Store the thermometer and probes in a cool, dry place, preferably in its original carrying case, when not in use.
  • Remove batteries if storing for extended periods to prevent leakage.

7. Troubleshooting

ProblemPossible CauseSolution
Device does not power on.Dead or incorrectly installed batteries.Check battery polarity; replace with fresh AAA batteries.
Inaccurate temperature readings.Damaged probe, incorrect probe type selected, or probe not fully inserted.Inspect probes for damage, ensure correct probe type is used, firmly insert probes. Calibrate if necessary (refer to advanced settings).
"OL" or "---" displayed.Temperature out of probe's range, open circuit in probe, or no probe connected.Ensure probe is within measurement range. Check probe connection or replace faulty probe.
USB connection not recognized.Driver not installed, faulty USB cable, or software issue.Install necessary drivers. Try a different USB port/cable. Reinstall software.

8. Specifications

FeatureDetail
ModelTC604
BrandTzone
Probe Types SupportedK, T, J Type Thermocouples
Number of Channels4
DisplayLCD Screen with Backlight
FunctionsMAX/MIN/AVG, HOLD, Data Recording
UnitsCelsius (°C), Fahrenheit (°F), Kelvin (K)
Power Source3 x AAA Batteries
ConnectivityUSB
Product Length28 cm
Product Width22 cm
Product Height8 cm
Product Weight1.5 kg
OriginMainland China
Diagram showing various applications of the thermometer including heavy industry, lab, fish tank, molten metal, industrial equipment, and HVAC.
Figure 5: Wide application areas of the TC604 Thermometer.

9. User Tips

  • For critical measurements, allow probes to stabilize in the environment for several minutes before taking a reading.
  • When measuring different temperatures simultaneously, ensure probes are correctly labeled to avoid confusion between channels.
  • Regularly check the battery level, especially before long data logging sessions, to prevent data loss.
  • Keep the USB port clean and free from dust to ensure reliable data transfer.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

Manufacturer: Tzone Digital Technology Co.,Ltd.

Related Documents - TC604

Preview TZ-Tag08 LoRa Temperature Sensor User Guide | TZONE Digital Technology
Comprehensive user guide for the TZONE TZ-Tag08 LoRa Temperature Sensor. Learn about its features, applications, specifications, working modes, and installation. Includes FCC and ISED statements.
Preview Tzone TempU06 Series Temperature Data Logger User Manual
User manual for the Tzone TempU06 series temperature data loggers, detailing features, operation, configuration, and technical specifications for monitoring temperature in storage and transportation of sensitive goods like vaccines, pharmaceuticals, and food.
Preview TZ-WF501 WiFi Temperature Sensor: User Manual, Features, Specifications, and Platform Guide
User manual for the TZ-WF501 WiFi Temperature Sensor. Covers product overview, applications, features, specifications, working modes, LCD display, operation, alarm functions, platform data query, PDF reporting, and configuration.
Preview Tzone TempU06 Series Temperature Data Logger User Manual
User manual for the Tzone TempU06 Series temperature data loggers, covering product introduction, features, usage instructions, configuration, battery replacement, and technical specifications. Includes models TempU06, TempU06 L100, and TempU06 L200.
Preview TempU06 Series Temperature Data Logger User Manual and Datasheet
User manual and technical datasheet for the Tzone TempU06 series temperature data loggers. Covers product introduction, features, usage instructions, configuration, battery information, cautions, and detailed specifications for models TempU06, TempU06 L100, and TempU06 L200.
Preview TT19/TT19EX Quick Setup Guide
A comprehensive guide to setting up and using the TT19/TT19EX real-time data logger, including device registration, SIM card insertion, battery connection, and data querying.