AZDOME PG17 Max

Contents

AZDOME PG17 Max Rearview Dash Cam User Manual

Model: PG17 Max

Brand: AZDOME

1. Introduction

The AZDOME PG17 Max is an advanced rearview dash camera system designed to enhance your driving safety and provide comprehensive recording capabilities. Featuring dual 4K front and 2.5K rear cameras, a 12-inch touch screen, and integrated Advanced Driver Assistance Systems (ADAS) including Blind Spot Detection (BSD) and Lane Change Assist (LCA), this device offers superior clarity and intelligent alerts. It also includes built-in GPS for route tracking, 5.8GHz Wi-Fi for app control, smart voice control, and 24-hour parking monitoring.

2. What's in the Box

Please check the package contents upon unboxing:

Contents of the AZDOME PG17 Max package, including the mirror dash cam, rear camera, GPS module, cables, and accessories.

Image: AZDOME PG17 Max package contents

  • 4K Mirror Dash Cam (Main Unit)
  • 2.5K Rear Camera
  • External GPS Module
  • Car Charger (Type-C USB 3.5M/12ft) x1
  • 12ft Type-C Power Cable
  • 20ft Rear Cam Cable
  • Pry Tool x1
  • Cable Clips x5
  • Anti-Glare Protective Film x1
  • Long Straps x2
  • Short Straps x2
  • User Manual x1
  • AZDOME 64GB SD Card x1 (Included in some bundles)

3. Setup Guide

3.1. Installing the Mirror Dash Cam

  1. Attach the mirror dash cam to your vehicle's existing rearview mirror using the provided straps. Ensure it is securely fastened and does not obstruct your view.
  2. Apply the anti-glare protective film to the screen if desired, following the instructions on the film packaging.

3.2. Connecting the Rear Camera

  1. Mount the 2.5K rear camera at the rear of your vehicle, typically above the license plate or on the rear window. The camera is IP68 waterproof.
  2. Route the 20ft rear cam cable from the rear camera to the main mirror dash cam unit. Use the pry tool and cable clips to neatly tuck the cable along the vehicle's interior trim.
  3. Connect the rear cam cable to the designated port on the main dash cam unit.
Diagram showing the IP68 waterproof rear camera installation and features like wide field of view and reverse assist.

Image: IP68 Waterproof Rear Camera

3.3. Installing the GPS Module

  1. Attach the external GPS module to your windshield, ensuring it has a clear view of the sky for optimal signal reception.
  2. Connect the GPS module cable to the main dash cam unit.

3.4. Power Connection

  1. Connect the 12ft Type-C power cable to the car charger.
  2. Plug the car charger into your vehicle's 12V power outlet (cigarette lighter socket).
  3. Connect the Type-C end of the power cable to the main dash cam unit.

3.5. Inserting the SD Card

  1. Ensure the dash cam is powered off.
  2. Insert a Class 10 or higher Micro SD/TF card (up to 512GB supported) into the designated SD card slot on the dash cam. Push until it clicks into place.
  3. To remove, gently push the card in again until it springs out.

3.6. Optional Hardwire Kit for 24H Parking Monitor

For continuous 24-hour parking monitoring, a hardwire kit (sold separately or included in specific bundles) is required. Follow the hardwire kit's specific installation instructions to connect it to your vehicle's fuse box.

4. Operating Instructions

4.1. Power On/Off

  • The dash cam will automatically power on and begin recording when your vehicle's ignition is turned on.
  • It will automatically power off when the ignition is turned off.
  • You can also manually power on/off the device using the power button.

4.2. Touch Screen Operation

The 12-inch IPS touch screen allows for intuitive navigation through menus, settings, and video playback. Swipe left/right to switch between front and rear camera views, and tap icons to access various functions.

4.3. Video Recording

  • Dual Recording: The dash cam records simultaneously in 4K (3840x2160p) for the front camera and 2.5K (2560x1440p) for the rear camera.
  • Loop Recording: When the SD card is full, the dash cam automatically overwrites the oldest unlocked video files to ensure continuous recording.
  • Emergency Recording: The device supports three ways for emergency recording:
    1. Built-in G-Sensor: Automatically locks the current 1/2/3 minute video segment upon detecting a collision or sudden movement. G-sensor sensitivity can be adjusted from level 1 to 9.
    2. Voice Control: Use the voice command "Lock the video" to manually protect the current recording.
    3. Manual Locking: Tap the "Lock" icon on the screen to protect the current recording.
Diagram showing three ways for emergency recording: G-sensor, voice control, and manual locking.

Image: Emergency Recording Methods

4.4. Smart Voice Control

The PG17 Max features smart voice control with built-in dual microphones for hands-free operation. Use the following commands:

Driver using voice commands for the dash cam, showing commands like 'Turn off recording', 'Lock the video', 'Take picture', 'Open recording', 'Show front camera', 'Show rear camera', 'Turn on WiFi', 'Open screen', 'Turn off display'.

Image: Smart Voice Control Commands

  • "Turn off recording"
  • "Turn off display"
  • "Lock the video"
  • "Take picture"
  • "Open recording"
  • "Show front camera"
  • "Show rear camera"
  • "Turn on WiFi"
  • "Open screen"

4.5. Built-in GPS & Route Tracking

The integrated GPS module accurately records your driving routes, locations, and speed data, which can be viewed directly on the video playback or through the dedicated app.

Screen showing GPS data including current altitude, total altitude, speed, coordinates, and date/time, with a map overlay.

Image: Built-in GPS and Route Tracking

4.6. 5.8GHz Wi-Fi & App Control

Connect your dash cam to the AZDOME app on your smartphone via 5.8GHz Wi-Fi for swift and seamless file transfer. The app allows for live view, sharing, downloading recordings, and adjusting settings. Ensure your phone is within 10ft of the dash cam for optimal connection.

Smartphone screens showing the AZDOME app interface for settings, album, and GPS tracking, with a comparison of 5.8GHz WiFi transfer speed versus other WiFi types.

Image: 5.8GHz WiFi and App Control

4.7. Advanced Driver Assistance Systems (ADAS)

The PG17 Max integrates ADAS features to enhance driving safety:

Video: Demonstration of ADAS features including Forward Collision, Lane Departure, Pedestrian Collision, Front Vehicle Start, Blind Spot Detection, and Lane Change Assist.

  • Forward Collision Warning: Monitors the road ahead and assesses dynamic changes in distance to vehicles in front, issuing alerts for potential collisions.
  • Forward Distance Warning: Maintains a safe following distance between your vehicle and the one ahead.
  • Front Vehicle Start Alert: Alerts you to start moving when the vehicle in front departs in congested traffic.
  • Pedestrian Collision Warning: Monitors and predicts the trajectories of pedestrians and bicycles in front of the vehicle.
  • Lane Departure Warning: Automatically detects lane markings and provides voice alerts when the vehicle drifts out of its lane.

4.8. Blind Spot Detection (BSD) & Lane Change Assist (LCA)

These features provide additional safety during lane changes and in heavy traffic:

Diagram illustrating Blind Spot Detection (BSD) and Lane Change Assist (LCA) with vehicles in blind spots and lane change scenarios.

Image: Blind Spot Detection and Lane Change Assist

  • Rear Collision Warning (BSD): Monitors the blind spot directly behind the vehicle, warning of potential rear-end collision risks.
  • Lane Change Assist (LCA): Monitors the blind spots on the sides and rear of the vehicle, enhancing safety during lane changes.

4.9. 24H Parking Monitor

With the optional hardwire kit, the PG17 Max provides continuous surveillance when your vehicle is parked:

Diagram showing G-Sensor Parking Monitor and 1/2/5 FPS Time-lapse Monitor for 24H parking surveillance.

Image: 24H Parking Monitor Features

  • G-Sensor Parking Monitor: If collisions or intrusions are detected, the dash cam automatically starts 1-minute recording, locking and saving the video for protection.
  • Time-lapse Monitor (1/2/5 FPS): In this mode, the dash cam records at a low frame rate, monitoring your vehicle continuously while conserving storage space.

4.10. Anti-Glare Technology

The dash cam features anti-glare technology to minimize interference from bright external light, enhancing picture clarity and reducing reflections for improved visibility of key details.

Comparison image showing an AZDOME screen with anti-glare technology versus another screen with significant glare and reflections.

Image: Anti-Glare Technology Comparison

5. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the screen and camera lenses. Avoid using abrasive cleaners or solvents.
  • SD Card: Regularly format your Micro SD card (at least once a month) to ensure optimal performance and prevent data corruption. Back up any important recordings before formatting.
  • Operating Environment: The dash cam is designed to operate in temperatures from -20°C to 65°C. Avoid exposing it to extreme temperatures outside this range.

6. Troubleshooting

  • Dash Cam not powering on: Check the power cable connection to the car charger and the dash cam. Ensure the car charger is securely plugged into the vehicle's 12V outlet.
  • Recording issues (e.g., not recording, corrupted files): Ensure a Class 10 or higher Micro SD card is used. Format the SD card regularly. If issues persist, try a different SD card.
  • GPS signal not found: Ensure the GPS module is installed with a clear view of the sky. Check the connection of the GPS module to the main unit.
  • Wi-Fi connection problems: Ensure the dash cam and your smartphone are within 10 feet of each other. Restart both the dash cam and your phone, then try reconnecting.
  • ADAS/BSD/LCA alerts not working: Ensure these features are enabled in the settings menu. Calibrate the system if necessary (refer to on-screen calibration guides). Ensure the camera lens is clean and unobstructed.
  • Screen not responding to touch: Restart the device. If the issue persists, contact customer support.
  • Can I add an internal camera? The AZDOME PG17 Max is designed with a front and rear camera system. An additional internal camera is not supported by this model.
  • Can I connect and disconnect Wi-Fi? Yes, you can connect and disconnect Wi-Fi through the dash cam's settings menu or by using the voice command "Turn on WiFi" / "Turn off WiFi".
  • Does this model have Starvis 2? While the product features a "NightShot Function" for improved low-light recording, specific details about Starvis 2 technology are not provided in the specifications.

7. Specifications

AttributeValue
Brand NameAZDOME
Item TypeCar DVR
Assembly ModeRearview Mirror
Camera Resolution3840x2160 (Front), 2560x1440 (Rear)
Pixels800Mega
Number Of Lenses2
Display Size12 inch
Screen Ratio16:9
DisplayIPS
Touch ScreenYes
Built-in ScreenYes
Video CodeH.265
Video FormatMP4
Frames Per Second30
Aperture1.8
Max External Memory512G
Memory Card Required Reading SpeedClass 10
Data Storage CapacityMax 512GB
GPS loggerExternal
Special FeaturesG-Sensor, motion detection, sd/mmc card, With Rearview Mirror, Real Time Surveillance, wifi function, Voice Control, Parking Monitor, adas, External GPS
Power SourceCorded Electric
Is Batteries IncludedNo
Working Temperature-20°C to 65℃
Weight1.066g
APP CompatibilityAPP Control
Audio RecordedYes
NightShot FunctionYes
Rear CameraYes
Original PackageYes
Loop-Cycle Recording FeatureYes
OSD LanguageChinese (Simplified), Chinese (Traditional), English, French, German, Italian, Spanish
InterfaceAV-In, USB 2.0, Wi-fi, Micro SD/TF
Chipset ManufacturerHISILICON
CertificationCE, FCC, RoHS, WEEE
OriginMainland China
High-concerned chemicalNone

8. Warranty & Support

The AZDOME PG17 Max comes with a 1-Year Warranty. For technical support, troubleshooting assistance, or warranty claims, please contact AZDOME customer service through their official channels.

9. User Tips

  • For the 24-hour parking monitor feature to function, ensure you have the optional hardwire kit installed.
  • When using the 5.8GHz Wi-Fi for app control and file transfer, keep your dash cam and smartphone within 10 feet for the best connection speed and stability.
  • Adjust the G-sensor sensitivity (levels 1-9) in the settings to prevent unnecessary emergency recordings from minor bumps or to ensure critical events are captured.
  • Regularly check for firmware updates via the AZDOME app to ensure your dash cam has the latest features and performance improvements.

© 2023 AZDOME. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.