1. Introduction
This manual provides essential information for the safe and efficient operation and maintenance of your ANDELI RSR series Portable Capacitor Discharge Stud Welding Machine. Please read this manual thoroughly before operating the machine to ensure proper usage and to prevent potential hazards. Keep this manual for future reference.
The ANDELI RSR series welding machines are designed for high-efficiency stud welding, featuring rapid charging and intelligent voltage adjustment. They are suitable for a wide range of workpieces and materials, offering strong, uniform welds with minimal substrate damage.
2. Product Overview & Components
The ANDELI RSR series stud welding machine is a robust and portable unit. Key features include high power fast charging, intelligent adjustment for easy welding, and advanced thyristor devices for stable performance. The machine incorporates multiple protection functions such as high-speed fans for cooling and overtemperature protection, along with DC inverter technology for improved efficiency.
Figure 1: The ANDELI RSR series welding machine, featuring a compact design and digital controls.
2.1 Included Components & Accessories
The standard package typically includes the following items. Please verify all components upon receipt:
- ANDELI RSR Stud Welding Machine (specific model: RSR-1600, RSR-2500, or RSR-3500)
- Ground Clamp (x2)
- Stud Welding Torch
- Chucks (M3, M4, M5, M6, M8, M10 - specific sizes may vary by model)
- Carbon Steel Screws (e.g., M6*10)
- User Manual
Figure 2: The complete package includes the welding machine, ground clamps, welding torch, various chucks, and a user manual.
Figure 3: RSR-1600 model with standard accessories: 2 Ground Clamps, Stud Welding Torch, Chucks (M3, M4, M5, M6, M8), and Carbon Steel Screws M6*10. Weight: 15.6KG, Dimension: 490×320×210MM.
Figure 4: RSR-2500 model with standard accessories: 2 Ground Clamps, Stud Welding Torch, Chucks (M3, M4, M5, M6, M8, M10), and Carbon Steel Screws M6*10. Weight: 17.3KG, Dimension: 490×320×210MM.
Figure 5: RSR-3500 model with standard accessories: 2 Ground Clamps, Stud Welding Torch, Chucks (M3, M4, M5, M6, M8, M10), and Carbon Steel Screws M6*10. Weight: 18.6KG, Dimension: 490×320×210MM.
3. Setup Instructions
- Power Connection: Ensure the machine is connected to a stable 220V power supply.
- Ground Clamp Connection: Securely attach the ground clamp to the workpiece or a suitable grounding point on the welding table. A good ground connection is crucial for safe and effective welding.
- Stud Welding Torch Connection: Connect the stud welding torch to the designated port on the machine.
- Chuck Installation: Select the appropriate chuck size for the stud you intend to weld. Insert the chuck firmly into the torch.
- Initial Power-Up: Turn on the machine using the power switch. The 'POWER' indicator light on the control panel should illuminate.
Figure 6: The control panel features LED indicators for Power, Charge, Ready, and Weld status. A digital display shows voltage, and a rotary knob allows for intelligent voltage adjustment. Note: Do not weld when charging.
4. Operating Instructions
4.1 Basic Operation Sequence
- Power On: After setup, turn on the machine. The 'POWER' indicator will light up.
- Capacitor Charging: The 'CHARGE' indicator will illuminate, signifying that the internal capacitors are charging. This process typically takes approximately 4 seconds.
- Ready for Welding: Once charging is complete, the 'READY' indicator will light up. The machine is now prepared for welding.
- Voltage Adjustment: Use the rotary knob on the control panel to adjust the welding voltage. The digital display will show the current voltage. The machine features 'One-Key Intelligent Voltage Adjustment' for quick and precise settings. Refer to the 'Charging Voltage Reference' table in the Specifications section for recommended settings based on stud diameter.
- Insert Stud: Place the stud firmly into the chuck of the welding torch.
- Position Torch: Position the stud on the desired welding location on the workpiece. Ensure good contact.
- Initiate Weld: Press the trigger on the welding torch to initiate the weld. The 'WELD' indicator will briefly light up during the welding process.
- Inspect Weld: After welding, remove the torch and inspect the weld for quality and strength.
4.2 Welding Performance & Applications
The RSR series machines are capable of welding one screw in approximately 4 seconds. They produce uniform welding scar effects at the bottom of the screw, ensuring even energy release, beautiful weld formation, and low substrate damage. The resulting welds are very strong.
These machines are suitable for welding various materials including carbon steel, stainless steel, iron, aluminum, and galvanized sheet. They can handle a range of stud specifications:
- RSR-1600: M3-M6 studs
- RSR-2500: M3-M8 studs
- RSR-3500: M3-M10 studs
The machines are also effective for specialized applications such as pipe insulation nails and marine insulation nails.
Figure 7: This image illustrates the rapid charging process, taking approximately 4 seconds from 'Charge' to 'Ready' state for high-efficiency stud welding.
Figure 8: The image highlights the strong and uniform welds achieved, with minimal substrate damage. It shows a 'Tap the deformation diagram' where the iron plate and screws deform, but the weld remains intact.
Figure 9: This diagram shows the versatility of the machine, suitable for marine insulation nails, pipe insulation nails, aluminum male threaded studs, copper-plated carbon steel internal and male threaded studs (M5, M8).
Figure 10: The machine incorporates protection functions such as high-speed fans for cooling and overtemperature protection, along with DC inverter technology for improved efficiency.
Video 1: Demonstration of the ANDELI RSR Rapid Capacity Storage Stud Welding Machine in various applications, showcasing its speed and versatility. This video includes hands-on demonstrations of welding different types of screws and nails, including M8 male threaded copper-plated carbon steel screws, M8 female threaded copper-plated carbon steel screws, M8 male threaded stainless steel screws, M8 male threaded aluminum screws, pipeline insulation nails, and marine insulation nails.
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your welding machine.
- Cleaning: Keep the machine's exterior and ventilation openings clean and free from dust, metal particles, and debris. Use a dry, soft cloth for cleaning.
- Cable Inspection: Periodically inspect all cables (power, ground, torch) for any signs of wear, cuts, or damage. Replace damaged cables immediately.
- Chuck & Collet Maintenance: Clean the chuck and collet regularly to ensure proper seating of studs and good electrical contact. Replace worn chucks.
- Ventilation: Ensure that the machine's ventilation grilles are not blocked during operation to allow for adequate airflow and prevent overheating.
- Storage: When not in use, store the welding machine in a dry, cool, and dust-free environment.
6. Troubleshooting
If you encounter issues with your ANDELI RSR welding machine, refer to the following common problems and solutions:
- Machine Not Powering On:
- Check the power cable connection to both the machine and the power outlet.
- Ensure the power switch is in the 'ON' position.
- Verify that the input voltage is 220V.
- No Weld or Weak Weld:
- Ensure the workpiece surface is clean and free of rust, paint, or other coatings.
- Check that the ground clamp is securely attached and making good electrical contact.
- Verify that the correct chuck size is used for the stud.
- Adjust the welding voltage using the rotary knob. Increase voltage if the weld is too weak.
- Ensure the 'READY' indicator is lit before attempting to weld. The machine will not weld while charging.
- Machine Overheating:
- Check that the ventilation grilles are not blocked.
- Allow the machine to cool down. The built-in overtemperature protection will activate if the machine gets too hot.
- Inconsistent Welds:
- Ensure consistent pressure is applied to the welding torch during operation.
- Verify that the stud is properly seated in the chuck.
- Check for worn chucks or collets.
7. Specifications
Figure 11: The internal components include three large 36000uF capacitors (total 108000uF for RSR-2500, 144000uF for RSR-3500) and advanced thyristor devices for stable and powerful operation.
7.1 General Specifications
| Attribute | RSR-1600 | RSR-2500 | RSR-3500 | Heat Preservation Nail Welder | Marine Heat Insulation Nail Welder |
|---|---|---|---|---|---|
| Input Voltage | 220V | ||||
| Type | Storage Type | ||||
| Output Voltage | DC35-200V | ||||
| Shell Material | Steel | ||||
| Protection Level | IP31 | ||||
| Welding Speed | 15-50pcs per minute (depends on output voltage and stud diameter) | ||||
| Torch Cable Length | Standard 4m | ||||
| Stud Length Range | Standard up to 35MM (can be extended to any length) | ||||
| Capacitance | 72000uF | 108000uF | 144000uF | 72000uF | 108000uF |
| Input Power | 400W | 500W | 800W | 400W | 500W |
| Welding Material | Carbon steel, stainless steel, iron, aluminum, galvanized sheet | ||||
| Stud Specification | M3-M6 | M3-M8 | M3-M10 | Pipe Insulation Nails | Marine Insulation Nails |
| Brand Name | ANDELI (also XMSJ) | ||||
| Certification | NONE | ||||
| Condition | New | ||||
| Machine Type | Welding Manipulator | ||||
| Place of Origin | China (Mainland China) | ||||
| Function | Nail insulation | ||||
| Applicable Industries | Construction works, Other | ||||
| Key Selling Points | High Safety Level | ||||
| Marketing Type | New Product 2023 | ||||
7.2 Charging Voltage Reference
| Stud Diameter | Charging Voltage (V) | Remark |
|---|---|---|
| M3 | 55-65 | Adjust the parameters according to the actual situation |
| M4 | 65-75 | |
| M5 | 70-85 | |
| M6 | 85-110 | |
| M8 | 130-160 | |
| M10 | 160-180 |
8. User Tips
- For optimal results, always ensure the workpiece surface is clean and free of rust, paint, or any other contaminants that could interfere with the weld.
- Always select the correct chuck size for your stud to ensure a secure fit and consistent electrical contact, which is vital for a strong weld.
- When welding thin sheets (e.g., 0.6mm), the machine is designed to produce a slight indentation on the back with no obvious imprints, indicating a clean and effective weld.
- If your model supports dual-gun control, utilize this feature for continuous welding tasks to significantly improve efficiency and reduce waiting times between welds.
- Take advantage of the one-key intelligent voltage adjustment feature for quick and precise settings tailored to your specific material and stud type, ensuring optimal welding parameters.
9. Warranty and Support
The ANDELI RSR series welding machines come with a 2-year warranty for the main unit and its core components. This warranty covers defects in materials and workmanship under normal use.
For technical support, warranty claims, or any questions regarding the operation or maintenance of your ANDELI RSR welding machine, please contact your original seller or the manufacturer's authorized service center. Please have your model number and purchase details ready when contacting support.