WRWD Wireless CarPlay Android Auto Interface for Audi A8 (2012-2018)

Contents

WRWD Wireless CarPlay Android Auto Interface for Audi A8 (2012-2018)

User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your WRWD Wireless CarPlay and Android Auto Interface module. This module is designed to seamlessly integrate with your Audi A8 (2012-2018) MMI 3G+ system, enhancing your driving experience with modern connectivity features.

WRWD Wireless CarPlay & Android Auto module and car screen interface
Overview of the WRWD Wireless CarPlay & Android Auto module and its interface on the car screen.

2. Compatibility

This interface module is specifically designed for Audi A8 models manufactured between 2012 and 2018, equipped with the MMI 3G+ system. To verify compatibility:

  1. Press the "Setup" or "Menu" button on your car's radio.
  2. Go to "Settings".
  3. Scroll down to "Version Information".
  4. Look for the first letters and numbers of the software version. The system should be MMI 3G+ (beginning with HN+).
Compatibility check for Audi A8 MMI 3G+ system
Visual guide for checking MMI 3G+ software version. Compatible with A8 2012-2018, not compatible with A8 2019-2021.

3. Setup and Installation

Professional installation is recommended. Ensure the vehicle's power is off before beginning installation.

3.1 Components Overview

CarPlay module dimensions and included cables
CarPlay module with dimensions (135mm x 70mm x 20mm) and included accessories: LVDS cable (1 pc), Power cable, Wi-Fi antenna.

3.2 Installation Steps

Refer to the installation video for a visual guide:

Installation guide for the WRWD Wireless CarPlay Android Auto Interface module in an Audi A8.
  1. Remove Air Conditioning Panel: Carefully remove the air conditioning panel.
  2. Connect CarPlay Adapter Cable: Insert the CarPlay adapter cable into both the air conditioning panel and the original vehicle's red wiring harness.
  3. USB Cable Reservation: Reserve the USB cable from the CarPlay power cord near the storage box. This is for future upgrades.
  4. Connect CAN Line: Connect the extra CAN line of the adapter cable to the orange CAN line of the CarPlay power cord.
  5. Insert CarPlay Module: Insert the CarPlay module into the corresponding wiring harness.
  6. Install Wi-Fi Antennas: Pay attention to installing Wi-Fi antennas in non-metallic areas to ensure optimal signal reception.

4. Operating Instructions

The WRWD module provides a range of features to enhance your in-car experience:

4.1 Key Features

  • Wireless Android Auto: Connect your Android smartphone wirelessly for navigation, music, and apps.
  • Wireless CarPlay: Connect your iPhone wirelessly for navigation, music, calls, and Siri.
  • Map Navigation: Compatible with multiple mainstream map navigation applications, supporting both offline and online maps.
  • Phone Calls: Make and receive hands-free phone calls directly through the car's system.
  • Siri Integration: One-click wake-up for Siri voice assistant.
  • USB Flash Player: Play media directly from a USB flash drive.
  • Reverse and Front Camera Support: Integrates with existing or aftermarket reverse and front cameras for enhanced safety.
  • Original Steering Wheel Control: Maintain control using your vehicle's original steering wheel buttons.
  • Original Bluetooth: Utilize the original car speakers for lossless sound quality via Bluetooth.
Grid of product features including wireless Android Auto, CarPlay, phone calls, Siri, USB player, camera support, and original controls.
Visual representation of the module's key features.
Original car control features: reversing camera, steering wheel, rotary button.
The module supports original car controls for convenience.
Car screen displaying map navigation with ETA.
Map navigation interface on the car display.
Car screen displaying music playback via original Bluetooth.
Music playback via original Bluetooth for lossless sound quality.
Car screen displaying hands-free phone call interface.
Hands-free phone call interface for convenient communication.

5. Maintenance

To ensure the longevity and optimal performance of your WRWD interface module:

  • Keep the module and connections free from dust and moisture.
  • Avoid exposing the module to extreme temperatures.
  • Regularly check for firmware updates (if available) to ensure compatibility and access to new features.
  • Do not attempt to open or modify the module, as this may void the warranty.

6. Troubleshooting

If you encounter issues with your WRWD module, try the following steps:

  • No Power: Ensure all power connections are secure and correctly installed. Check the vehicle's fuse box for any blown fuses related to the infotainment system.
  • No Signal/Display: Verify that the LVDS cable is properly connected between the module and the car's display. Ensure the correct input source is selected on your car's MMI system.
  • Wireless Connectivity Issues (CarPlay/Android Auto): Make sure your smartphone's Wi-Fi and Bluetooth are enabled. Try restarting your phone and the car's infotainment system. Ensure the Wi-Fi antenna is installed in a non-metallic area for optimal signal.
  • Sound Issues: Check the audio input selection on your car's MMI system. Ensure the volume on both your phone and the car's system is adjusted appropriately.
  • Controls Not Responding: Confirm that the module is correctly integrated with the car's CAN bus system. Restart the car's infotainment system.

If problems persist, contact customer support for further assistance.

7. Specifications

FeatureSpecification
Brand NameWRWD
Model CompatibilityAudi A8 (2012-2018)
Din SizeOne Din
Display Size2.5" (Interface for existing screen)
Is Touch ScreenYes (Utilizes existing touch screen functionality if available, or rotary control)
Voltage12 V
Item Weight0.8 kg
Output TypeBlack and White (Refers to display mode, not color output)
Special FeaturesWi-Fi Function, CarPlay, Android Auto
Digital Media FormatCD (Refers to compatibility with original system, not module input)
OSD LanguageMulti-language support including English, Chinese, Arabic, German, French, Korean, Japanese, Spanish, etc.
OriginMainland China
CertificationCE, FCC, RoHS
Package Dimensions (L x W x H)20 cm x 15 cm x 5 cm
Package Weight0.8 kg

8. Warranty and Support

Your WRWD Wireless CarPlay Android Auto Interface module comes with certain service commitments:

  • Product Damage: Refunds are available if items are damaged upon arrival.

For further support or warranty claims, please contact the seller directly.

9. User Tips

No specific user tips or common questions were available from the provided data. For best performance, ensure your smartphone's operating system is up-to-date and compatible with the latest versions of CarPlay or Android Auto.

© 2025 WRWD. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.