MOKA SFX MK-CN03 Confetti Cannon User Manual

1. Introduction

The MOKA SFX MK-CN03 is a professional double-shot confetti streamer launcher designed to create exciting atmospheric effects for various events. This machine can be controlled via DMX512 or a dedicated remote, offering versatility for weddings, parties, clubs, theaters, and concerts. This manual provides essential information for the safe and effective operation, setup, and maintenance of your confetti cannon.

Figure 1: MK-CN03 Confetti Cannon in use at an event.

2. Safety Information

• Always operate the device in a well-ventilated area.
• Ensure the power supply matches the specified voltage (AC110V-220V, 50/60Hz).
• Do not expose the device to rain or moisture.
• Keep a safe distance from the confetti output nozzles during operation.
• Do not block the ventilation openings.
• Disconnect from power before cleaning or servicing.
• This device is for professional use only.
• Keep out of reach of children.

3. Package Contents

Verify that all items are present and in good condition upon unpacking:

• 1 x MOKA SFX MK-CN03 Confetti Cannon Unit
• 1 x Power Cable
• 1 x DMX Cable
• 1 x Remote Control
• User Manual (this document)

Note: Confetti cartridges are consumables and are not included with the unit. They must be purchased separately.

Figure 2: Standard accessories included with the MK-CN03.

4. Product Overview

Familiarize yourself with the main components and controls of the MK-CN03 Confetti Cannon.

Figure 3: Control Panel Introduction.

• LCD Display: Provides easy and convenient operation, showing current settings and status.
• DMX In & Out: Connectors for DMX512 control signals.
• Power IN & OUT: Power input and loop-through output for connecting multiple units.
• Switch: Main power ON/OFF switch.
• Fuse: Overcurrent protection for the device.
• Adjustable Angle: The confetti barrels can be adjusted up to 180° to direct the confetti spray as needed.

Figure 4: 180° Adjustable Angle.

5. Specifications

6. Setup

1. Placement: Position the confetti cannon on a stable, level surface. Ensure there is ample clear space above and in front of the unit for confetti dispersion.
2. Power Connection: Connect the provided power cable to the "POWER IN" socket on the unit and then to a suitable AC110V-220V, 50/60Hz power outlet. If linking multiple units, use the "POWER OUT" to connect to the next unit.
3. DMX Connection (Optional): For DMX control, connect a DMX cable from your DMX controller's output to the "DMX IN" socket on the confetti cannon. If linking multiple units, connect from the "DMX OUT" of the first unit to the "DMX IN" of the next.
4. Load Consumables: Carefully insert the confetti cartridges into the barrels. Ensure they are securely seated according to the cartridge manufacturer's instructions.
5. Adjust Angle: Loosen the adjustment knobs on the sides of the barrels and set the desired projection angle. Tighten the knobs to secure the barrels in place.

Figure 5: Loading Electric Cannon or Ribbon Cartridges.

7. Operating Instructions

1. Power On: Flip the main "ON/OFF" switch to the "ON" position. The LCD display will illuminate.
2. Select Control Mode:
   • DMX512 Control: Use the LCD display and navigation buttons (ESC, DOWN, UP, ENTER) to set the DMX address and configure the 6 DMX channels according to your DMX controller's settings. Refer to your DMX controller manual for specific channel assignments for triggering.
   • Remote Control: Ensure the remote control has fresh batteries. Point the remote towards the unit and press the desired button to trigger the confetti launch.
3. Confetti Launch: Once the control mode is set and the unit is ready, activate the DMX channel or press the remote button to launch confetti. The upgraded control board ensures no delayed injection for precise timing.
4. Power Off: After use, switch the main "ON/OFF" switch to the "OFF" position and disconnect the power cable.

8. Maintenance

• Cleaning: Regularly clean the exterior of the unit with a soft, dry cloth. Ensure no confetti residue or dust accumulates in the barrels or on the control panel.
• Fuse Replacement: If the unit does not power on, check the fuse located near the power switch. Disconnect power, open the fuse holder, and replace with a fuse of the same type and rating (e.g., 5A).
• Storage: When not in use, store the confetti cannon in a dry, dust-free environment, preferably in its original packaging or a protective case.

9. Troubleshooting (FAQ)

Q: What should I do if the product breaks during the warranty period?

A: If there is a problem with the product, please send pictures or videos of the issue to customer support. We will guide you on how to fix it and provide free spare parts if necessary.

Q: What type of consumables does this machine use?

A: The machine uses confetti cartridges. These are not included and must be purchased separately.

10. User Tips

• The upgraded control board ensures a "no delayed injection," meaning confetti is launched instantly when triggered. This is crucial for precise timing during performances or events.
• The LCD display makes operation "very easy and convenient." Take advantage of the clear interface for quick adjustments and monitoring.
• Experiment with the 180° adjustable angle to achieve different confetti spread patterns and coverage areas for your specific event needs.

11. Warranty and Support

The MOKA SFX MK-CN03 Confetti Cannon comes with a 1-year warranty from the date of purchase.

For any technical assistance, troubleshooting, or warranty claims, please contact MOKA SFX customer support. Our professional foreign trade team is available to help solve any problems regarding our products in a timely manner.

Figure 6: Product Certifications (CE, ROHS, FCC).