JIKONG JK-B2A24S15P

Contents

JIKONG JK-B2A24S15P Smart BMS User Manual

Model: JK-B2A24S15P | Brand: JIKONG

1. Introduction

The JIKONG JK-B2A24S15P is an intelligent active balanced power management system (BMS) designed for 8S-24S series Li-ion, LiFePO4, and LTO battery packs. It provides comprehensive protection and management functions, including active balancing, overcharge protection, over-discharge protection, overcurrent protection, and short circuit protection. This manual provides detailed instructions for the installation, operation, and maintenance of your Smart BMS.

2. Product Specifications

The JK-B2A24S15P Smart BMS offers robust features for battery management. Key specifications are detailed below:

2.1 General Specifications

  • Brand Name: JIKONG
  • Type: LiFePO4 Battery BMS (also compatible with Li-ion/LTO)
  • Handware or Smart: SMART BMS
  • Balance Function: Active Balanced BMS
  • Charge and Discharge Port: Common Port BMS
  • Charging Current: 100A
  • Function: Overcharge Protection, Over Discharge Protection, Overcurrent Protection, Short Circuit Protection
  • Usage Scenario: Power BMS, Energy Storage BMS, 3C Digital BMS
  • Origin: Mainland China

2.2 Detailed Technical Parameters (JK-B2A24S15P Model)

JIKONG Product Specifications (Excerpt for JK-B2A24S15P)
Technical IndexJK-B2A24S15P
Number of Battery Strings (Li-ion/LTO)7S-20S
Number of Battery Strings (LiFePO4)8S-24S
Number of Battery Strings (Total)12S-20S
Balance MethodActive Balance (Full State On)
Balance Current1.5A
Conductive Resistance in Main Circuit0.35mΩ
Continuous Discharge Current150A
Continuous Charge Current150A
Maximum Discharge Current (MAX 300ms)300A
Over Charge Protection Current (μA)10-150A
Other Interfaces (Default)RS485
Other Interfaces (Customized)CANBUS, HEAT
Size/mm162*102*20mm
Wiring OutputCommon Port
Single Cell Voltage Range1-5V
Voltage Detection Accuracy±5mV
Over Charge Protection Voltage1.2-4.35V Adjustable
Over Charge Release Voltage1.2-4.35V Adjustable
Over Current Detect Delay2-120S Adjustable
Over Discharge Protection Voltage1.2-4.35V Adjustable
Over Discharge Release Voltage1.2-4.35V Adjustable
Quantity of Temperature Detection3Pcs
Temp ProtectionYes
Short Circuit ProtectionYes
Coulomb CounterYes
Bluetooth FunctionSupport for Android/iOS phone

Note: The data tolerance range is ±2mm for physical dimensions.

Product dimensions of the JIKONG JK-B2A24S15P Smart BMS
Figure 1: Product dimensions of the JIKONG JK-B2A24S15P Smart BMS. The main body measures 162mm x 102mm x 16.6mm, with a mounting plate of 95mm x 68.5mm x 67.5mm.

3. Package Contents

Upon opening your JIKONG JK-B2A24S15P Smart BMS package, please verify that all the following components are included:

  • 1 x JIKONG Smart BMS Unit
  • 1 x Switch (long 50cm)
  • 1 x NTC Temperature Sensor (long 40cm)
  • 1 x Sampling Line B (long 70cm)
  • 1 x Sampling Line A (long 70cm)
Packing list for JIKONG JK-B2A24S15P Smart BMS
Figure 2: Visual representation of the JIKONG JK-B2A24S15P Smart BMS package contents, including the BMS unit, switch, NTC sensor, and two sampling lines.

4. Setup and Installation

Careful installation is crucial for the safe and efficient operation of your Smart BMS. Please follow these steps precisely.

4.1 Interface Overview

The BMS features a rich interface to meet various daily needs, supporting RS485/CAN communication modes simultaneously through different interfaces.

Rich interface of JIKONG Smart BMS showing ports for RS485/CAN, NTC, GPS, Display/Switch, and Hot
Figure 3: Overview of the BMS interfaces. From left to right: RS485/CAN, NTC, Sampling port B, GPS, Display/Switch, Sampling port A, Hot.

4.2 Wiring Instructions

The following steps outline the general wiring procedure. Always ensure all cables are connected correctly before powering on the system.

  1. Connect all balance cables to the battery cells.
  2. Insert the balance cable into the BMS.
  3. Connect the B-line (battery negative) and the P-line (load/charger negative) to the battery.

Refer to the specific wiring diagrams below for 16-string and 24-string cell configurations.

Wiring diagram for a 16-string cell battery pack with JIKONG Smart BMS
Figure 4: Wiring method for a 16-string cell battery pack. Connect individual cell balance wires (B1 to B16) to the BMS, then connect the total negative electrode (B-) and total positive electrode (P+) to the battery. The P- terminal connects to the load/inverter/charger.
Wiring diagram for a 24-string cell battery pack with JIKONG Smart BMS
Figure 5: Wiring method for a 24-string cell battery pack. Connect individual cell balance wires (B1 to B24) to the BMS, then connect the total negative electrode (B-) and total positive electrode (P+) to the battery. The P- terminal connects to the load/inverter/charger.

4.3 BMS Accessories

Various accessories are available to enhance the functionality and monitoring of your JIKONG BMS, including different display sizes and communication modules.

JIKONG BMS Accessories including interface board, displays, switch key, and RS485 module
Figure 6: JIKONG BMS Accessories. This image displays an interface board, 2.5-inch displays, a switch key, an RS485 module, a 4.3-inch touch display, and a 3.2-inch display.

5. Operating Instructions

The JIKONG Smart BMS offers intelligent interaction and easy operation through its mobile app and PC software.

5.1 Mobile App and PC Software

The mobile app, 'JIKONG SMART BMS', is a personal lithium battery steward that provides clear information at a glance. It supports iOS, Android, and HarmonyOS systems and multiple languages.

Mobile app interface for JIKONG Smart BMS showing real-time battery data
Figure 7: Multi-screen display and data connection via the mobile app. The app shows real-time data such as voltage, current, temperature, State of Charge (SOC), alarms, and cycle count for each cell.

You can freely choose between the mobile app, computer upper computer software, or a dedicated home storage display according to your actual needs.

Options for monitoring JIKONG Smart BMS: Mobile App, PC software, and JIKONG home storage display
Figure 8: Intelligent interaction and easy operation. This image shows the three main ways to interact with the BMS: Mobile App, PC software, and a dedicated JIKONG home storage display.

5.2 Parameter Adjustment

The BMS allows for intelligent adjustment of multiple protection values such as overcharge, over-discharge, overcurrent, temperature, and balance. If you need to adjust these parameters, please read the internal parameters of the protection board first, and then make changes.

PC software interface for JIKONG Smart BMS showing settings for inverter communication protocols
Figure 9: The inverter communication protocol can also be set through the host computer. The PC software provides detailed settings and monitoring capabilities.

5.3 Active Balancing

The JIKONG Smart BMS utilizes intelligent active balancing technology to efficiently balance cell voltage differences and improve battery performance. Active balancing is achieved through energy transfer, moving energy from cells with higher energy to cells with lower energy, achieving voltage balance with minimal energy loss. This process operates continuously whenever there is a voltage difference above the set threshold, regardless of whether the battery is charging, discharging, or idle. It works continuously until the voltage difference is within the set range.

Diagram illustrating active balancing in a battery pack
Figure 10: Active Balancing (Lossless Balancing). This diagram shows how the BMS actively transfers energy between cells to maintain voltage balance, improving overall battery health and lifespan.
Excellent Balance Effect (16-section 100AH series battery example)
Pressure difference before and after balance (V)1S2S3S4S5S6S7S8S
Before balance3.8963.8943.8773.8463.9023.8923.8443.962
After balance3.7913.7963.7913.7963.7953.7963.7943.796
Pressure difference before balance: 0.639V
9S10S11S12S13S14S15S16S
Before balance3.4914.1303.9583.9573.8653.7783.5753.573
After balance3.7923.7993.8003.7993.7963.7953.7943.790
Pressure difference after balance: 0.01V

5.4 Inverter Communication Protocols

The JIKONG Smart BMS is compatible with mainstream inverter communication protocols in the market. These protocols can be easily set up through the mobile app or the host computer software.

Mobile app interface for selecting CAN protocols for inverter communication
Figure 11: Protocol docking, fast and convenient. This image shows the mobile app interface for selecting supported CAN protocols, including Deye, Pylontech, Growatt, Victron Energy, INVT, SMA, and SRNE.

6. Maintenance

To ensure the longevity and optimal performance of your JIKONG Smart BMS, consider the following maintenance guidelines:

  • Regular Monitoring: Periodically check the battery parameters via the mobile app or PC software to ensure all cells are balanced and operating within safe limits.
  • Firmware Updates: Check the manufacturer's website or app for any available firmware updates to ensure your BMS has the latest features and bug fixes.
  • Physical Inspection: Regularly inspect the BMS unit and all connected cables for any signs of damage, corrosion, or loose connections.
  • Environmental Conditions: Ensure the BMS operates within its specified temperature and humidity ranges. The fully enclosed aluminum alloy shell provides effective dustproof and waterproof protection, reducing damage from external environments.
  • Cleaning: Keep the BMS unit clean and free from dust and debris. Use a soft, dry cloth for cleaning.
JIKONG Smart BMS unit being splashed with water, demonstrating its dustproof and waterproof features
Figure 12: Dustproof and waterproof, anti-voltage and anti-vibration design. The fully enclosed aluminum alloy shell and internal high-strength insulating material protect the electronic components.

7. Troubleshooting

This section provides guidance on common issues you might encounter with your JIKONG Smart BMS.

  • BMS Not Powering On:
    • Check all power connections, especially the main battery positive (P+) and negative (B-) terminals.
    • Ensure the balance wires are correctly inserted and making good contact.
    • Verify the battery pack voltage is within the operational range of the BMS.
  • Unbalanced Cells:
    • Confirm that the active balancing function is enabled in the app/software settings.
    • Allow sufficient time for the active balance to work, especially if the cell voltage difference is significant.
    • Inspect balance wires for damage or loose connections.
  • Overcharge/Over-discharge Protection Triggered:
    • Check the battery charger and load to ensure they are operating correctly.
    • Review the overcharge/over-discharge voltage settings in the BMS app/software. Adjust if necessary, but always adhere to your battery manufacturer's recommendations.
  • Overcurrent/Short Circuit Protection Triggered:
    • Reduce the load on the battery.
    • Inspect the wiring for any short circuits.
    • Check the overcurrent protection settings in the BMS app/software.
  • Communication Issues (Bluetooth/RS485/CAN):
    • Ensure the mobile app or PC software is the latest version.
    • Verify Bluetooth is enabled on your device and the BMS is discoverable.
    • Check physical connections for RS485/CAN modules.
    • Ensure correct protocol selection in the app/software for inverter communication.
  • Temperature Protection Triggered:
    • Ensure the NTC temperature sensors are correctly installed and making good contact with the battery cells.
    • Check for proper ventilation around the battery pack and BMS.
    • Verify temperature limits in the BMS app/software.

If you encounter persistent issues, please consult the manufacturer's support or a qualified technician.

8. User Tips

  • Initial Setup: Always perform a thorough check of all wiring connections before applying power to the BMS for the first time. Incorrect wiring can cause damage to the BMS or battery.
  • App Monitoring: Utilize the JIKONG Smart BMS mobile app for real-time monitoring of individual cell voltages, temperatures, and overall battery health. This helps in proactive maintenance and identifying potential issues early.
  • Parameter Customization: The BMS allows for extensive customization of protection parameters. While this offers flexibility, ensure that any adjustments are made with a clear understanding of your battery's specifications and safety limits. Incorrect settings can lead to battery damage or safety hazards.
  • Active Balancing Benefits: The active balancing feature significantly extends battery life and improves performance by keeping cells in sync. Allow the system sufficient time to balance, especially after initial setup or deep discharge cycles.
  • Inverter Compatibility: When connecting to an inverter, ensure the correct communication protocol is selected in the BMS settings to guarantee seamless integration and data exchange.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact JIKONG customer service directly or refer to the official JIKONG website. Ensure you have your product model number (JK-B2A24S15P) and purchase details available when seeking support.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.