lilygo T-Echo Lite

Contents

LILYGO® T-Echo Lite Instruction Manual

Model: T-Echo Lite

Brand: LILYGO

1. Introduction

The LILYGO® T-Echo Lite is a compact and energy-efficient development module designed for LoRa applications. It integrates an NRF52840 microcontroller, a LoRa transceiver, and a 1.22-inch e-paper display, making it an ideal solution for ultra-low power communication nodes. This device is compatible with Meshtastic firmware, offering capabilities for long-range wireless mesh networking. It also supports optional GPS expansion for location-based services.

The T-Echo Lite is available in three main configurations: the T-Echo Lite Main Unit, the T-Echo Lite Base, and the T-Echo Lite Core, each catering to different integration and usage scenarios.

2. Product Variants

The LILYGO T-Echo Lite series offers modularity to suit various project needs:

2.1 T-Echo Lite Main Unit

This is a ready-to-use LoRa device that combines the T-Echo Lite Base module with a protective enclosure and a 1.22-inch e-paper screen. It is designed for immediate deployment in applications requiring a complete, self-contained unit with display capabilities and optional GPS expansion.

LILYGO T-Echo Lite Main Unit, showing front with e-paper display and back with connectors

Figure 1: T-Echo Lite Main Unit (Front and Back Views)

Angled view of the LILYGO T-Echo Lite Main Unit

Figure 2: T-Echo Lite Main Unit (Angled View)

Dimensions of the LILYGO T-Echo Lite Main Unit: 41mm width, 41mm length, 14.5mm height

Figure 3: T-Echo Lite Main Unit Dimensions (41 x 41 x 14.5 mm)

Multiple views of the LILYGO T-Echo Lite Main Unit from different angles

Figure 4: T-Echo Lite Main Unit (Various Views)

2.2 T-Echo Lite Base

The T-Echo Lite Base serves as a breakout board for the T-Echo Lite Core module. It provides essential extensions such as battery and solar connections, a QWIIC connector, a USB port, and an interface for the 1.22-inch e-paper display. This version is suitable for users who want to integrate the Core module into custom setups while retaining access to common peripherals and power management features. Optional GPS expansion is also supported.

Top view of the LILYGO T-Echo Lite Base module with various connectors

Figure 5: T-Echo Lite Base Module (Top View)

Bottom view of the LILYGO T-Echo Lite Base module

Figure 6: T-Echo Lite Base Module (Bottom View)

Side views of the LILYGO T-Echo Lite Base module, showing connectors

Figure 7: T-Echo Lite Base Module (Side Views)

2.3 T-Echo Lite Core

The T-Echo Lite Core is the fundamental module, featuring a compact design that integrates the NRF52840 microcontroller, LoRa transceiver, solar power management, and battery management. Its stamp-hole design allows for easy integration into custom PCBs and projects, providing a powerful yet miniature solution for embedded applications.

Top view of the LILYGO T-Echo Lite Core module

Figure 8: T-Echo Lite Core Module (Top View)

Bottom view of the LILYGO T-Echo Lite Core module

Figure 9: T-Echo Lite Core Module (Bottom View)

Side views of the LILYGO T-Echo Lite Core module

Figure 10: T-Echo Lite Core Module (Side Views)

Comparison image showing the T-Echo Lite Main Unit, Base, and Core modules side-by-side

Figure 11: T-Echo Lite Main Unit, Base, and Core Comparison

3. What's in the Box

The contents of your package will vary depending on the specific T-Echo Lite version purchased:

3.1 T-Echo Lite Main Unit Package Contents

Diagram showing contents for T-Echo Lite Main Unit: 1x T-Echo Lite, 2x Pin headers, 2x Power cables

Figure 12: T-Echo Lite Main Unit Shipping List

  • 1 x T-Echo Lite Main Unit
  • 2 x Pin Headers
  • 2 x Power Cables

3.2 T-Echo Lite Base Package Contents

Diagram showing contents for T-Echo Lite Base: 1x T-Echo Lite Base, 1x Antenna, 2x Pin headers, 2x Power cables

Figure 13: T-Echo Lite Base Shipping List

  • 1 x T-Echo Lite Base
  • 1 x Antenna
  • 2 x Pin Headers
  • 2 x Power Cables

3.3 T-Echo Lite Core Package Contents

  • 1 x T-Echo Lite Core Module

4. Setup

Follow these steps to set up your T-Echo Lite module:

4.1 Initial Assembly (for Base and Main Unit)

  1. Connect Antenna (for Base version): If you have the T-Echo Lite Base, carefully connect the provided antenna to the U.FL connector on the board. Ensure a secure connection.
  2. Connect Power Cable: Use the provided power cable to connect your T-Echo Lite to a compatible power source (e.g., battery or solar panel). The battery charging input is 5V 500mA.
  3. Attach Pin Headers: If your application requires external connections, solder or attach the provided pin headers to the appropriate pinouts on the Base or Core module.

4.2 Optional GPS Module Installation (for Main Unit and Base)

The T-Echo Lite supports an optional L76K GPS module for enhanced positioning capabilities. To install:

  1. Locate the dedicated GPS expansion slot on your T-Echo Lite Main Unit or Base board.
  2. Carefully align the L76K GPS module with the connector pins.
  3. Gently press the GPS module into place until it is securely seated.
Diagram showing how to insert the optional GPS module into the T-Echo Lite board

Figure 14: Optional GPS Module Installation

5. Operating Instructions

5.1 Firmware Upload

The T-Echo Lite is designed to be programmable using standard development environments. You can use:

  • **Arduino-IDE:** A popular open-source electronics platform for writing code and uploading it to boards.
  • **VS Code (Visual Studio Code):** A powerful code editor with extensions for embedded development, such as PlatformIO.

Refer to the LILYGO official documentation or community resources for detailed guides on setting up your development environment and uploading firmware, especially for Meshtastic.

5.2 Meshtastic Firmware

The T-Echo Lite is compatible with Meshtastic firmware, enabling off-grid, long-range communication. Once Meshtastic firmware is uploaded, you can configure the device via a mobile app or web interface. The e-paper display will show relevant information such as messages, device status, and GPS coordinates (if the GPS module is installed and active).

5.3 E-Paper Display Usage

The 1.22-inch e-paper display is ultra-low power and provides clear, readable information. It typically updates only when new data needs to be shown, conserving battery life. The display resolution is 176x192 pixels.

6. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the device. Avoid using liquids or abrasive cleaners.
  • Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
  • Battery Care: Ensure the battery is charged using a 5V 500mA power source. Avoid overcharging or completely draining the battery for optimal lifespan.
  • Firmware Updates: Regularly check for firmware updates from LILYGO or the Meshtastic community to ensure optimal performance and access to new features.

7. Troubleshooting

  • Device Not Powering On:
    • Check battery connection and charge level.
    • Ensure the power cable is correctly connected to a 5V 500mA source.
  • E-Paper Display Not Updating:
    • Verify that the firmware is correctly uploaded and running.
    • Check connections between the Core and Base modules, and the display.
  • LoRa Communication Issues:
    • Ensure the antenna is securely connected (for Base version).
    • Check LoRa frequency settings in your firmware to match local regulations (433, 868, 915, 923MHz).
    • Verify that other Meshtastic devices are within range and configured correctly.
  • GPS Not Acquiring Signal:
    • Ensure the optional L76K GPS module is correctly installed.
    • Operate the device outdoors with a clear view of the sky.
    • Allow sufficient time for initial satellite acquisition.

8. Specifications

Table of T-Echo Lite Specifications including MCU, Flash, RAM, Programming Platform, Wireless Connectivity, LoRa Transceiver, E-Paper Display, GNSS module, Size, and Battery Charging

Figure 15: T-Echo Lite Specifications Summary

T-Echo Lite Technical Specifications
Feature Detail
MCU NRF52840
Flash Memory 1MB
RAM 256KB
Programming Platform Arduino-IDE, VS Code
Wireless Connectivity Bluetooth 5, Thread, ANT, Bluetooth Mesh, 802.15.4, Zigbee, 2.4 GHz proprietary
Battery Measurement Control IO 0.31, ADC: IO 0.2
LoRa Transceiver SX1262 (Long Range, Low Power)
LoRa Support Bands 433, 868, 915, 923MHz
E-Paper Display 1.22 inch SPI, Resolution: 176 x 192, Type Name: GDEM0122T61
GNSS Module (Optional) L76K Multi-System Positioning (GPS, GLONASS, BeiDou, QZSS)
Dimensions (Main Unit) 41 x 41 x 14.5 mm
Battery Charging 5V 500mA

8.1 Pinmap Diagram

The following diagram illustrates the pin assignments for the T-Echo Lite module, including connections for the NRF52840, e-paper display, L76K GPS, LoRa, and IMU.

Detailed pinmap diagram for LILYGO T-Echo Lite, showing pin assignments for MCU, LoRa, E-Paper, GPS, and IMU

Figure 16: T-Echo Lite Pinmap

9. User Tips

  • Community Support: For advanced usage, custom firmware, or specific Meshtastic configurations, explore the active Meshtastic community forums and LILYGO's official GitHub repositories.
  • Power Optimization: Leverage the ultra-low power features by optimizing your firmware for deep sleep modes and efficient data transmission, especially when using battery power.
  • Antenna Placement: For optimal LoRa performance, ensure the antenna (for Base version) is positioned vertically and has a clear line of sight.

10. Warranty and Support

For technical support, warranty claims, or any product-related inquiries, please contact the LILYGO Official Store or refer to their official website for detailed support information. Ensure you have your purchase details available when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.