1. Introduction
The UGREEN USB HUB Docking Station (Model CM841) is an all-in-one expansion companion specifically designed for the Mac Mini M4 and M4 Pro. It seamlessly integrates with your Mac Mini, providing extensive port expansion, an M.2 NVMe SSD enclosure for additional storage, and high-speed data transfer capabilities. This manual will guide you through the setup, operation, and maintenance of your docking station.

2. Safety Information
- Keep the device away from water, fire, and high temperatures.
- Do not attempt to disassemble or repair the device yourself.
- Use only a compatible 5V power adapter for the power input port to ensure stable operation.
- Ensure proper ventilation around the device to prevent overheating.
- This device is designed for indoor use only.

3. Package Contents
Please check the package for the following items:
- UGREEN USB HUB Docking Station (CM841)
- User Manual
- (Note: Specific accessories like power adapter or SSD are sold separately unless specified by retailer.)

4. Product Overview
The UGREEN Docking Station is designed to perfectly fit your Mac Mini M4/M4 Pro, expanding its connectivity and storage capabilities.
Key Features:
- 1:1 Perfect Fit: Seamlessly integrates with the Mac Mini's curvature.
- M.2 NVMe SSD Enclosure: Supports M.2 NVMe SSDs (2230/2242/2260/2280) up to 8TB.
- High-Speed Data Transfer: Up to 10Gbps for USB 3.2 ports and M.2 SSD.
- Multiple Ports: Includes USB-A, USB-C, SD, and TF card slots.
- Curved Base Design: Ensures Mac Mini cooling vents are not blocked.
- Recessed Power Button Slot: Allows easy access to the Mac Mini's power button without lifting.
- Anti-Slip Silicone Pad: Provides stable placement and protection.

Port Layout:

- Front Ports:
- 2x USB-A 3.2 (10Gbps)
- 1x SD Card Slot
- 1x TF Card Slot
- Rear Ports:
- 2x USB-A 3.0 (5Gbps)
- 1x USB-A 3.2 (10Gbps)
- 2x USB-C 3.2 (10Gbps)
- 1x USB-C (IN 5V) for external power supply
- Internal:
- 1x M.2 NVMe SSD Slot (10Gbps)
The docking station connects to your Mac Mini via a short, integrated USB-C cable (approx. 4cm).
5. Setup Instructions
5.1. M.2 NVMe SSD Installation
To expand your storage, follow these steps to install an M.2 NVMe SSD:

- Disconnect: Disconnect the docking station from all external devices and power. Flip it upside down.
- Loosen Screws: Loosen the screws on the bottom panel and carefully remove the panel.
- Loosen M.2 SSD Screw: Locate the M.2 SSD slot and loosen the small screw designed to secure the SSD.
- Insert SSD: Gently insert your M.2 NVMe SSD into the slot at an angle, then press it down and secure it with the screw.
- Reattach Panel: Reattach the bottom panel and tighten the screws.
- Connect: Connect the docking station to your Mac Mini. If the drive appears on your computer, the installation is successful.

5.2. Connecting to Mac Mini
- Place your Mac Mini M4/M4 Pro directly on top of the UGREEN Docking Station. The design ensures a perfect fit and alignment.
- Connect the integrated short USB-C cable from the docking station to an available USB-C port on your Mac Mini.
- (Optional) For stable operation, especially when using multiple high-power devices or the M.2 SSD, connect a 5V power adapter (not included) to the 'IN 5V' USB-C port on the rear of the docking station.
- Connect your peripherals (USB drives, keyboard, mouse, SD/TF cards) to the available ports on the docking station.
6. Operating Instructions
Once connected, the UGREEN Docking Station functions as a plug-and-play device. Your Mac Mini will automatically detect the connected peripherals and the M.2 SSD (if installed).
- Data Transfer: Utilize the USB-A and USB-C ports for connecting external drives, flash drives, and other USB devices. The 10Gbps ports offer high-speed data transfer for large files.
- Card Reading: Insert SD or TF cards into their respective slots for quick access to photos and videos. The docking station supports simultaneous reading and writing for both card types.
- SSD Usage: The installed M.2 NVMe SSD will appear as an external drive on your Mac Mini. You can use it for additional storage, backups, or running applications.
- Power Button Access: The recessed groove allows you to easily press the Mac Mini's power button without needing to lift the entire setup.


7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the docking station. Do not use liquid cleaners or aerosols.
- Ventilation: Ensure the curved base design is not obstructed to maintain proper airflow for your Mac Mini.
- Storage: When not in use for extended periods, disconnect the device from power and store it in a cool, dry place.
8. Troubleshooting
- Device Not Recognized:
- Ensure the USB-C cable connecting the docking station to the Mac Mini is securely plugged in.
- Try connecting to a different USB-C port on your Mac Mini.
- Restart your Mac Mini.
- SSD Not Detected:
- Verify that the M.2 NVMe SSD is correctly installed and secured within the enclosure (refer to Section 5.1).
- Check if the SSD is properly formatted for macOS. You may need to use Disk Utility to initialize and format a new SSD.
- Peripherals Not Working:
- Ensure the peripheral is properly connected to the docking station port.
- If using multiple power-hungry devices, connect an external 5V power adapter to the 'IN 5V' port on the docking station.
- Try connecting the peripheral directly to your Mac Mini to rule out device issues.
- Slow Data Transfer:
- Ensure you are using the 10Gbps USB 3.2 ports for high-speed devices.
- Verify that your connected device (e.g., external SSD) supports 10Gbps speeds.
- Connect an external 5V power adapter to the 'IN 5V' port to ensure sufficient power delivery.
9. User Tips
- Compatibility: This docking station is primarily designed for Mac Mini M4/M4 Pro and macOS. While its USB ports may function with other PCs, the form factor and M.2 NVMe enclosure are optimized for the Mac Mini.
- Stacking Height: When stacked with a Mac Mini M4, the total height of the combined unit is approximately 78mm. Consider this dimension if placing it under a monitor or in a confined space.
- Power Supply: For optimal performance and stability, especially when utilizing the M.2 SSD and multiple USB devices simultaneously, it is highly recommended to connect an external 5V power adapter to the dedicated 'IN 5V' USB-C port on the docking station.
10. Specifications
| Feature | Detail |
|---|---|
| Brand | UGREEN |
| Product Name | Mac mini M.2 SSD Enclosure Docking Station Base |
| Model Number | CM841 |
| Compatible PC Devices | Mac Mini M4, Mac Mini M4 Pro |
| Compatible Systems | MacOS |
| SSD/HDD Slot | M.2 NVMe (Supports 2230/2242/2260/2280, up to 8TB) |
| Interface Type | USB 3.2 Gen 2 |
| USB-A Output Ports | 3x USB-A 3.2 (10Gbps), 2x USB-A 3.0 (5Gbps) |
| USB-C Output Ports | 2x USB-C 3.2 (10Gbps) |
| SD/TF Card Slots | Supports Dual SD/TF Card Reading (104MB/s) |
| Input Port (to Mac Mini) | 1x USB-C Male (USB 3.2 Gen2, 10Gbps, no PD charging for main device) |
| Power Input Port | 1x USB-C Female (5V power adapter, 15W max) |
| Material | Aluminum Alloy + PVC |
| Cable Length | ≈4cm |
| Net Weight | 250g |
| Dimensions (Docking Station) | 127mm x 127mm x 29.1mm |
| Total Height (with Mac Mini) | ≈78mm |
| Certification | CE, FCC |


11. Warranty and Support
UGREEN products are designed to meet high-quality standards. For warranty information, technical support, or customer service inquiries, please refer to the official UGREEN website or contact your local retailer. Keep your purchase receipt for warranty claims.