Introduction
The Yieryi 7-In-1 Digital Soil Tester (Model: YY-1066L) is a versatile and essential tool for maintaining optimal plant health. This device accurately measures seven critical soil and environmental parameters: Soil pH, Soil Moisture, Soil Fertility, Light Intensity, Soil Temperature, Air Humidity, and Ambient Temperature. Featuring a large, backlit LCD display and a rotatable screen, it provides clear, real-time data for both indoor and outdoor plant care. Designed for ease of use, this tester helps gardeners, farmers, and plant enthusiasts make informed decisions to foster greener, healthier, and more lush plants.

Figure 1: Yieryi 7-in-1 Digital Soil Tester and its packaging.
Product Features
- 7-in-1 Multi-Function: Measures Soil PH, Moisture, Fertility, Light, Soil Temperature, Air Humidity, and Ambient Temperature.
- Accurate Readings: High-precision probe ensures reliable and fast measurements.
- Large Backlit LCD Display: Clear and easy-to-read data, even in low light conditions. All data displayed on one screen, eliminating the need to switch pages.
- Rotatable 90° Display: Flexible adjustment of the screen angle to avoid reflections and obstructions for optimal viewing.
- Simple Operation: One-button start for quick and easy use.
- Compact & Portable: Lightweight design for convenient carrying and use in various locations.
- Wide Range of Applications: Suitable for indoor and outdoor plant testing, including potted plants, vegetable gardens, farms, and greenhouses.

Figure 2: Overview of the soil tester's key features.
Setup Guide
- Battery Installation: Open the battery compartment cover on the back of the device. Insert 3 AAA batteries, ensuring correct polarity. Close the cover securely. (Batteries are not included in the package).

Figure 3: Battery compartment and LCD display.
- Initial Insertion: Gently insert the metal probe into the soil to a depth of 3-5 inches (approximately 7.5-12.5 cm). Ensure the probe is fully in contact with the soil for accurate readings.
- Power On: Press the ON/OFF button located on the side of the device to power it on.
- Stabilization: Allow a few seconds for the readings to stabilize on the LCD screen before taking your measurements.
Important Setup Tips:
- Avoid Hard Soil: Do not force the soil meter into very hard soil or soil with large stones, as this may damage the probe.
- Soil Contact: Ensure the probe is inserted into moist soil. Dry soil may result in inaccurate readings.
- Not for Liquids: This tester is designed for soil only. Do not use it to test water or other liquids, including hydroponic solutions.

Figure 4: Visual guide for setup and usage tips.
Operating Instructions
- Power On: Press the ON/OFF button to turn on the device. The backlit LCD screen will illuminate, displaying all seven measurement parameters simultaneously.
- Temperature Unit Conversion: The ON/OFF button also functions as a temperature unit conversion button. Press it briefly to switch between Celsius (°C) and Fahrenheit (°F) for temperature readings.
- Insert into Soil: Carefully insert the probe into the soil you wish to test. For best results, ensure the soil is not overly compacted or dry.
- Read Measurements: Once the probe is in the soil, the device will automatically begin measuring. The large LCD screen displays the following values:
- NUTR (Fertility): Indicated by a percentage (1% - 99%).
- PH: Soil pH level (3.0 - 8.5).
- Light: Light intensity (LOW-, LOW, NOR, HGH, HGH+).
- Air Temperature: Ambient air temperature (-10 ~ 60℃ / 14 ~ 140℉).
- Soil Temperature: Soil temperature (-10 ~ 60℃ / 14 ~ 140℉).
- Air Humidity: Ambient air humidity (1% - 100%).
- Soil Moisture: Soil moisture level (DRY-, DRY, NOR, WET, WET+).
- Adjust Display Angle: The display screen can be rotated 90 degrees up and down. Adjust the angle as needed to avoid glare or obstructions and ensure clear visibility of the data.
- Auto Power-Off: The device features an automatic power-off function after 5 minutes of inactivity to conserve battery life.

Figure 5: Explanation of the 7 measurement functions.

Figure 6: Rotatable 90° display for easy viewing.
Video 1: Demonstration of the 7-in-1 Multi-function Soil Tester in use, highlighting its features and ease of reading.
Maintenance
- Cleaning the Probe: After each use, wipe the metal probe clean with a damp cloth to remove any soil residue. This prevents contamination and ensures accurate future readings.
- Storage: Store the soil tester in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: If the device will not be used for an extended period, remove the AAA batteries to prevent leakage and potential damage to the unit.
- Avoid Prolonged Immersion: Do not leave the soil meter probe in the soil for a long time, as this can affect its longevity and accuracy.
Troubleshooting
- No Display/Faint Display: Check if the batteries are correctly installed and have sufficient charge. Replace with new AAA batteries if necessary.
- Inaccurate Readings:
- Ensure the probe is clean and free of debris.
- Verify the probe is inserted deep enough (3-5 inches) into the soil.
- Make sure the soil is adequately moist. Very dry soil can lead to unreliable readings.
- Avoid using the tester in extremely hard or rocky soil, which can prevent proper probe contact.
- Device Not Responding: Try removing and reinserting the batteries. If the issue persists, contact customer support.
- Cannot Test Water/Hydroponics: This device is specifically designed for soil testing. It will not provide accurate readings in water or hydroponic solutions and may be damaged if used in such environments.
Specifications
| Parameter | Value |
|---|---|
| Model | YY-1066L |
| Name | 7-In-1 Soil Tester |
| Measurement Functions | Soil PH, Moisture, Fertility, Light, Soil Temperature, Air Humidity, Ambient Temperature |
| PH Range | 3.0 ~ 8.5 |
| Moisture Levels | DRY- ~ WET+ |
| Fertility Range | 1% ~ 99% |
| Light Levels | LOW-, LOW, NOR, HGH, HGH+ |
| Temperature Range | -10 ~ 60℃ (14 ~ 140℉) |
| Humidity Range | 1% ~ 100% |
| Display | LCD With Backlight |
| Auto Power-Off | 5 Minutes |
| Battery | 3 × AAA Batteries (Not Included) |
| Product Size | 260 × 70 × 30 mm |
| Probe Length | 165 mm |
| Weight | 120g (Without Packaging) |
| Usage | Indoor / Outdoor Plant Soil Testing |

Figure 7: Product dimensions and component overview.
User Tips
- For consistent readings, try to test the soil at roughly the same depth and location each time.
- Always clean the probe thoroughly after use to prevent residue buildup, which can affect accuracy.
- If testing multiple plants, clean the probe between each plant to avoid cross-contamination of soil samples.
- Remember that the device is not designed for prolonged immersion in soil or for testing liquids.
Frequently Asked Questions (FAQ)
- Q1: Can this soil tester be used for hydroponics?
- A1: No, this tester is designed for soil only. Do not use in water or hydroponic systems.
- Q2: Does it come with batteries?
- A2: No, batteries are not included. You will need 3 AAA batteries.
- Q3: Can I use it for all types of soil?
- A3: Yes, it works well with most common plant soils. Avoid very hard soil or soils with stones.
- Q4: Is it easy to use for beginners?
- A4: Absolutely! Just insert the probe into the soil and read the results on the screen.
- Q5: Can it be used outdoors?
- A5: Yes, it is suitable for both indoor and outdoor gardening use.
Warranty and Support
The Yieryi 7-In-1 Digital Soil Tester is designed for long-term use with minimal maintenance, provided it is used and cared for according to the instructions. Specific warranty details are not provided in this manual. For any product inquiries, technical support, or warranty claims, please contact the seller or manufacturer directly through your purchase platform. Ensure you retain your proof of purchase for any support requests.